CEB Press/Manufacturing Instructions/Arms - secondary: Difference between revisions
Jump to navigation
Jump to search
| Line 20: | Line 20: | ||
<html> | <html> | ||
<iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=4c317c20fdb7bac61211da1f85706ccd&etyp=sw&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe> | <iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=4c317c20fdb7bac61211da1f85706ccd&etyp=sw&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe> | ||
</html> | </html><br/> | ||
[[Image:2ndarmweldover.png| | [[Image:2ndarmweldover.png|800px]] | ||
== Fabrication Steps == | == Fabrication Steps == | ||
Revision as of 00:14, 14 December 2011
Main > Housing and construction > CEB Press > CEB press building instructions
| |||||||||||||||||||||||||
The secondary arms connect the primary arm/frame assembly to the legs to support the structure.
Tools Required
- Cutting Torch
- Angle Grinder
- Welder
Materials Required
- 2 pieces 72" long - 4"x6"x1/2" angle steel
- 1 piece 3"x3"x1/2" steel
- Leg Holders(8)
Diagrams
Fabrication Steps
You will be torching the holes and welding the tab for the secondary cylinder during the final assembly of the machine.
See Leg Holders
- Plase the leg holders in their proper locations (two at each end, and two 12" away from the end) and weld them in place, insuring they are square with the angle iron.
- You may want to weld them so the nut is facing sideways instead of straight out, this way the bolts don't stick out any more from the machine. (They like to catch your clothing as you walk by)
- Put bolts in the outside leg holders on each arm.