CEB Press/Manufacturing Instructions/Soil Shaker: Difference between revisions
Jump to navigation
Jump to search
(+warning) |
|||
| Line 10: | Line 10: | ||
== Materials Required == | == Materials Required == | ||
*1 | ===Steel=== | ||
* | *4"x4"x1/2" Angle: | ||
* | **8" Piece: Motor attachment | ||
**21" Piece: Hopper attachment | |||
*1" Rebar: 8.5" (2): Braces | |||
*1" DOM Roundstock: 6.5", shaft | |||
*1"x2" flatbar: 11" | |||
===Other=== | |||
*1"x2"x5" eccentric pillow bearings with locking eccentrics. | |||
*1" to 1" coupler to fit motor | |||
*1/4"x2.5" or 3/8"x2.5" bolt and accompanying nut. | |||
*Hydraulic motor (find specs) | |||
== Diagrams == | == Diagrams == | ||
Revision as of 20:44, 26 September 2011
| |||||||||||||||||||||||||
Warning: The documentation for the CEB Press is undergoing a thorough overhaul. CAD models and written directions are presently obsolete. For more information, see Talk:CEB_Press#Documentation_overhaul_in_progress. When the models, specifications and text on this article have been thoroughly reviewed, updated when necessary, and confirmed as whole and accurate, this warning may be removed.
Tools Required
Materials Required
Steel
- 4"x4"x1/2" Angle:
- 8" Piece: Motor attachment
- 21" Piece: Hopper attachment
- 1" Rebar: 8.5" (2): Braces
- 1" DOM Roundstock: 6.5", shaft
- 1"x2" flatbar: 11"
Other
- 1"x2"x5" eccentric pillow bearings with locking eccentrics.
- 1" to 1" coupler to fit motor
- 1/4"x2.5" or 3/8"x2.5" bolt and accompanying nut.
- Hydraulic motor (find specs)
Diagrams