CEB Press/Manufacturing Instructions/Brick Holder Plate: Difference between revisions
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
=Materials= | =Materials= | ||
*1/8" Plate: 16 | *1/8" Plate: 16"x28 3/4" | ||
=Diagrams= | =Diagrams= | ||
Revision as of 03:55, 5 October 2011
Main > Housing and construction > CEB Press > CEB press building instructions
| |||||||||||||||||||||||||
The brickholder plate attaches to the primary arms and is where the bricks go when the machine spits them out. You could also replace the plate with some rollers.
Tools Required
- Hole Punch with 1" dies
Materials
- 1/8" Plate: 16"x28 3/4"
Diagrams
Fabrication steps
Punch the 1" holes in the proper locations. They are 1 1/4" away from 16.5" side, and 1 3/4" away from 28 3/4" side.