CEB Press/Manufacturing Instructions/Feet

|

Warning: The documentation for the CEB Press is undergoing a thorough overhaul. CAD models and written directions are presently obsolete. For more information, see Talk:CEB_Press#Documentation_overhaul_in_progress. When the models, specifications and text on this article have been thoroughly reviewed, updated when necessary, and confirmed as whole and accurate, this warning may be removed.

You will need 4 of these per machine. Each one requires:

Tools Required

• Welder

Materials Required

• Leg Holder (1)
• 1/4” plate, 8”x8” (1)

Fabrication Steps

1) Center the leg holder on the plate, ensuring it is square in all directions.
2) Weld it 100% to the plate.