CEB Press/Manufacturing Instructions/Feet: Difference between revisions
Jump to navigation
Jump to search
(+warning) |
|||
Line 1: | Line 1: | ||
{{Template:CEB Press Manufacturing Instructions Navbox}}| | {{Template:CEB Press Manufacturing Instructions Navbox}}| | ||
{{Warning|The documentation for the CEB Press is undergoing a thorough overhaul. CAD models and written directions are presently obsolete. For more information, see [[Talk:CEB_Press#Documentation_overhaul_in_progress]]. When the models, specifications and text on this article have been thoroughly reviewed, updated when necessary, and confirmed as whole and accurate, this warning may be removed.}} | |||
You will need 4 of these per machine. Each one requires: | You will need 4 of these per machine. Each one requires: |
Revision as of 01:35, 24 September 2011
|
|
Warning: The documentation for the CEB Press is undergoing a thorough overhaul. CAD models and written directions are presently obsolete. For more information, see Talk:CEB_Press#Documentation_overhaul_in_progress. When the models, specifications and text on this article have been thoroughly reviewed, updated when necessary, and confirmed as whole and accurate, this warning may be removed.
You will need 4 of these per machine. Each one requires:
Tools Required
- Welder
Materials Required
- Leg Holder (1)
- 1/4” plate, 8”x8” (1)
Diagrams
Fabrication Steps
1) Center the leg holder on the plate, ensuring it is square in all directions.
2) Weld it 100% to the plate.