Latest revision as of 18:17, 5 August 2019

Picture from London, Ontario

Adding a print cooling fan. Use these part libraries

Fan duct for OSE extruder. Download - File:Fanduct.fcstd. STL - File:Fanduct.stl
Fan holder for OSE extruder. Download - File:Fanholder.fcstd. STL - File:Fanholder.stl
Extruder mount carriage. - FreeCAD - File:Extruder mount carriage.fcstd. STL - File:Extruder mount carriage.stl. Note: FreeCAD file - make sure to select addition component so STL is filled in, and not corrupt, when going from FreeCAD to STL. 3D printed parts only - File:3D Printer Extruder.fcstd
8 mm sensor. Download - File:8mmsensor.fcstd
[1] D3D Extruder Holder. File:Motor interface.fcstd , File:Motor interface.stl Issue: when motor gets hot, this gets loose.
File:5015blower.fcstd 5015 Blower
File:Nema17face.fcstd Nema 17 Faceplate sketch
File:Titanaeromarcin.fcstd Marcin's Titan Aero sensor holder. STL - File:Titanaeromarcin.stl.
File:Fanwithholderpattern.fcstd Fan mount for a print cooling fan
Titan Aero with blower. Download in FreeCAD format - [1]
[2] Alleph Objects FreeCAD version of the Titan Aero extruder.See Mirrored_aero_assem.fcstd file. Note this is not what we use, but a mirror image - there are 2 versions of the Titan Aero.
Extruder bottom mount by Polemidis - File:D3D Mini Sub-Assembly Extruder Bottom Mount.fcstd
Extruder bottom mount by Jose Urra - File:X Universal Axis Motor Interface Horizontal Position Motor Bottom Version.FCStd and File:Extruder Holder April 14.FCStd
Extruder bottom holder derivative by Marcin. Download - File:Bottomholder.fcstd

Hint: See build at 3D Printer v18.12

Underslung Extruder Base without fan and shroud - [3]. With fan and shroud - [4]. Ready for printing - [5]
Stock Titan Aero mount bracket. See [6]. Bracket - [7] - STEP + STL. Check out drawings from E3D - [8]. STEP of Bracket - File:Bracket.fcstd
Titan Aero with motor - [9]
Titan Aero mount top plate. File:Brackettop.fcstd.
Simplified carriage: File:Universal axis carriage side.fcstd. (From D3D Part Library)
Sensor holder. Print at 100%. File:Sensholder.fcstd. File:Sensholder.stl.
Lulzbot Mini 2 OSE Mod Fan Shroud. File:Lulzbotmini2shroud.fcstd. Original source file with sketches from Lulzbot- [10]. STL - File:Fanshroud.stl.
Lulzbot Mini 2 Extruder [11].

Underslung Extruder Base without fan and shroud - [12]. With fan and shroud - [13]. Ready for printing - [14]
Stock Titan Aero mount bracket. See [15]. Bracket - [16] - STEP + STL. Check out drawings from E3D - [17]. STEP of Bracket - File:Bracket.fcstd
Titan Aero with motor - [18]
Titan Aero mount top plate. File:Brackettop.fcstd.
Simplified carriage: File:Universal axis carriage side.fcstd. (From D3D Part Library)
Lulzbot Mini 2 OSE Mod Fan Shroud. File:Lulzbotmini2shroud.fcstd. Original source file with sketches from Lulzbot- [19]. STL - File:Fanshroud.stl.

Note: some of these are extruders for 3d printing, and others are extruders for making 3d printer filament.

@@ Line 92: / Line 92: @@
 =Links=
 Note: some of these are extruders for 3d printing, and others are extruders for making 3d printer filament.
+*Filament making - '''[[Open Source Filament Extruders]]'''. Printing - '''[[Open Source Extruders]]'''
+*[[Clay Extruder]]
+*[[Lulzbot Extruder]]
+*[[Thunderhead Filament Extruder]] - not openly collaborative as of 2018
+*[[Extruder Force Requirements]]
+*[[Extruder Troubleshooting]]
+*[[Lyman Filament Extruder]]
 *Simplified Lyman, Precious Plastic, and Recyclebot extruder - OSE Version - [[OSE Extruder]]
 *[[Simple Extruder]]