CEB Press/Manufacturing Instructions/Hopper mounting plate

Warning: The documentation for the CEB Press is undergoing a thorough overhaul. CAD models and written directions are presently obsolete. For more information, see Talk:CEB_Press#Documentation_overhaul_in_progress. When the models, specifications and text on this article have been thoroughly reviewed, updated when necessary, and confirmed as whole and accurate, this warning may be removed.

Tools Required

• Hole punch with 13/16" Die
• Welder

Materials Required

• 1/2”x3”x11 1/4” (2)
• 1/2”x3”x15” (2)

Diagrams

Fabrication Steps

How to prep the plate for welding

1. Punch the 13/16" holes in the 15" pieces.
2. Weld the pieces together, insuring everything is square. And there is a 6" space between the 15" pieces. Skip around so the plate doesnt warp.
3. Weld both sides, then grind one smooth, so you can install it.