CEB Press/Manufacturing Instructions/Hopper supports: Difference between revisions
Jump to navigation
Jump to search
(+warning) |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Template:CEB Press Manufacturing Instructions Navbox}} | {{Template:CEB Press Manufacturing Instructions Navbox}} | ||
{{Warning|The documentation for the CEB Press is undergoing a thorough overhaul. CAD models and written directions are presently obsolete. For more information, see [[Talk:CEB_Press#Documentation_overhaul_in_progress]]. When the models, specifications and text on this article have been thoroughly reviewed, updated when necessary, and confirmed as whole and accurate, this warning may be removed.}} | {{Warning|The documentation for the CEB Press is undergoing a thorough overhaul. CAD models and written directions are presently obsolete. For more information, see [[Talk:CEB_Press#Documentation_overhaul_in_progress]]. When the models, specifications and text on this article have been thoroughly reviewed, updated when necessary, and confirmed as whole and accurate, this warning may be removed.}} | ||
The hopper supports attach to the hopper, and attaches to the main frame via leg holders. They also hold the [[CEB Press/Manufacturing Instructions/Soil Shaker|Soil Shaker]] | |||
== Tools Required == | == Tools Required == | ||
*Torch | |||
*Welder | |||
== Materials Required == | == Materials Required == | ||
*2 pieces | *2 pieces 48" long - 1/4”x2”x2” tubing | ||
*[[CEB Press/Manufacturing Instructions/Soil Shaker|Soil Shaker]] (this should be pre-assembled, although you can do it assembled, its just heavier and more difficult to manouver.) | |||
*3/4"x1 1/2" bolts (4) | |||
== Diagrams == | == Diagrams == | ||
{{Wanted|fix this to show cut away at top, and bolt locations.}} | |||
<html> | <html> | ||
<iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=a037a5734b1dbb1bb38804396e417a9b&etyp=im&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe> | <iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=a037a5734b1dbb1bb38804396e417a9b&etyp=im&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe> | ||
| Line 16: | Line 19: | ||
== Fabrication Steps == | == Fabrication Steps == | ||
#Torch the necessary areas on the supports. | |||
#*The holes for the hopper mounting need to be 30" away from the bottom side. Mark 30" on the opposite tubing walls and torch 1/2" holes. Insure a 1/2" bolt goes all the way thru. | |||
#*The hole for the grate mount needs only be on one side, make it a slot, about 1 1/4" long, 1/2" wide. Torch away the opposite wall to make it easier to access the bolt. | |||
#Grind away any slag. | |||
#Lay one support on the table, with the grate mount hole touching the table. | |||
[[Image|supportbolts.jpg|thumb|200px|The shaker in place, ready to weld.]] | |||
#Tighten 3/4" bolts with nuts to the [[CEB Press/Manufacturing Instructions/Soil Shaker|Soil Shaker]] so the bolt head is where the hammer will be. | |||
#Prop this up on the leg, so the shaker mounts high enough above the 30" hole that a washer and bolt can be there. | |||
#Tack the bolts in place, remove the nuts and dismount the shaker. | |||
#Protect the threads, and finish welding to the support. | |||
Revision as of 04:17, 27 September 2011
| |||||||||||||||||||||||||
Warning: The documentation for the CEB Press is undergoing a thorough overhaul. CAD models and written directions are presently obsolete. For more information, see Talk:CEB_Press#Documentation_overhaul_in_progress. When the models, specifications and text on this article have been thoroughly reviewed, updated when necessary, and confirmed as whole and accurate, this warning may be removed.
The hopper supports attach to the hopper, and attaches to the main frame via leg holders. They also hold the Soil Shaker
Tools Required
- Torch
- Welder
Materials Required
- 2 pieces 48" long - 1/4”x2”x2” tubing
- Soil Shaker (this should be pre-assembled, although you can do it assembled, its just heavier and more difficult to manouver.)
- 3/4"x1 1/2" bolts (4)
Diagrams
Wanted: fix this to show cut away at top, and bolt locations.
Fabrication Steps
- Torch the necessary areas on the supports.
- The holes for the hopper mounting need to be 30" away from the bottom side. Mark 30" on the opposite tubing walls and torch 1/2" holes. Insure a 1/2" bolt goes all the way thru.
- The hole for the grate mount needs only be on one side, make it a slot, about 1 1/4" long, 1/2" wide. Torch away the opposite wall to make it easier to access the bolt.
- Grind away any slag.
- Lay one support on the table, with the grate mount hole touching the table.
supportbolts.jpg|thumb|200px|The shaker in place, ready to weld.
- Tighten 3/4" bolts with nuts to the Soil Shaker so the bolt head is where the hammer will be.
- Prop this up on the leg, so the shaker mounts high enough above the 30" hole that a washer and bolt can be there.
- Tack the bolts in place, remove the nuts and dismount the shaker.
- Protect the threads, and finish welding to the support.