Revision as of 21:50, 16 September 2020

Development

Open Source Helical Piers
	; Short description
Specifications
Product Ecology	Uses CNC Torch Table to cut the helix. Uses Welder to attach helix to shaft. Cuts shaft with CNC Multimachine. Uses 3D Printing for wire arc additive manufacturing of joints. Uses Hot Dip Galvanizing for final coat (not included in the GVCS). Uses Universal Rotor-based helical pile driver with LifeTrac open source tractor, with Power Cube hydraulic takeoff.
License	OSHWA and OSI compliant. CC-BY-SA-4.0 International, GPLv3, DIN SPEC 3105.
Module 1	Helix is CNC cut with 5 axis CNC torch table to get a leading edge.
Module 2	Shaft is standard 2" pipe, 0.19" wall.
Construction	Connector is WAAM 3D-Printed.
Productivity	Allows for 1 day-builds of entire foundation systems, with 5 minute auger time per pile.
Completion Status
	Design phase as of 9/16/20. See also Status of Completion.
	Do you want more of this? Get Involved
	v · d · e

Development Template
	Description	Link to Work Product	%
	DESIGN
1	Requirements + Value Proposition	Open Source Helical Piers Requirements + Value Proposition	0
2	Industry_Standards	Open Source Helical Piers Industry Standards	0
3	Conceptual Design	Open Source Helical Piers Conceptual Design	0
4	Module Breakdown	Open Source Helical Piers Module Breakdown	0
5	3D CAD	Open Source Helical Piers 3D CAD	0
6	Calculations	Open Source Helical Piers Calculations	0
7	Electronics Design	Open Source Helical Piers Electronics Design	0
8	Wiring and Plumbing	Open Source Helical Piers Wiring and Plumbing	0
9	Software	Open Source Helical Piers Software	0
	BILL OF MATERIALS
10	BOM	Open Source Helical Piers BOM	0
11	vBOM	Open Source Helical Piers vBOM	0
12	CAM Files	Open Source Helical Piers CAM Files	0
13	Cut List	Open Source Helical Piers Cut List	0
	BUILD
14	Build Instructions	Open Source Helical Piers Build Instructions	0
15	Fabrication Drawings	Open Source Helical Piers Fabrication Drawings	0
16	Exploded Part Diagram	Open Source Helical Piers Exploded Part Diagram	0
17	Production Engineering	Open Source Helical Piers Production Engineering	0
	LIFECYCLE DESIGN
18	Build Pictures and Video	Open Source Helical Piers Build Pictures and Video	0
19	Data Collection	Open Source Helical Piers Data Collection	0
20	Future Work	Open Source Helical Piers Future Work	0
21	Troubleshooting and Repair	Open Source Helical Piers Troubleshooting and Repair	0

Steps:

@@ Line 44: / Line 44: @@
 |header10 =
 |label10  =
-|data10   = Describe whether built, prototyped, etc. Link to relevant [[Genealogy]] and [[Status of Completion]].
+|data10   = Design phase as of 9/16/20. See also [[Status of Completion]].