CEB Press/Manufacturing Instructions/Hopper mounting plate: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
{{Template:CEB Press Manufacturing Instructions Navbox}}
{{Template:CEB Press Manufacturing Instructions Navbox}}
{{Warning|The documentation for the CEB Press is undergoing a thorough overhaul.  CAD models and written directions are presently obsolete.  For more information, see [[Talk:CEB_Press#Documentation_overhaul_in_progress]].  When the models, specifications and text on this article have been thoroughly reviewed, updated when necessary, and confirmed as whole and accurate, this warning may be removed.}}
[[Image:hopper-mounting-plate.jpg|thumb]]
[[Image:hopper-mounting-plate.jpg|thumb]]


Revision as of 05:32, 5 October 2011

v · d · eCEB Press Manufacturing Instructions
Prepare
Components Fabrication
Structural
Hydraulics
Moving metal parts:
Electronics
Programming
Finish
Paint  · Test
Hopper-mounting-plate.jpg


Tools Required

  • Hole punch with 13/16" Die
  • Welder


Materials Required

  • 1/2”x3”x11 1/4” (2)
  • 1/2”x3”x15” (2)

Diagrams

The hole locations, please redo
How to prep the plate for welding

Fabrication Steps

  1. Punch the 13/16" holes in the 15" pieces.
  2. Weld the pieces together, insuring everything is square. And there is a 6" space between the 15" pieces. Skip around so the plate doesnt warp.
  3. Weld both sides, then grind one smooth, so you can install it.
Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_Press/Manufacturing_Instructions/Hopper_mounting_plate&oldid=44490"