CEB Press/Manufacturing Instructions/Feet: Difference between revisions
Jump to navigation
Jump to search
(+warning) |
|||
Line 9: | Line 9: | ||
== Materials Required == | == Materials Required == | ||
*[[Leg Holder]] (1) | *[[CEB_Press/Manufacturing_Instructions/Leg_Holders|Leg Holder]] (1) | ||
*1/4” plate, 8”x8” (1) | *1/4” plate, 8”x8” (1) | ||
Revision as of 18:59, 3 October 2011
|
|
Warning: The documentation for the CEB Press is undergoing a thorough overhaul. CAD models and written directions are presently obsolete. For more information, see Talk:CEB_Press#Documentation_overhaul_in_progress. When the models, specifications and text on this article have been thoroughly reviewed, updated when necessary, and confirmed as whole and accurate, this warning may be removed.
You will need 4 of these per machine. Each one requires:
Tools Required
- Welder
Materials Required
- Leg Holder (1)
- 1/4” plate, 8”x8” (1)
Diagrams
Fabrication Steps
1) Center the leg holder on the plate, ensuring it is square in all directions.
2) Weld it 100% to the plate.