D3D Part Library
3D Printer Part Library
Hint: Newest part library is at D3D v19.06
D3D frame 16": File:D3D frame assembled 16 inch.FCStd Note: 2" width of metal. Should be updated to 1.5" width. (4/16)
[10] Motor Side of Axis - 221k - FreeCAD -File:Universal axis motor side.fcstd. STL - File:Universal axis motor side.stl
[10] Carriage Side - 552k - FreeCAD - File:Universal axis carriage side.fcstd. STL - File:Universal axis carriage side.stl
[10] Short Idler Side - 75k - FreeCAD - File:Universal Axis Idler Side short version.fcstd. STL - File:Universal Axis Idler Side short version.stl.
[10] Belt Holding Peg - FreeCAD original size - File:Peg 8mm rods.fcstd. STL at 85% size, works well - File:Peg 8mm rods.stl
[2] beginning + [1] end piece + [12] springs of Cable Chain - 4 STLs in a zip file - File:D3dcablechain.zip.
[44] Cable Chain Main Link - need 44 of these for D3D 16". File:Link.fcstd. STL - File:Link.stl
- Beginning Cable Piece - File:D3dcablechain beginning.stl.
- End Cable Piece - File:D3dcablechain end.fcstd. File:D3dcablechain end.stl.
Endstop holder. - File:Endstopholder2.fcstd. File:Endstopholder2.stl. See Open Source Endstop Holder
Fan holder for OSE extruder. Download - File:Fanholder.fcstd. STL - File:Fanholder.stl
File:Titanaeromarcin.fcstd Marcin's Titan Aero sensor holder. STL - File:Titanaeromarcin.stl.
Spool Holder. File: File:Spoolholder.stl Link for more types of these joints - [1]
- Other:
- Idlerlong.jpg[0] Long Idler Side - 96k - FreeCAD - File:Universal axis idler side.fcstd. STL - File:Universal Axis Idler Side long.stl.
Endstop. - FreeCAD - File:D3D End Stop Switch.fcstd
- D3dframe freecad.jpg
Frame - FreeCAD -File:D3dframe.fcstd. STL - not 3d printer. Another version will be 3D printed.
Right Y Axis - FreeCAD - File:D3D Right Y Axis.fcstd.
'M6x18 Axis Hex Bolt - FreeCAD - File:M6x18.fcstd. Marcin plz confirm
M6x30 Axis Hex Bolt - FreeCAD - File:M6x30.fcstd. 30 mm version connecting X axis to Y axis. EDITED after Marcin's confirmation
Axis Hex Nut - FreeCAD - File:Axis hex nut freecad.fcstd.
Magnet - FreeCAD - File:Neodymium magnet freecad.fcstd. Magnet updated to 12mm×3mm
Flanged Bearing - goes on the idler 3D printed piece. FreeCAD - File:Pulley.fcstd.
- -----------------------------------------------------------------------------
- Extender.jpgFlanged Bearing - goes on the idler 3D printed piece. FreeCAD - File:Pulley.fcstd.
Carriage Linear Bearing - FreeCAD - File:Carriage linear bearing freecad.fcstd File:D3D Linear Plastic Bearing.stl - printable version?
Nema 17 Stepper Motor - FreeCAD - File:Nema 17 stepper motor freecad.fcstd.
X Axis Belt - FreeCAD - File:8mm belt x axis freecad.fcstd. Belt needs to be 6 mm wide, 2mm pitch (GT2 belt)
- Previewfilename.jpg
Part name - FreeCAD - File:Freecadfilename.fcstd.
GT2 Pulley Freecad - File:GT2 pulley.fcstd.
3D Printed Pulley + 3D Printed LinearBearing These are not the same as the files above. FreeCAD - File:3dppulley.stl. File:3dlinbearing.stl
Deprecated
[2] Endstop Holder. Used prior to D3D v19.02 File:D3D End stop interface.fcstd ½ cube bumps, File:D3D End stop interface.stl.
[1] D3D Extruder Holder. File:Motor interface.fcstd , File:Motor interface.stl. Notes: used prior to Prusa i3 mk2 extruder and Titan Aero.
Sensor Holder. - Generated in BlocksCAD. STL - File:Sensholder.stl File:D3D Extruder Z Sensor Holder.fcstd
Introduction
Conditions of satisfaction for complete CAD for a given project means that we have a complete part library:
- Parts - for building Modules, for producing Fabrication Drawings
- Modules - Made of multiple parts, these are sub-assemblies of the Final Assemlby. These are used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
- Final Assembly - The completed build. for Exploded Part Animations, LAIs. Note that the Final Assembly may have to use Simplified Assets in some cases to remain workable
- Simplified Assets: Parts, Modules, Assemblies - these are versions with details removed. Some may be grouped to facilitate handling. In some cases they are drawn from scratch as only abstract, blocky models - to save significantly on file size.
- File Size Requirements - all assets meet File Size Requirements for that particular asset type. Files can't be so large that FreeCAD can't open them or work with them effectively.
- File Organization - Spreadsheet of all Assets (both Simlified and Complete assets) is available
- Construction Best Practices - procedures for effective part building in FreeCAD are followed for each file.
- File Build Documentation - Each file is documented for how to create that file, so novices can get up to speed in making modifications. A short video with voiceover is the best way to document a part build. This is important because this creates design literacy in the general populace.
5/16" or 8 mm Rod Version
D3D 16" Version
Hint: Once all the parts here are stable, we will create a FreeCAD D3D Workbench which includes a drag-and-drop of every part within FreeCAD
Part Index
See D3D Integration, Emmanouil Log, Jose Log, Cedric Log for all the source files, and D3D_Instructional_videos_for_April,_29th,2017_Workshop for exploded part animations, and D3D Language Agnostic Instructionals for further documentation.
Index:
Small version for small machines such as 3D printer, small laser cutter, and CNC circuit mill
Assembly Index
Simplified Modules - For Use in Modeling
TODO: ADD SHORT IDLER VERSIONS OF EACH
Single x axis: File:D3D Circuit Mill X Axis.fcstd
Single y axis: File:D3D Circuit Mill Y Axis.fcstd
Single z axis: File:D3D Circuit Mill Z Axis.fcstd
Simplified carriage: File:Universal axis carriage side.fcstd. (This one is in the spreadsheet above)
D3D 13"
File:Downholder.stl. File:Downholder.fcstd.
Subparts
20 Tooth Timing Pulley - FreeCAD - File:20 tooth pulley freecad.fcstd. This is an extruder driver gear, not 20 tooth pulley. See D3D BOM 2 Week BOM for the correct part.
Extruder
See D3D Extruder
D3D Mini
Top extruder Mount - FreeCAD - File:D3D Mini Sub-Assembly Extruder Top Mount.fcstd. STL - File:Miniexthold.stl
Deprecated
Motor Side, short - File:Universal Axis Motor Side short version.fcstd.
Idler Side Axis Full Size - FreeCAD - File:Idler side printed axis half freecad.fcstd. STL - File:Idler side printed axis half freecad.stl.This probably needs to be converted to the file from Manolis Log with a version history?
Frame Extender - FreeCAD by Emmanouil Log - File:D3D Axis Extension.fcstd. STL - File:D3D Axis Extension.stl . Extender does not work well, as it is difficult to make it parallel to frame side.
Bigger Pictures
