CEB Press/Manufacturing Instructions/Brick Holder Plate

The brickholder plate attaches to the primary arms and is where the bricks go when the machine spits them out. You could also replace the plate with some rollers.

Tools Required

• Hole Punch with 1" dies

Materials

• 1/4" Plate: 17"x29"

Diagrams

Wanted: Better diagram

The brickholder plate hole locations.

Fabrication steps

Punch the 1" holes in the proper locations. They are 1 1/4" away from 17" side, and 2" away from 29" side.