CEB Press/Manufacturing Instructions/Dirt-Keeper Plate

From Open Source Ecology

< CEB Press‎ | Manufacturing Instructions

Revision as of 00:35, 5 October 2011 by Bkufa (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Main > Housing and construction > CEB Press > CEB press building instructions

CEB Press Manufacturing Instructions

Prepare

Safety · Workspace · Tools · Raw Materials

Components Fabrication

Structural	Primary Arms · Secondary Arms · Feet · Main Frame Preparation · Main Frame Assembly · Soil grate · Grate mounts · Hopper (sheet metal) · Hopper (mounting plate) · Hopper (supports) · Leg Holders · Controller Mount · Dirt-keeper Plate · Brick Holder Plate · Valve mount

Hydraulics	Main Cylinder Preparation · Secondary cylinder hose unit · Soil Shaker motor unit

Moving metal parts:	Roller guides · Soil loading drawer · Soil Shaker

Electronics	Controller Box · Detroit_Fab_Lab_Solenoid_Driver

Programming

Github OSE Code Repository · Control Source Code v1.01 Annotated · Control Source Code v1.01 · Control Source Code v1.0 · Control Source Code v1.0 Explained

Finish

The dirt-keeper plate prevents dirt from falling out of the drawer when it is fully retracted.

Tools required

Hole punch with 1" dies

Materials required

1/8" plate: 28.75"x13.5"

Diagrams

The hole locations

Fabricating instructions

Punch the 1" holes in the proper locations: 1.25" from the 13.5" edge, and 1.75" from the 28.75" side.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_Press/Manufacturing_Instructions/Dirt-Keeper_Plate&oldid=44383"