AbeAnd Log
Status - Done: Electronics Parts To Do: Assembly - Wiring - Other Modules Blocks: Time
General links Critical Path Roadmap HR mediawiki formatting help Development Team Log Volunteer Timesheet OSE Hangout OSE Jitsi Meet
Abe's Links Abe's OSE Google Drive Folder Abe's OSE Google Calendar Abe's YouTube channel
Thurs Jul 13, 2017
worked on wiring layout in working doc and considering how to minimally draw or identify wiring in assembly.
I also found some other confusion between extruder spooler parts. I noticed the VRM before, but there is also a 12V PSU different from the 24V in the extruder.
I'm thinking the best strategy is to work through and verify all individual parts before working on assemblies so that no errors are propagated further than necessary.
I think following July 11 Refined Process slide should be followed in order for all parts before we focus on assemblies.
Found more errors/missing data.
3 hrs.
Wed Jul 12, 2017
I looked over progress on several CAD files, the part library, and working doc. I found some interesting examples of work in the CAD files.
Read/Wrote some communications on network and email.
I reviewed the File Simplification process since I had not read all the way through the completed doc and I definitely needed to do so before attempting any assembly and wiring. It is somewhat like I thought. Primitive shapes are smaller. I am curious about any differences for methods of adding, subtracting, unions, boolean ops, versus sketch pads/pockets. The process for managing files and assemblies, positioned files etc. is more complex than I thought.
Tues Jul 11, 2017
editing wiki parts library.
uploaded images of CAD files. I'm thinking since we are linking to the CAD files we should capture screen shots and use those not external photos.
Doing more CAD work on Switch.
Thinking about wiring paths, but that isn't easy to add until doing a module assembly.
meeting Prep
More CAD files. I see there was some confusion on the VRM for extruder vs. spooler so I think I'll pick up the other VRM for the spooler.
I created images for the parts from FreeCAD view because those are the parts we are linking to and so as not to use external copyrighted images.
4 hrs
Sun Jul 9, 2017
I'm back from unexpected travels last week. I have a lot of catch-up to do & still have some files to submit from last weekend when the wiki was down...
File:LFX Solid State Relay.fcstd
Old Logs
2017
- AbeAnd Logs January
- AbeAnd Logs February
- AbeAnd Logs March
- AbeAnd Logs April
- AbeAnd Logs May
- AbeAnd Logs June
- AbeAnd Logs July
- AbeAnd Logs August
- AbeAnd Logs September
- AbeAnd Logs October
- AbeAnd Logs November
- AbeAnd Logs December