CEB Press/Manufacturing Instructions/Arms - secondary: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
{{Category=CEB press building instructions}}
{{Category=CEB press building instructions}}
{{Template:CEB Press Manufacturing Instructions Navbox}}
{{Template:CEB Press Manufacturing Instructions Navbox}}
[[Image:Secondaryarms.jpg|400px|The secondary Arms]]
The secondary arms connect the primary arm/frame assembly to the legs to support the structure.
The secondary arms connect the primary arm/frame assembly to the legs to support the structure.


Line 13: Line 14:
*2 pieces 72" long - 4"x6"x3/8" angle steel
*2 pieces 72" long - 4"x6"x3/8" angle steel
*[[CEB Press/Manufacturing Instructions/Leg Holders|Leg Holders]](8)
*[[CEB Press/Manufacturing Instructions/Leg Holders|Leg Holders]](8)
*3/4"x2" bolts (4)
*3/4" nuts (4)


== Diagrams ==
== Diagrams ==
Line 23: Line 22:
see [[Leg Holders]]
see [[Leg Holders]]


<br/>1) Clamp the leg holders in their proper locations and weld them in place. (See diagram,br/>
#Clamp the leg holders in their proper locations (2 at each end, and 2 12" away from the end) and weld them in place.  
)2) Clamp one angle iron arm to each side of the primary arms, the 6" side to the underside of the primary arms, with the 4" side facing outwards from the assembly.  
#Clamp one angle iron arm to each side of the primary arms, the 6" side to the underside of the primary arms, with the 4" side facing outwards from the assembly.  
<br/>3) Torch thru the holes on the primary arms to make two 3/4" holes on each secondary arm.
#Torch thru the holes on the primary arms to make two 3/4" holes on each secondary arm.
<br/>4) Clean up the torch slag with an angle grinder
#Clean up the torch slag with an angle grinder.

Revision as of 00:40, 28 August 2011

Main > Housing and construction > CEB Press > CEB press building instructions

v · d · eCEB Press Manufacturing Instructions
Prepare
Components Fabrication
Structural
Hydraulics
Moving metal parts:
Electronics
Programming
Finish
Paint  · Test

The secondary Arms The secondary arms connect the primary arm/frame assembly to the legs to support the structure.

Tools Required

  • Cutting Torch
  • Angle Grinder
  • Welder

Materials Required

  • 2 pieces 72" long - 4"x6"x3/8" angle steel
  • Leg Holders(8)

Diagrams

Fabrication Steps

see Leg Holders

  1. Clamp the leg holders in their proper locations (2 at each end, and 2 12" away from the end) and weld them in place.
  2. Clamp one angle iron arm to each side of the primary arms, the 6" side to the underside of the primary arms, with the 4" side facing outwards from the assembly.
  3. Torch thru the holes on the primary arms to make two 3/4" holes on each secondary arm.
  4. Clean up the torch slag with an angle grinder.
Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_Press/Manufacturing_Instructions/Arms_-_secondary&oldid=37878"