Marcin Log: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
(Replaced content with "=2/14/12= *Discussed Projects Director and Executive Director with Aaron Makaruk and Tom Bamford, Tom is doing recruiting for next 3 weeks. =Older Entries=...")
Line 1: Line 1:
=2/14/12=
=2/14/12=
*Discussed [[Projects Director]] and [[Executive Director]] with [[Aaron Makaruk]] and [[Tom Bamford]], Tom is doing recruiting for next 3 weeks.
*Discussed [[Projects Director]] and [[Executive Director]] with [[Aaron Makaruk]] and [[Tom Bamford]], Tom is doing recruiting for next 3 weeks.
=Archive=
=06/17/12=
*Power Cube Wiring again*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//2Jbrbozzq-M" frameborder="0" allowfullscreen></iframe></html>
* step-by-step explanation of PowerCube wiring
* [http://youtu.be/Yg_Veprm8Xk/Up-down of ironworker]
* [http://youtu.be/rLVbZCjYae0/Filing burrs on maun pivot bolt]
* [http://youtu.be/dXtqHA6CM4E/Main pivot hole grinding]
* [http://youtu.be/aAaUbTad--0/Welfare welder lift hooks]
* [http://youtu.be/Gosg3X6_N3U/Upper arm blade mount hole drilling]
=06/16/12=
*Power Cube Wiring again*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//2Jbrbozzq-M" frameborder="0" allowfullscreen></iframe></html>
* step-by-step explanation of PowerCube wiring
*Gabi Day 2*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//5YniLII5n-s" frameborder="0" allowfullscreen></iframe></html>
* Gabi buys an organic cow and works on infrastructure needed including fencing
*Torch Table: first runs*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//PjtjI8KixrY" frameborder="0" allowfullscreen></iframe></html>
* Yoonseo explains the torch table's first run with stepper motors and drivers, issues with stepper motors taking too much current, also explains documentation.
* [http://youtu.be/X4XS02MzCEQ/Unloading LifeTrac]
* [http://youtu.be/RFLXvb4EgT8/Liquid Nitrogen Ice Cream]
* [http://youtu.be/tJGCuZajiHM/Stepper motor controllers]
* [http://youtu.be/E9qxvITaebg/Cracking a frozen penny]
* [http://youtu.be/fmrbvgSk1AI/Cracked a  hotdog]
* [http://youtu.be/rJkeqTbEowU/Aidan Stuccoing]
* [http://youtu.be/rJkeqTbEowU/Aidan Stuccoing]
* [http://youtu.be/Hb7_mMTsTfg/Aidan Stuccoing 2]
* [http://youtu.be/UB2lw-bM08Q/Torch table with Chris DeAngelis]
* [http://youtu.be/UB2lw-bM08Q/Angle blade holder - surface grinding]
* [http://youtu.be/htPlHId31Ws/Grinding angle shear blade]
=06/15/12=
*June 15 Standup*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//7bYseb-WUS4" frameborder="0" allowfullscreen></iframe></html>
* Get tractor shipment out with James Slade, Brianna hatched 4 chicks, finished and testedangle clamp, helped prep shipment and ties up loose ends on ironworker, Gabrielle gets acquainted and makes plans for sweet potatoes, Jose uses ironworker and makes new iron table with Aiden, Chris does calculations on torch table and picks up materials, Aiden learns to change pump on PowerCube and creates a video of LifeTrac load, Darren works on limit switches and documentation for electronics for torch table.
*Ironworker Limit testing*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//66cWndkr0WI" frameborder="0" allowfullscreen></iframe></html>
* Marcin and Brianna discuss testing procedure and force limit with ironworker.
*Shipping CEB Press Pulverizer LifeTrac*
<html><iframe width="560" height="315" src="https://www.youtube.com/embed//EtJOXFkVSVQ" frameborder="0" allowfullscreen></iframe></html>
* Snazzy video of loading LifeTrac for shipping
* [http://youtu.be/wqGGpL6LSG8/more shipping]
* [http://youtu.be/9pZm38v7S6g/shipping product 1]
* [http://youtu.be/rrWtNUMyjmc/shipping product 2]
* [http://youtu.be/9Jtxk8bqs_Q/shipping product 3]
*Gabrielle - Farm Manager - Day 1*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//C24iZrrIvus" frameborder="0" allowfullscreen></iframe></html>
* Gabrielle settles in to Factory E Farm and makes plans to tackle farm growth and make dairy management plan
* [http://youtu.be/HX2e08d_wpc/Torch Table prototype 2]
* [http://youtu.be/fqGuDX_4J8U/James and Argentina Replication]
* [http://youtu.be/8-fvM9eF_rI/Tractor weights]
* [http://youtu.be/Xjv-IAG_V7A/Welding Table Fab]
* [http://youtu.be/Zptp7fq4KQM/Ironworker first real use]
* [http://youtu.be/vDe3ipZfmCE/Mounting tractor weights]
* [http://youtu.be/p6zxUQwM130/Shaker Guards]
* [http://youtu.be/fQxaPDy33rE/Drawer Guards]
* [http://youtu.be/6h2SgxqrEuk/Ironworker 1/4"x4" angle cut]
* [http://youtu.be/7F56lmqhIr4/Torch table jibber jabber]
=06/14/12=
*June 14 Standup*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//66cWndkr0WI" frameborder="0" allowfullscreen></iframe></html>
* James Slade arrives with tractor, figuring out shipping/delivery options, James discusses his visit, Yoonseo interviews, does information sessions and makes simplification to cold saw, Ian continues to film the conclusion to his documentary on OSE, Darren does schematic captures for end stops, Chris continues fabrication of torch table and deals with constraints and updates wiki, Jose makes another new table but still lacks materials, Brianna works on ironworker tables with James and blew out tire on Marcin's truck while picking up matresses, Aaron gets acquainted with Factory E Farm, Aiden learns how to torch and makes plans for welding table,
*June 14 Update, Factor e Farm*
<html><iframe width="560" height="315" src="https://www.youtube.com/embed//zSlAvZbTiSU" frameborder="0" allowfullscreen></iframe></html>
* Update with Marcin and James Slade on LifeTrac progress and reception.
* Marcin updates on Factor E Farm, additional rooms going into HabLab, extreme growth and near self-sufficiency.
=06/13/12=
*June 13 Standup*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//eutFKyujC3I" frameborder="0" allowfullscreen></iframe></html>
* LifeTrac has great reception in Texas, prototypes working well with rigorous testing, the boys discuss LifeTrac successes and issues
* [http://youtu.be/mlvPB2sjt_4/part 2]
=06/12/12=
*June 12 Standup*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//f0XJzp7o3BI" frameborder="0" allowfullscreen></iframe></html>
*Did quality control and documentation for sensor on CEB Press, recruiting info for documentation team, Yoonseo worked on sensor documentation and design rationale for cold saw and dimensional adjustments, Aiden sourced and designed beds for newcomers and gets HabLab ready, Chris works on sketchup software, diagram torch table, continue hydraulic system, Jose make part of torch table,  tractor weights, Brianna continues on ironworker with angle knife and spacing, Darren improves table.
* [http://youtu.be/86om6zWFYN4/Surface Grinding angle shear cover]
* [http://youtu.be/k3nudqMA3O4/Lower Pressure on CEB when testing]
* [http://youtu.be/amzcSkGPX6E/Main And secondary sensors identified]
* [http://youtu.be/Zao3KK8NAe0/Roller guide quality control]
* [http://youtu.be/wINCP-C-g3Y/1x6" flat cut attempt]
* [http://youtu.be/H7VC_iVxEP8/Cut attempt 2]
* [http://youtu.be/POpvXi0KmjI/James Slade with LT 4]
* [http://youtu.be/mWFVZShAhyE/Torch table 2 1]
* [http://youtu.be/_iEuQHyGX0M/Torch table 2 2]
* [http://youtu.be/b3KGaa_BETc/Torch table 2 3]
* [http://youtu.be/mqCpYOg0bFQ/Torch table 2 4]
* [http://youtu.be/YOFHPF-zfuA/Torch table 2 5]
=06/11/12=
*June 11 Standup*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//nd4Wp7b1i4Q" frameborder="0" allowfullscreen></iframe></html>
*Yoonseo simplifies cold saw design, progress on torch table and stepper controllers, Brianna continues with ironworker--completed testing for clamping system--  and shearing, Aiden finishes platform for waste receptacles, removes junk cars and plans to work on CEB checklist and HabLab work, Jose makes second weight, Chris follows up with Swagger, hydraulic system and parts for torch table, Marcin discusses infrastructure issues.
*Surface grinding ironworker angle shear blade*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//sEECERzblsI" frameborder="0" allowfullscreen></iframe></html>
*Brianna explains surface grinding with the ironworker, a how-to and tips
*How to dress the wheel, how to do machining, 
* [http://youtu.be/THEihsXIiQU/Magnets moving by sensor]
* [http://youtu.be/LN470ua0084/Tractor weights + ironworker angle shear]
=06/10/12=
*Documentation Team Recruiting*
<html><iframe width="560" height="315" src="https://www.youtube.com/embed//9oIotrhADD8" frameborder="0" allowfullscreen></iframe></html>
*Documentation slow and painful as the project scales, so we secured funding for multiple full-time documentation workers and team
* [http://youtu.be/cVzyFUqvSZE/How to adjust temperature switch]
=06/09/12=
*Chapati 101*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//msDQPbXd_Mk" frameborder="0" allowfullscreen></iframe></html>
*Chapatti instructions with Marcin
*Liquid Nitrogen Ice Cream Experiment *
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//P1RT2J04OuI" frameborder="0" allowfullscreen></iframe></html>
*Yup, you read right.
* [http://youtu.be/74TPZac247Q/Ironworker shear table]
* [http://youtu.be/6B7LoS8HpL0/Prestucco steps]
* [http://youtu.be/8pK4fnAC6RY/First ironworker cut]
* [http://youtu.be/_RcNhtj5FQQ/Second ironworker cut]
* [http://youtu.be/mdVwbhngaRU/Tractor Weights]
* [http://youtu.be/Ama_RIOOvZg/Blueberry Crop]
* [http://youtu.be/HH-v7NpXbVM/Blueberry 2]
* [http://youtu.be/vYdr5DK9BR4/Carrying metal with Lifetrac IV]
=06/08/12=
*June 8 Standup*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//hhBOWayVHGM" frameborder="0" allowfullscreen></iframe></html>
* [http://youtu.be/f6eBrqR14kY/June 8 Standup 2]
*Well Pump*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//2QCBC4CtlRY" frameborder="0" allowfullscreen></iframe></html>
* Marcin describes well pump
* [http://youtu.be/iTBurXnuMRU/well pump 2]
* [http://youtu.be/buFg9iQMFOs/well pump 3]
* [http://youtu.be/cEqsjo-K6Ho/well pump 4]
* [http://youtu.be/VNUeXkoJlOE/well pump 5]
* [http://youtu.be/ZnBoq3E937Y/well pump 6]
* [http://youtu.be/3r6s6-lb5S0/Septic Fertigation System]
* [http://youtu.be/23h8PYESlPI/Septic Fertigation System 2]
* [http://youtu.be/zLjV9Dte8Ww/Stepper driver test on axis]
=06/07/12=
*Cnc Torch Table End Stops*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//fcYM0O7sU0Y" frameborder="0" allowfullscreen></iframe></html>
*Yoonseo explains design of end stop for CNC torch table
=06/06/12=
*June 6 standup*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//YvQ-xBlasn4" frameborder="0" allowfullscreen></iframe></html>
*Cleaned up scrum board, worked on well and water issues, torch table design revisions, Aiden organizes and updates wiki, Brianna assembled ironworker's hydraulic assembly, Jose organizes recycling center, works on tractor weights, and creates shopping list for rack materials, Yoonseo works on cold saw and stepcontrollers, and does testing.
*Tractor Quick Connect*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//mR1b-qEiEx0" frameborder="0" allowfullscreen></iframe></html>
*Marcin does quality control for QC tractor
* [http://youtu.be/1kH7taW_8CM/Tractor QC 2]
* [http://youtu.be/mWVjMxeNaD4/Tractor QC 3]
* [http://youtu.be/noPAMA_SpTg/Tractor QC 4]
* [http://youtu.be/aSmfXPg5BWg/Tractor QC 5]
*Recruiting - Construction Director - Matt Schwabauer*
<html><iframe width="560" height="315" src="https://www.youtube.com/embed//NNLh5E8QTuc" frameborder="0" allowfullscreen></iframe></html>
* [http://youtu.be/_ZE2ndHpcf8/Stepcontrol]
* [http://youtu.be/Pg89_hmtG_8/Stepcontrol 2]
* [http://youtu.be/9GsFsg7yh_I/Ironworker upper half assembled and moving]
* [http://youtu.be/BzSCfU_PgBU/Hydraulic hose crimper]
* [http://youtu.be/WNlOknxLics/Board of Directors Candidate - Todd Huffman]
=06/05/12=
*Standup June 5*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//mazEQ-cZcIU" frameborder="0" allowfullscreen></iframe></html>
*Marcin updates on his trips, Brianna and Jose update on ironworker progress, Yoonseo discusses shelf build--waiting on more materials and circuit mill progress, Aiden works out video-editing kinks but hopes to post new videos today.
* [http://youtu.be/1noe-pYDpqc/Boring half moons to perfection]
=06/04/12=
*June 4 Scrum*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//_FHReBaRYtw" frameborder="0" allowfullscreen></iframe></html>
*Yoonseo worked on electronic workstation, worked on shelves and worked on implementing new development tactic, Chris does general cleanup and wiki work for torch table, Aiden organized HabLab construction equipment, finished recycling structure design and finished woodpile with water diverion system, Jose fixed a bike, partied, showed the guys a new welding system and built a new table w/ wheels.
* [http://youtu.be/4UqSyd6ngzU/June 4 Scrum part 2]
=06/02/12=
*Well Drilling 101 part 1*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//0m8tIEFaxV0" frameborder="0" allowfullscreen></iframe></html>
*The basics of well drilling: variation, water levels, well info, drill info, etc.
* [http://youtu.be/NE7ZJAQ4zTc/Part 2]
* [http://youtu.be/KHftCzIo_mg/Part 3]
*Drilling perfectly positioned holes ironworker*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//ujERinP1RII" frameborder="0" allowfullscreen></iframe></html>
*Brianna gives advice about how to drill perfectly-positioned holes with ironworker
* [https://www.youtube.com/embed//hH0waRQT3jw/More precise hole drilling ironworker]
*Saturday, June 2, Berlin*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//mIHI6e_IppE" frameborder="0" allowfullscreen></iframe></html>
*Marcin talks about documentation and future plans, and explains lack of documentation as of late
* [http://youtu.be/FQv2ueNWuXI/Shuttleworth Fellows party time]
* [http://youtu.be/B_5Zv06qVN0/Die grinder, putting ironworker blade in place]




Revision as of 13:14, 1 October 2012

2/14/12


Older Entries

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Marcin_Log&oldid=74989"