CEB Press/Manufacturing Instructions/Main Frame Preparation

From Open Source Ecology
< CEB Press‎ | Manufacturing Instructions
Revision as of 16:44, 18 October 2011 by Bkufa (talk | contribs) (Created page with "{{Template:CEB Press Manufacturing Instructions Navbox}} {{Warning|The documentation for the CEB Press is undergoing a thorough overhaul. CAD models and written directions are p...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
v · d · eCEB Press Manufacturing Instructions
Prepare
Components Fabrication
Structural
Hydraulics
Moving metal parts:
Electronics
Programming
Finish
Paint  · Test

Warning.png Warning: The documentation for the CEB Press is undergoing a thorough overhaul. CAD models and written directions are presently obsolete. For more information, see Talk:CEB_Press#Documentation_overhaul_in_progress. When the models, specifications and text on this article have been thoroughly reviewed, updated when necessary, and confirmed as whole and accurate, this warning may be removed.

The following steps can be done in any order before beginning the assembly of the main frame.

Tools Required

  • Welder
  • Torch
  • Punch with 3/4" dies
  • Angle Grinder
  • Big square
  • Speed square

Materials Required

Diagrams

The holes in the horizontal members:
Horizontalholes.png
The holes in the drawer members:
Drawerholes.png

Monsterverticals.gif
Normalverticals.gif
Nutplacement.png

Fabrication Instructions

Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_Press/Manufacturing_Instructions/Main_Frame_Preparation&oldid=45223"