CEB Press/Manufacturing Instructions/Arms - secondary: Difference between revisions
Jump to navigation
Jump to search
| Line 19: | Line 19: | ||
Front Arm | Front Arm | ||
<html> | <html> | ||
<iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=ecda29b3822e184ab38804396e417a9b&etyp=im&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe> | <iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=ecda29b3822e184ab38804396e417a9b&etyp=im&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe> | ||
| Line 24: | Line 25: | ||
Back Arm | Back Arm | ||
<html> | <html> | ||
<iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=bf682d89b179f975b38804396e417a9b&etyp=im&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe> | <iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=bf682d89b179f975b38804396e417a9b&etyp=im&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe> | ||
Revision as of 03:45, 18 September 2011
Main > Housing and construction > CEB Press > CEB press building instructions
| |||||||||||||||||||||||||
The secondary arms connect the primary arm/frame assembly to the legs to support the structure.
Tools Required
- Cutting Torch
- Angle Grinder
- Welder
Materials Required
- 2 pieces 72" long - 4"x6"x3/8" angle steel
- 1 piece 3"x3"x1/2" steel
- Leg Holders(8)
Diagrams
Front Arm
Back Arm
Fabrication Steps
see Leg Holders
- Clamp the leg holders in their proper locations (2 at each end, and 2 12" away from the end) and weld them in place.
- Clamp one angle iron arm to each side of the primary arms, the 6" side to the underside of the primary arms, with the 4" side facing outwards from the assembly.
- Torch thru the holes on the primary arms to make two 3/4" holes on each secondary arm.
- Clean up the torch slag with an angle grinder.