CEB Press/Manufacturing Instructions/Soil grate

Warning: The documentation for the CEB Press is undergoing a thorough overhaul. CAD models and written directions are presently obsolete. For more information, see Talk:CEB_Press#Documentation_overhaul_in_progress. When the models, specifications and text on this article have been thoroughly reviewed, updated when necessary, and confirmed as whole and accurate, this warning may be removed.

Materials Required

• 1/4”x2”x2” angle, 6' (2)
• 1/4”x2”x2” angle, 3' (2)
• 1/4”x2” bar, 71.5”
• 3/8” rebar, 105'

Diagrams

The grate is 6 by 3 feet (91.4 by 182.9 cm). Made from 33 pieces of half-inch rebar, each three feet in length. These pieces of rebar fit into a frame made of 1/4" angle. There is a one-and-a-half inch between each of the rebars, which means 2 inches from the center of one to the center of the next.