CEB Press/Manufacturing Instructions/Arms - primary: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 14: | Line 14: | ||
== Diagrams == | == Diagrams == | ||
Left | |||
<html> | |||
<iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=4b3895a4daf1bff5b38804396e417a9b&etyp=im&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe> | |||
</html> | |||
Right | |||
<html> | |||
<iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=f3f1afb53da762bcb38804396e417a9b&etyp=im&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe> | |||
</html> | |||
== Fabrication Steps == | == Fabrication Steps == | ||
Revision as of 03:44, 18 September 2011
| |||||||||||||||||||||||||
The primary arms attach the cylinder/frame assembly to the secondary arms, which support it. They also attach to the plate which holds the recently pressed bricks, and the support plate which prevents the dirt in the drawer from falling out of it.
Tools Required
Hole punch with 13/16" and 3/4" dies
Materials Required
- 2 pieces 72" long - 4"x6"x3/8" angle steel
Diagrams
Left
Right
Fabrication Steps
Punch the 3/4" holes and then the 13/16" holes.
- The holes are all to be punched in the 4" side of the angle iron, in 1 1/4" from the edge of it.
- The 3/4" holes are located 2" and 70" from one end of the angle iron. The two arms will be mirror images of one another. (These holes are slightly smaller than the others to minimize play between the primary and secondary arms, preventing extra vibrations on the frame.)
- The 13/16" hole centers are located at 15", 31", 37", 39 5/8", 48 3/8", 53", and 64" from one end of the angle iron. Make the two arms mirror images of one another.