File:Universal axis carriage side.fcstd
Jump to navigation
Jump to search
Universal_axis_carriage_side.fcstd (file size: 60 KB, MIME type: application/zip)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.
Notes
- Make sure belt hole is about 6.9 mm - that is the correct version to use:
- Use 22:09, 2 November 2019 for printing. Latest file available.
- Use 14:46, 14 June 2017 version for full part design.
- 09:41, 25 February 2017 version should be corrected so the X location of 2 horizontal mid holes is equal to that of the top and bottom row. This allows 4 of 6 magnets to attach mount - lower or higher via 4 magnets rather than via all magnets.
Subparts
Subpart notes: clam has one side that needs to rotate 180 deg.
Ribs - FreeCAD -File:Ribs.fcstd
Ribless - FreeCAD -File:Widnedcarriagebelthole.fcstd
Ribless - FreeCAD -File:Carriageclam.fcstd. Note this file is
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Dimensions | User | Comment | |
---|---|---|---|---|
23:35, 24 December 2018 | (21 KB) | Marcin (talk | contribs) | Simplified carriage sandwich with wide belt hole added. | |
22:46, 24 December 2018 | (13 KB) | Marcin (talk | contribs) | Simplified carriage with rod holes added (10 mm outer holes, not inner) | |
22:44, 22 December 2018 | (6 KB) | Marcin (talk | contribs) | Simplified Carriage positioned for X axis of exruder. | |
19:46, 14 June 2017 | (620 KB) | Marcin (talk | contribs) | Full detail file including DIMENSION DRAWING | |
03:27, 13 June 2017 | (6 KB) | Marcin (talk | contribs) | In correct x axis assembly location. | |
18:00, 12 June 2017 | (6 KB) | Marcin (talk | contribs) | Simplified, no sketch. | |
17:59, 12 June 2017 | (13 KB) | Marcin (talk | contribs) | Simplified, with sketch. | |
09:41, 25 February 2017 | (552 KB) | Polemidis (talk | contribs) | corrected the uneven nut hole size | |
16:05, 18 February 2017 | (571 KB) | Marcin (talk | contribs) | Expanded holes from about .24" to .26" to fit magnets with a little extra space. With .24" version, some magnets had to pe pushed in tight. | |
02:57, 15 February 2017 | (557 KB) | Polemidis (talk | contribs) |
You cannot overwrite this file.
File usage
The following 15 pages use this file: