January 2020 Open Source Microfactory STEAM Camp: Difference between revisions
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
=Mon Jan 27, 2020= | =Mon Jan 27, 2020= | ||
*Assets generated Texas - 3D print at 3.175 scale and 1.2 mm nozzle - [https://www.facebook.com/groups/398759490316633/permalink/1270764066449500/] | *Assets generated Texas - 3D print at 3.175 scale and 1.2 mm nozzle - [https://www.facebook.com/groups/398759490316633/permalink/1270764066449500/] | ||
*Videos of electronic build | *Videos of electronic build - up to [Heat Tightening 4] at https://www.youtube.com/user/marcinose/videos?view_as=subscriber | ||
*[[Jeremy Log]] - first print procedure with Babystepping Correction | *[[Jeremy Log]] - first print procedure with Babystepping Correction | ||
*Assets generated Richmond - [[Chris Log]]- bearing | *Assets generated Richmond - [[Chris Log]]- bearing | ||
Revision as of 15:00, 27 January 2020
Participants
Marcin Log - Chris Log - Michel Log - Benedikt Log - Unai Log - Beber Log - Don Log - Xiong Log - Yale Log - Jeremy Log - Fouad Log - Liam Log - Pieter Log - Holger Log - Tom Log - Luke Log - Jessica Log - Yang Log - Devin Log - Kevin Log - Jonathan Log
Mon Jan 27, 2020
- Assets generated Texas - 3D print at 3.175 scale and 1.2 mm nozzle - [1]
- Videos of electronic build - up to [Heat Tightening 4] at https://www.youtube.com/user/marcinose/videos?view_as=subscriber
- Jeremy Log - first print procedure with Babystepping Correction
- Assets generated Richmond - Chris Log- bearing