CEB Press/Manufacturing Instructions/Leg Holders

Warning: The documentation for the CEB Press is undergoing a thorough overhaul. CAD models and written directions are presently obsolete. For more information, see Talk:CEB_Press#Documentation_overhaul_in_progress. When the models, specifications and text on this article have been thoroughly reviewed, updated when necessary, and confirmed as whole and accurate, this warning may be removed.

The fabrication steps of the leg holders

You will need 14 of these per machine. They are required for Arms - secondary (8), Feet(4), Frame with main cylinder (2)

Tools Required:

• Torch
• Welder
• Grinder

Materials Required:

• 2 1/2” x 2 1/2" x 3/16" thick square steel tubing – 6” long (1)
• 3/4” nut (1)
• 3/4” x 1.5” bolt (1)

Fabrication Instructions:

1. Torch a 3/4” hole in the center of one of the faces of the tubing; make sure it's large enough for a 3/4” bolt.
2. Weld the nut over the hole, ensuring the nut is level, and the hole is clear. Make sure no spatter goes into the threads by covering the top of the nut.
3. Thread the bolt into the nut.