Steam Engine Bill of Materials: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
 
(37 intermediate revisions by the same user not shown)
Line 2: Line 2:


{{ToolTemplate|ToolName=Steam Engine}}
{{ToolTemplate|ToolName=Steam Engine}}
'''Standard Table Layout'''
{| cellpadding="6" cellspacing="0" border="1"
! PART NAME
! QTY
! PURPOSE
! COST
! SOURCE
|-
!
|
|
|
|
|}
TBD:  Convert the information below into the table format above.<br>
Part Name can be linked to it's specification page (if one exists).<br>


'''Bump Valve Engine Design''' ([[Steam Engine Design]])
'''Bump Valve Engine Design''' ([[Steam Engine Design]])
Line 8: Line 28:
|-
|-
!QTY
!QTY
!Description
!Name
!Dimensions
!Fabrication/Specification
!Price
!Price
!Location
!Location
|-
|-
|1
|1
|Cylinder, 4.25 I.D, 4.75" O.D., Cast Iron, 6" long
|'''Cylinder Liner'''
|4" Bore, 4.25" O.D., Cast Iron, 6" long (no. 2001SB)
|[[Steam Engine Specifications/Cylinder Liner]]
|79.23
|[http://www.advancedsleeve.com/2010_ASC_Catalog.pdf]
|-
|1
|'''Cylinder Case'''
|4.25 I.D, 4.75" O.D., Cast Iron, 6" long
|[[Steam Engine Build/Cylinder Case]]
|
|
|
|
|-
|-
|2
|2
|Cylinder Flanges, 4.75 I.D, 5.75" O.D., 0.5" thick, Cold rolled steel, 6" long
|'''Cylinder Flanges'''
|
|4.75 I.D, 5.75" O.D., 0.5" thick, Cold rolled steel, 6" long
|
|[[Steam Engine Build/Cylinder Case]]
|197.15 for 16"
|[http://www.mcmaster.com/#iron-tubing/=cmbrsc]
|-
|-
|1
|1
|Cylinder Sleeve, 4" Bore, 4.25" O.D., Cast Iron, 6" long (no. 2001SB)
|'''Piston'''
|79.23
|2" x 4" OD Cast Iron Steel
|[http://www.advancedsleeve.com/2010_ASC_Catalog.pdf]
|[[Steam Engine Build/Piston Head]]
|-
|1
|Piston 4" x 5/8" Cold rolled Steel
|
|
|[http://www.discountsteel.com/index.cfm/go/main.itemDisplay/itemID/13.htm]
|[http://www.discountsteel.com/index.cfm/go/main.itemDisplay/itemID/13.htm]
|-
|-
|2
|2
|Piston Rings 4" O.D. Cast Iron (no. 844-E251X)
|'''Piston Rings'''
|9.50
|4" O.D. Cast Iron (no. 844-E251X), 5/64" wide (0.078")
|[[Steam Engine Specifications/Piston Rings]]
|4.75 ea.
|[http://www.jegs.com/p/Sealed-Power/Federal-Mogul-OE-Quality-Piston-Rings/746913/10002/-1]
|[http://www.jegs.com/p/Sealed-Power/Federal-Mogul-OE-Quality-Piston-Rings/746913/10002/-1]
|-
|-
|2
|2
|Piston Bump Pin
|'''Bump Valve Pin'''
|1.23" OD
|[[Steam Engine Build/Bump Valve Pin]]
|
|
|
|
|-
|-
|1
|1
|Connecting rod 5/8"x1"x6"
|'''Piston Connecting Rod'''
|5/8"x1"x6"
|[[Steam Engine Build/Piston Connector Rod]]
|9.91
|9.91
|[http://www.discountsteel.com/index.cfm/go/main.itemDisplay/itemID/11.htm]
|[http://www.discountsteel.com/index.cfm/go/main.itemDisplay/itemID/11.htm]
|-
|-
|1
|1
|Connecting rod bearings
|'''Connector Rod Bearings'''
|
|1" bore, 1/2" wide, 52mm OD (2.047"), sealed
|
|[[Steam Engine Specifications/Connector Rod Bearings]]
|3.90
|[http://www.thebigbearingstore.com/servlet/the-446/6205-dsh-2RS-1-Radial-Ball/Detail]
|-
|-
|1
|1
|Cylinder End Cap w/ Valve Seats
|'''Cylinder Valve Seats'''
|(complex)
|[[Steam Engine Build/Cylinder Valve Seats]]
|
|
|
|
|-
|-
|2
|2
|Cylinder End Cap Bolts
|'''Cylinder End Cap Bolts'''
|Half inch dia.
|[[Steam Engine Specifications/Nuts and Bolts]]
|
|
|
|
|-
|-
|1
|1
|Valve Cover
|'''Valve Cover'''
|(complex)
|[[Steam Engine Build/Valve Cover]]
|
|
|
|
|-
|-
|2
|2
|Valve Spring Bolts
|'''Valve Spring Bolts'''
|Half inch dia
|[[Steam Engine Specifications/Nuts and Bolts]]
|
|
|
|
|-
|-
|2
|2
|Valve Springs
|'''Valve Springs'''
|O.D. is 1.230", I.D. is 0.876", Load: 162lbs  at 1.475"
|[[Steam Engine Specifications/Valve Springs]]
|2.87 ea.
|[http://www.jegs.com/i/Comp+Cams/249/980-16/10002/-1]
|-
|2
|'''Bump Valves'''
|1.23" dia
|[[Steam Engine Build/Valve]]
|
|
|
|
|-
|-
|2
|2
|Bump Valves
|'''Cylinder Mounting Bracket'''
|(complex)
|[[Steam Engine Build/Cylinder Mounting Bracket]]
|
|
|
|
|-
|-
|1
|1
|Water Drain Plug
|'''Oil Dribbler'''
|
|
|
|[[Steam Engine Build/Oil Dribbler]]
|-
|1
|Oil Dribbler
|
|
|
|
|-
|-
|2
|4
|Exhaust Plenum
|'''Exhaust Plenum'''
|(complex)
|[[Steam Engine Build/Exhaust Plenum]]
|
|
|
|
Line 104: Line 160:
|-
|-
!QTY
!QTY
!Description
!Name
!Dimensions
!Fabrication/Specification
!Price
!Price
!Location
!Location
|-
|-
|1
|2
|Shaft 1"
|'''Shaft'''
|1" dia
|[[Steam Engine Build/Shaft]]
|13.01
|13.01
|[http://www.discountsteel.com/index.cfm/go/main.itemDisplay/itemID/13.htm]
|[http://www.discountsteel.com/index.cfm/go/main.itemDisplay/itemID/13.htm]
Line 115: Line 175:
|-
|-
|1
|1
|Flywheel 8"x2.5" Cold Rolled Steel
|'''Flywheel'''
|74.3
|45 lb. weight plate, 2" hole
|[[Steam Engine Specifications/Flywheel]]
|45.00
|[http://www.discountsteel.com/index.cfm/go/main.itemDisplay/itemID/13.htm]
|[http://www.discountsteel.com/index.cfm/go/main.itemDisplay/itemID/13.htm]
|-
|-
|1
|2
|Eccentric 4.5" x .5" Cold rolled
|'''Crank Pin'''
|13.95
|.5" Dia, 1.75" Long
|[[Steam Engine Build/Crank]]
|6.29
|[http://www.discountsteel.com/index.cfm/go/main.itemDisplay/itemID/13.htm]
|[http://www.discountsteel.com/index.cfm/go/main.itemDisplay/itemID/13.htm]
|-
|-
|2
|2
|.5" Dia Pin 1.75" Long
|'''Crank Arm Counterweight'''
|6.29
|
|[http://www.discountsteel.com/index.cfm/go/main.itemDisplay/itemID/13.htm]
|[[Steam Engine Build/Crank]]
|
|
|-
|2
|'''Crank Arm'''
|.5" thick, TBD Long
|[[Steam Engine Build/Crank]]
|
|
|-
|2
|'''Pillow Block'''
|1" ID
|[[Steam Engine Specifications/Pillow Block Sources]]
|7.25
|[http://www.bearingsdirect.com/store/index.php?l=product_detail&p=1376]
|-
|2
|'''Pillow Block Support'''
|1" ID
|[[Steam Engine Specifications/Pillow Blocks]]
|
|
|-
|2
|'''Nylon Bushings'''
|1" ID, 0.25" wide
|[[Steam Engine Specifications/Bushing Sources]]
|
|[http://www.totalplastics.com/products/275]
|-
|-
|}
|}
Line 136: Line 230:
|-
|-
!QTY
!QTY
!Description
!Name
!Dimensions
!Fabrication/Specification
!Price
!Price
!Location
!Location
|-|1
|-
|6' Sch 80 Steam Pipe
|1
|'''Steam Pipe''', (Cylinder Case Material)
|6' Sch 80  
|[[Steam Engine Build/Cylinder Case]]
|43.7
|43.7
|[http://www.amazon.com/dp/B001NPLLW2/ref=sr_1_3?ie=UTF8&m=AH1JDG368QYFS]
|[http://www.amazon.com/dp/B001NPLLW2/ref=sr_1_3?ie=UTF8&m=AH1JDG368QYFS]
|-
|-
|1
|1
|Baseplate TBD
|'''Base Plate'''
|1" thick
|[[Steam Engine Build/Base Plate]]
|
|
|
|
|-
|-
|1
|1
|Crankshaft Enclosure
|'''Crankshaft Enclosure'''
|sheet metal
|
|
|
|
|
|-
|2
|'''Optional Sensor Vent'''
|0.25" threaded nipple, 2" long
|[[Steam Engine Build/Optional Sensor Vent]]
|
|
|-
|Tube
|'''Thread Sealer'''
|
|[[High Temperature Thread Sealer]]
|
|
|-
|Gal
|'''Mineral Oil'''
|Engine lube
|
|14
|[http://www.google.com/products/catalog?hl=en&rlz=&q=mineral+oil&um=1&ie=UTF-8&tbm=shop&cid=17451421744772089907&sa=X&ei=vRPtTb3_DYe-0AHCyOC-AQ&ved=0CEoQ8wIwAQ]
|-
|-
|}
|}
Line 162: Line 286:


See also [[Steam Engine Bill of Materials/2009]].
See also [[Steam Engine Bill of Materials/2009]].
[[Category:Steam Engine]]
[[Category:BOM]]

Latest revision as of 12:06, 21 June 2011

Main > Energy > Steam Engine


Steam Engine
   Home  |  Research & Development  |  Bill of Materials  |  Manufacturing Instructions  |  User's Manual  |  User Reviews    Steam Engine.png


Standard Table Layout

PART NAME QTY PURPOSE COST SOURCE

TBD: Convert the information below into the table format above.
Part Name can be linked to it's specification page (if one exists).


Bump Valve Engine Design (Steam Engine Design)

QTY Name Dimensions Fabrication/Specification Price Location
1 Cylinder Liner 4" Bore, 4.25" O.D., Cast Iron, 6" long (no. 2001SB) Steam Engine Specifications/Cylinder Liner 79.23 [1]
1 Cylinder Case 4.25 I.D, 4.75" O.D., Cast Iron, 6" long Steam Engine Build/Cylinder Case
2 Cylinder Flanges 4.75 I.D, 5.75" O.D., 0.5" thick, Cold rolled steel, 6" long Steam Engine Build/Cylinder Case 197.15 for 16" [2]
1 Piston 2" x 4" OD Cast Iron Steel Steam Engine Build/Piston Head [3]
2 Piston Rings 4" O.D. Cast Iron (no. 844-E251X), 5/64" wide (0.078") Steam Engine Specifications/Piston Rings 4.75 ea. [4]
2 Bump Valve Pin 1.23" OD Steam Engine Build/Bump Valve Pin
1 Piston Connecting Rod 5/8"x1"x6" Steam Engine Build/Piston Connector Rod 9.91 [5]
1 Connector Rod Bearings 1" bore, 1/2" wide, 52mm OD (2.047"), sealed Steam Engine Specifications/Connector Rod Bearings 3.90 [6]
1 Cylinder Valve Seats (complex) Steam Engine Build/Cylinder Valve Seats
2 Cylinder End Cap Bolts Half inch dia. Steam Engine Specifications/Nuts and Bolts
1 Valve Cover (complex) Steam Engine Build/Valve Cover
2 Valve Spring Bolts Half inch dia Steam Engine Specifications/Nuts and Bolts
2 Valve Springs O.D. is 1.230", I.D. is 0.876", Load: 162lbs at 1.475" Steam Engine Specifications/Valve Springs 2.87 ea. [7]
2 Bump Valves 1.23" dia Steam Engine Build/Valve
2 Cylinder Mounting Bracket (complex) Steam Engine Build/Cylinder Mounting Bracket
1 Oil Dribbler Steam Engine Build/Oil Dribbler
4 Exhaust Plenum (complex) Steam Engine Build/Exhaust Plenum

Crankshaft (Steam Engine Crank)

QTY Name Dimensions Fabrication/Specification Price Location
2 Shaft 1" dia Steam Engine Build/Shaft 13.01 [8]
1 Flywheel 45 lb. weight plate, 2" hole Steam Engine Specifications/Flywheel 45.00 [9]
2 Crank Pin .5" Dia, 1.75" Long Steam Engine Build/Crank 6.29 [10]
2 Crank Arm Counterweight Steam Engine Build/Crank
2 Crank Arm .5" thick, TBD Long Steam Engine Build/Crank
2 Pillow Block 1" ID Steam Engine Specifications/Pillow Block Sources 7.25 [11]
2 Pillow Block Support 1" ID Steam Engine Specifications/Pillow Blocks
2 Nylon Bushings 1" ID, 0.25" wide Steam Engine Specifications/Bushing Sources [12]

Other Pieces

QTY Name Dimensions Fabrication/Specification Price Location
1 Steam Pipe, (Cylinder Case Material) 6' Sch 80 Steam Engine Build/Cylinder Case 43.7 [13]
1 Base Plate 1" thick Steam Engine Build/Base Plate
1 Crankshaft Enclosure sheet metal
2 Optional Sensor Vent 0.25" threaded nipple, 2" long Steam Engine Build/Optional Sensor Vent
Tube Thread Sealer High Temperature Thread Sealer
Gal Mineral Oil Engine lube 14 [14]


TOTAL = ???

Alternatively Cast Iron Cylinder Material can be found http://www.mcmaster.com/#8929k18/=gnvh3 for 41.47 per cylinder

See also Steam Engine Bill of Materials/2009.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Steam_Engine_Bill_of_Materials&oldid=31856"