CEB Press/Manufacturing Instructions/Valve Mount

From Open Source Ecology
< CEB Press‎ | Manufacturing Instructions
Revision as of 15:17, 26 September 2011 by Bkufa (talk | contribs) (Created page with "{{Category=CEB press building instructions}} {{Template:CEB Press Manufacturing Instructions Navbox}} thumb|400px The valve mount holds the hydraulic sol...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Main > Housing and construction > CEB Press > CEB press building instructions

v · d · eCEB Press Manufacturing Instructions
Prepare
Components Fabrication
Structural
Hydraulics
Moving metal parts:
Electronics
Programming
Finish
Paint  · Test
File:Valvemount.jpg

The valve mount holds the hydraulic solenoid valves to the primary arm.

Tools required

  • Hole puncher with 13/16" Dies
  • Drill Press with 1/4" or larger bit.

Materials required

  • 1/4"x6" flatbar: 12"

Fabrication instructions

  1. Find your Hydraulic valve and locate its mounting holes on the back. Put the plate under it so that the mounts on the valve align with the top of the plate.
  2. Use spray paint to mark the holes on the mount's location to the 6x12 plate.
  3. Drill the holes to at least a 1/4" large (you might want to oversize them a bit, as it very difficult to get them in the perfect location.)
  4. Punch 13/16 holes 1" in and .75" up at the bottom of the plate.
Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_Press/Manufacturing_Instructions/Valve_Mount&oldid=43112"