Jessica Log

From Open Source Ecology
(Redirected from JL2)
Jump to: navigation, search



week 05/26/2021 !!!!

Slack and Discord still not opensource

Element?

https://wiki.opensourceecology.org/wiki/Seed_Home_v2 https://wiki.opensourceecology.org/wiki/Wall_Module_Design

Keys:

1. Experiment in collaborative edit. Working doc, each person communicates on it. Just use existing one at the end.

2. Template for wall modules is this for Module 1 onwards, and these are wall modules 1-69.

3. FreeCAD - upload to Library.

4. Translate SweetHome to FreeCAD.

5. Embed working Google Slides in wiki. That's just a Google It thing.

6. Keep work on your log, keep hours

https://drive.google.com/drive/folders/180KINsLnK6vUlcnhCgAyzDThc-vlaV1G

https://drive.google.com/drive/folders/1HVRWojNU5XMcpkjPzYO5uOg_ALT5GHt-

https://sourceforge.net/projects/sweethome3d/files/latest/download

ungroup

painfully limited software capacity... the beauty is in the coherent training... rest will come

Lumber Dimensions... Nominal Actual Actual - Metric 2" x 6" 1-1/2" x 5-1/2" 38 x 140 mm 2" x 8" 1-1/2" x 7-1/4" 38 x 184 mm 2" x 10" 1-1/2" x 9-1/4" 38 x 235 mm 2" x 12" 1-1/2" x 11-1/4" 38 x 286 mm

listening when you start talking about the tool panel

https://wiki.opensourceecology.org/wiki/Aquaponic_Greenhouse

https://wiki.opensourceecology.org/wiki/FreeCAD_Badge#2020

week 11/11

volunteered for OSE Instagram page radio silence... OSE Linux 2.0 Beta onto a usb: used this [1] planning to run this on this same desktop but reading this [[[[[2]]]]] will load to pilot tablet

week Friday Sept 4

https://wiki.opensourceecology.org/wiki/Seed_Home_v2

https://wiki.opensourceecology.org/wiki/Seed_Home_v2_Conceptual_Design#Wall_Interface

https://docs.google.com/presentation/d/1zKOMjNU4qP_xndJ1r5LLmJLNujjfy8LPEyflKgELZWM/edit#slide=id.g94d7740fa0_2_0

https://drive.google.com/drive/folders/1sS_iHKuStYd4wtWcnR_DVz3xq7qNc5jz

Parai Nilam, Sri Lanka https://risd.zoom.us/rec/share/zJZqF-rC6V1JUonRwxmFX5MCJ7n4T6a8gSEerqUKmk5wTLHP72EAXQzdzwYnKmBa

Passcode: @0p&WJ%a

https://drive.google.com/file/d/1ZEeEVK76eTIJLrzEGSRoiyBF1fhYXCXI/view?usp=drive_web

week Friday June 12

NASA Ventilator hood open source???? [3]

Update from Simon Schafer, of the spaceship company:

Domestically all the medical equipment development and information release efforts have come to a standstill within the company until the FDA approves the equipment designs. Even the negative pressure canopies were deemed to need FDA approval. It’s been a few weeks since NASA submitted the CPAP hood designs under the Emergency Use Authorization (EUA) categorization. The team has answered several rounds of technical questions from the FDA concerning that submission thus far.

After a request from Richard Branson and some discussions there was an announcement that a company within South Africa was going to produce CPAP hoods based on our designs. I was not privy to final details surrounding that but last I heard they too wanted to wait until the FDA approved the design.

3 new American companies have come out with CPAP hood designs but they too are waiting for EUA approval to distribute on more than a testing basis https://www.helmetbasedventilation.com/


Review Notes for Plotter Pen/Drill:

Print plotter pen and clamp from existing .stl, download and open in cura

Drill pen and sensor: [[4]]

1 File:Plotterpen.fcstd

[[5]]

[[6]]

[[ile:Penholderclamp.stl]

In CURA review basic and advanced settings see... Check advanced settings for 1.2 nozzle, update profile if necessary

Steps per mm at 100

Layer check/ missing/ change thickness to 1.0 top, check'expert config' settings no check on spiral contour bottom and top if already set to 1 in Basic and missing

Filament size using 2.85

Check machine settings bed size (does not update with profile update)

save /export Gcode to SD card

note: .stl is the geometry of object, the Gcode depends on the above settings for the printer to read and print

2 Using Inkscape to Generate Gcode

from Image Started with .png, save as .svg, at top bar path/ trace bitmap under multiple scans: creates a group, select colors, smooth, and stack scans was set to 8, could likely reduce to 2, select ok then move one off.

Pathtrace.jpg

There will be multiple additional copies to delete

Vectordel.jpeg


export gcode

Sticker gcode.png

this is the link to check the Gcode before plotting as above

[[7]]


And here are the files including the un-plotted Gcode file for the OSE sticker (no added lines to 90 for alignment)

File:OESd4dStickpath4.zip

Inkscape w/ save as .gcode

In order to get the OSE Linux platform software Inkscape to be able to save as .gcode, from the location you put the download of gcode for Inkscape [8] you open the terminal. Your do this by clicking the >_ box icon home symbol ~ then / the location. You see mine was located at ~/Desktop/MARCH STEAM/pen plotter. then type the comand sudo cp -rv name of the directory to transfer, here it is 'gcodeplot-master' it is the start of directory and all the contents so /* to the location that Inkscape will access it, which on my system is 'usr/share/inkscape/extensions/' Screenshot from 2020-03-16 19-47-10.png

week Friday May 1

Andreas 15:25 https://docs.google.com/spreadsheets/d/15bghb3UQQTetCKa9aMjmpemYfJbQqIC7qEEJE4blLgU/edit#gid=1986482026

https://vention.io/

Guenter: precious plastic Media:https://preciousplastic.com/ Guenter 15:52 https://bazar.preciousplastic.com/plastichub/ https://bazar.preciousplastic.com/plastichub/ https://github.com/plastic-hub/products/blob/master/products/asterix/index.markdown


week Friday April 24

team call

Andreas 15:18 https://docs.google.com/presentation/d/15CTIVouRlnb68u6GcBY4_dGShRbEgDvIjYtjSMJjQv4/edit#slide=id.g52e51dda25_0_11 https://docs.google.com/presentation/d/1QWVfOiyfs7DVeMVIQfUG4A1PnkrzKOP6xjLcJTZ0q7I/edit#slide=id.g74d3fa31a2_0_5

marcin 15:19 https://wiki.opensourceecology.org/wiki/April_2020 https://wiki.opensourceecology.org/wiki/Development_Team_Log#2020 https://wiki.opensourceecology.org/wiki/Zachman_Ontology


RaspPi Tablet [9] Set up to teach kids coding... OS comes with Minecraft PI and various python (scratch etc.) coding programs[10]

Friday April 17

marcin https://wiki.opensourceecology.org/wiki/Depth_of_Modularity https://wiki.opensourceecology.org/wiki/Collaboration_Architecture_Log ttps://wiki.opensourceecology.org/wiki/OSE_Schedule


https://docs.google.com/presentation/d/1ZKXZRl5IxkaKiBZthe8fY3nCpbEHTlunA-GYu60WxtQ/edit#slide=id.g7457983536_1_0

https://www.globalwitness.org/en/

OSE response- biofules integrated agriculture

Tuesday April 14

Virgin Galactic, The Space Ship Company TSC + NASA on Covid with OSE [[11]]

Texas helmet production, can we get this open source George? [12]

Fri April 10

OSE team call Wiki Taxonomy / Versioning Genealogy

Marcin https://wiki.opensourceecology.org/wiki/Lyman_Filament_Extruder https://wiki.opensourceecology.org/wiki/Plastic_Gears_are_the_Future https://wiki.opensourceecology.org/wiki/STEAM_Camp_9_Day_Curriculum https://wiki.opensourceecology.org/wiki/Teaching_Module_Requirements_for_STEAM_Camps

Andreas https://docs.google.com/presentation/d/1QWVfOiyfs7DVeMVIQfUG4A1PnkrzKOP6xjLcJTZ0q7I/edit#slide=id.p https://docs.google.com/presentation/d/1QWVfOiyfs7DVeMVIQfUG4A1PnkrzKOP6xjLcJTZ0q7I/edit#slide=id.p

https://docs.google.com/spreadsheets/d/15bghb3UQQTetCKa9aMjmpemYfJbQqIC7qEEJE4blLgU/edit#gid=0

https://docs.google.com/drawings/d/1URLgANKX610eE0frcohkUMTY1rTwrLwnzx48XyoCc7s/edit

https://wiki.opensourceecology.org/wiki/Template:Lesson

Fri April 3- Mon April 6

<ask as an effort in collaborative design: simultaneity/ single project development/ local material sources and distribution.... issue of locale. Homebound supply chain. Only filter material available through Amazon monopoly are vacuum bags and furnace filters. [13] The drowning of doctors in Hospitals. Ugh lungs are the grief organ wtf. Breathing is so crucial

Product is that we take them back/ people keep them and they are part of the shredder extruder STEAM CAMP

Catalyze Boston as opposed to near a manufacturing culture... Boston is a lifestyle in manufacturing the super tech of proprietary entrepreneurship.

Making the 'microfactory' work anywhere... Summer Great lakes GOSH discussions [14]

Call Notes: https://wiki.opensourceecology.org/wiki/Andreas_Log

Free Cad 3d Printer work bench https://wiki.opensourceecology.org/wiki/G_Roques_Log

What to do with all the failed attempts to protect our medical people, loved ones, all people, and selves? Try again. Do Better.

https://www.thingiverse.com/thing:1468596 https://www.thingiverse.com/thing:1468596

Filament sensor GOSH Global Circular Plastic Consortium [15]

And Matt Rogge, works @ Tech4Trade[16] from Seattle, Washington PET Thunderhead filament extruder[17]

Fri March 27- Monday March 30

Open Source N95 Face Mask[[18]]

Covid respirator mask seal:

Supplies TPU 2.85 filament:


TPU SEAL study based on MontanaMask [19]

File:MontanaMaskSEAL.stl [20]

Made test print versions of both the Billings MontanaMask and the SEAL study .stl files Does look like they will fit on the 150 cube bed! The SEAL is offset 2.85 mm from the surface of the MoontanaMask- this distance may need to be adjusted depending on material behavior. Wonder about the g-code setting 'spiralize contours' for this [21]

MontanaMaskSEAL.png

Tues March 24

April STEAM Camp: Development template for Shredder + Filament Free Online Sign in/ parts on own - Money for kit of parts

regenerative eco services air/water/soil quality + https://www.emotibit.com/

Marcin on Collaborative Literacy https://www.youtube.com/watch?v=D9jSo-p0bQM&list=TLPQMjQwMzIwMjBRTxFJOWdKxw&index=1

Search Flashy XM https://docs.google.com/drawings/d/1lp3fTsiTzLC-xO4m9EaBOvXCJwGIo9Zt9vi0tYAw2S4/edit?pli=1

OSE Collab https://wiki.opensourceecology.org/wiki/OSE_Collaboration_Protocol

Template https://wiki.opensourceecology.org/wiki/Development_Spreadsheet_Template

Genealogies https://wiki.opensourceecology.org/wiki/Genealogies

Wiki_Taxonomy https://wiki.opensourceecology.org/wiki/Wiki_Taxonomy

Fri March 13 - Tues March 17 STEAM Camp

Introduced to Nano sudo commands to get Inkscape to save .gcode [22]

truncate FILEHANDLE, LENGTH what software would you use to reduce file size on .png images? File:Screenshot from 2020-03-14 16-20-24.pngFile:Screenshot from 2020-03-14 16-21-08.pngFile:Screenshot from 2020-03-14 20-57-57.pngFile:Screenshot from 2020-03-14 21-08-01.png

Printing mask components...https://www.thingiverse.com/thing:4194067

need the pi keyboard...love my paper box, able to modify and add fans and camera still!!!

Tues March 10 - Fri March 13

Trouble shoot heating block/ print mill mount w pen and sensor

Plotting file generation lesson 1 hr meh

Outhouse drawing

extend + support bed

Fri March 6 2020

Comments @ community: Many institutions/ tech schools & youth clubs with the need/interest also need funding to be in place with proposal

Partnerships in skill building to pursue grants... time

MIT Harvard Fliers- Marcin is published there [[23]], another way?

12 school categories: industrial design (product development)

5 legged dogs: Agree is random how these surface and tend to be people already working in os with skills to add but little interest in or means to pay to participate...need strong alignment in production goals

Partnership to solve problem - design competitions

OSE on location!

Global organization vs site specific issue/local need

Mon March 2 2020

Instructor Free Cad Exam with complex object. I did the assignment wrong before i even started lol [24]

Screenshot from 2020-03-02 13-43-29.png

Free cad part is 2 MB File:Gua sha 1place.fcstd

Not file type for part libraryFile:Gua sha3.gcode

Sat Feb 29 2020

Rasp Pi tablet and Highland Park Community Meeting conflicts. Week days better for both!

Chris, I want to print this! [25]

Stylus: [26]

Fri Feb 28 2020

Call: find contacts at Tech schools and career Councillors

Click funnels (?)

Targeted campaigns on google and face book with keywords

'STEAM Camp' wrong title for Post Secondary marketing? 'open source design thinking' 'Microfactory'

Thurs Feb 27 2020

MIT fliers posted qty 20

Tues Feb 25 2020

Participant Outreach: Fliers posted Harvard square campus, Science Bldg, and GSD qty 20

Torit Montessori Community contact Kristen M.

Youth Build Boston, Ken Smith and Miguel Chavez [27]


Mon Feb 10- Mon Feb 24 2020

After March 9th Sign-Up Deadline

plan follow up post related to 'come check it out message' and document sharing request.

Pitch April 24- microfactory STEAM Camp goes to Mars; George and Loretta @ Virgin Galactic

Seed Home swarm build nomadic structures in Matammoros, Borderlands... plastic extraction and recycle from site


5 legged dog search:

Jonathan K to join in March, Boston?

Shannon Hicks, OS mayfly data sensor and logger future event

Contact DEEP Lab, collaborative group, founder Addie Wagenknecht [28]

RISD colleague, Elizabeth Dean Hermann, Ph.D shared link with students

Wentworth Institute Technology colleague, NJ Unaka shared with students

Sung Ho Kim, professor of architecture, Washington University in St. Louis/ Axi:Ome llc, design director, www.axi-ome.net

Marcin on the 5 legged Dog [29] Comments, like this; in intro need to down play '5 legged dog' name, focus on rare breed and use the name to more loudly "state five legs". at end 'Let's normalize collaborative design! and state more believably that it will be fun... solid background

Participant Outreach:

Contact 'Innovative Housing Technology' at Roxbury Community College- posted flier

Contact Oneida tribe...

NADAAA marketing email blurb Ian edit- Facebook?

BAC requested an 'education rate' for two participants, gave a walk through on the cost. I don't think it can come down but said two can participate for the prices with one set of materials- need to outline captive audience rates and share proposal/expectation for participation- so slow and ongoing un-supportive annoying hello academia

GOSH (Global Open Science Hardware) forum invite posted... love this group amazing open source science hardware work and support for projects, is where I heard about OSE. [30] posts from forum discussions [31][[32]] Join!

Fliers printed to post in Cambridge


Audience Specific Marketing-

Marcin/ Microfactory / Technology- Building Systems  / Products+ Skills - D3D, circuit, rasppi tablet + fabrication, collab design (constraints, modularity, opensource), cadcam, electornics, programming

https://www.youtube.com/watch?v=iGEFdKVm3uU / summer X/ power cube youtube / simple graphic showing where each can lead

'collab design' challenge- macroeconomics/ one of the mistakes may be the difference between school 'team projects' and DIT

Friday & Wednesday Organization Call

Sat Feb 8, 2020

Ω

you tube is my friend

NADLAD space confirmed

Fri Feb 7, 2020

test print not running properly. trouble shoot

Team Call March STEAM Camp date shift to 14-17

Boston Architecture College interested in a 2 day weekend option


OSE Exam... Instructor Exam

Thurs Feb 6, 2020

video trial on file/clip sizes

Wens Feb 5, 2020

Linux lessons

why the phonetics of this word aren't enough (lin ex), one must use sudo nano to communicate with it. Sudo stands for super user do which gives users the permission to use commands at the most powerful root level of the system. Nano is the text editor, installed by default on Ubuntu, Nano is an ncurses-based editor (which means it must be run from a terminal window) that requires code reference unless you are experienced. Googling will absolutely work once you are familiar with what you are looking for. If you are running the OSE linux platform on a thumbdrive consult others @ making and saving modifications. This link was great with the basics of linux code language [33] You can verify the presence of nano by typing nano --version in front the terminal promt yourname@yourcomputer:~$ Screenshot from 2020-03-17 14-35-13.png

like any language, one must learn the swear words first like sudo cp -rv /* , where cp means copy recursively -rv, meaning including all sub folders, forward slash / is the beginning of an absolute full path to the asterisk * which in terminal means everything (code 42)... the detail is in the space /* which is literally the entire root directory of the operating system rather than a particular foldername/* meaning entire contents of that specific folder to a location. So don't blank space, forward slash, asterisk anything unless you want to sudo rm -rf remove all unwanted copies of root directories by using the up arrow to repeat the command many time.

Moral of the story, be careful with (backslash asterix!!!!)

There is no place like (approx symbol)


Inkscape w/ save as .gcode

In order to get the OSE Linux platform software Inkscape to be able to save as .gcode, from the location you put the download of gcode for Inkscape [34] you open the terminal. Your do this by clicking the >_ box icon home symbol ~ then / the location. You see mine was located at ~/Desktop/MARCH STEAM/pen plotter. then type the comand sudo cp -rv name of the directory to transfer, here it is 'gcodeplot-master' it is the start of directory and all the contents so /* to the location that Inkscape will access it, which on my system is 'usr/share/inkscape/extensions/' Screenshot from 2020-03-16 19-47-10.png


VIDEO

Summary across platforms [[35]] Linux OS rec [[36]] Still just playback! Cheese already installed! works perfectly Video of re-assembly *OS Video Edit [37] Change setting on an appimage: rt click/ properties/ allow to run/ then dbl click[38] Drag camera video's from location stored via CHEESE to upper left then top time line/ Right click each clip and change speed x16- freezes in play back @ 45-55 seconds.- export/ video only- continuous crashing at 34% video export. Tried a variety of settings. most able to export... Assemble D3D on youtube [[39]] Video Only Target: mp4 (h.264) Video profile: HD 720p 30 fps (1280x720) Quality: med Freezing at 68.2%

axis working/ direction? y reverse? / Z axis sensor not lighting up - fixed

FREECAD

Chris Sketcher Tutorial PDF [[40]]. I can vouch its good for those with advanced modeling software experience. Interesting to have to have all constraints! Definitely not a design tool in the generative form sense but makes parameters extremely clear!

OSE Linux Microfactory WORKFLOW

Comes loaded with KiCAD. Vectors like illustrator w/be ideal

Merge Workflow on youtube [[41]]

block plugs for Raspi and touchscreen to parts library File:Xxx

Case study with hand grips

Loft13closed.png part/loft/sk1 + sk3/closed Loft13ruled.pngpart/loft/sk1 + sk3/ruledLoft13solid.pngpart/loft/sk1 + sk3/solid

Loft sk1-3 ruled.pngpart/loft/sk1 +sk2 +sk3/ruled/closed Partloftsk1-3solid.png part/loft/sk1 +sk2 +sk3/solid


File:Xxx

Tues Feb 4, 2020

Downloaded and scaled RsPs primitive

File:PiTabPrimscale2.fcstd

Loaded config study file to parts library. This is not really clean enough to be a 'part' but maybe useful toward the case configuration for others. Getting familiar with what and how on the whole OSE Linux platform

Conversation

  • NADLAB - architecture firms basement

NADLAB.jpg

  • NADAAA 1920 Washington St, Boston, MA 02118
  • Price structure - Printer
  • Marketing - Boston SA - society of architecture; BAC - Boston Arch College - school wide - RISD - went to grad school in Landscape, they will put it up. Community - funding for putting students through this.
  • Flyer - put it up places as well, in coffee shops.
  • Friends savvy in marketing -
  • Target Market
  • Finances on event by Friday
  • Bio -

Jessica Leete is a designer, a licensed landscape architect, sculptor, urbanist, community catalyst and ecology educator. She is the founder of Boston dot dash Studio. The studio is the space for convergent thinking, design process, and construction regarding land and the systems that engage it to create regenerative solutions that reverse environmental degradation, are resilient, adaptable, and (through an engaged design process) provide training for an empowered community. The studio is about realizing solutions, the act of making, and how the process of design can affect positive change. The first of many, she encourages you to join the movement, start your own (location) dot dash Studio. A member of the Global Open Source Hardware (GOSH) movement, her particular interest lies in developing and making ubiquitous, open source hardware and technology for environmental metrics. To that end, she is collaborating with Open Source Ecology to enable universal access to collaborative design using open source toolchains.

Mon Feb 3, 2020

Ubuntu desktop config on xxxx machine


Lunar Imbolc Sun Feb 2, 2020

Review Marcin OSE STEAM Jan Day 9-

MKT (7).jpg MKT (1).jpg Hmm I seem to be into the object

Market research while looking for computer cables

MKT (5).jpg MKT (4).jpg MKT (3).jpg MKT (2).jpg MKT (6).jpg

Wonder about micro disk speed question/ point made by Don this am... $19.11 vs $51.98 both 64 GB but one has 170MB/s read speed and the other upto 130 MB/s is it possible this overpriced chip would be worth the investment???

Mico price.jpg

[[42]] After powering on your computer, but before your normal operating system starts, you can access your boot settings. Boot target computer from USB Stick First, configure the BIOS to prioritize booting from a USB drive. In my case, I'm installing on an unknown desktop running Windows 7. Power up xxxxx Press `Space bar`and Del to enter the BIOS UEIF F8 to enter Boot Setup Drag flash to top of boot order Ubuntu opens, Followed install (as superuser) order alongside windows 7, select drive: SCS15 (0,0,0)(sda)-500.1GB ATA Samsung SSD 850 Allocate drive space by dragging divider. I set: windows 7 /dev/sda1 (ntfs) at 180.9 GB and Ubuntu /dev/sda2 (exct4) at 319.2 GB

Some warnings

[[File:Example.jpg|100px]

Select Continue

12 minutes then resize operation failure

Going for erase and install Ubuntu Failed/img/ sent error to developers/ account / verify email restart moving through sign in stuck on 'Who are you?' page finally let me continue... was not clear that it was still asking for a computer name 50 minutes later, installation complete restart remove installation medium and hit enter

OMG finally

Ubuntu Desktop!

did not do this: 'Disable 3D Graphic Acceleration'

Sat Feb 1, 2020

Back to OSE Linux setup on different machine! Missing screen cords

listened Day 8 am Utube recording

drawing different plugs for Raspi and touchscreen- tech naming conventions?

Fri Jan 31, 2020

From Boston! Confirmed one location option for March 2020 Open Source Microfactory STEAM Camp: NADAA architecture office ground floor shop/ Harry Lowd@ [[43]]

Unpack and reassemble D3d

Lugg.jpg

She needs more attention but has a name

Shename.jpg

Downloaded NOOBS fraction of time and uncorrupted

Team call 9AM CST: Call terminated connection failed via Microsoft edge surprise surprise. Appears call in working on iPhone but y'all can hear me I can't hear you. Did see the chat message. Scrumy overview SORRY you heard that! Rpi Tablet case... listened Day 7 am Utube recording

Road map review:YES!

Imagining this rasppi config with molded hand holds

Piconfig1.jpg Piconfig2.jpg Piconfig3.jpg Piconfig4.jpg

Unable to add a box to scrummy stating concept case build with found object box dim. 5.5x22cm. Repeated 'refresh' error

Bld (2).jpg Bld (3).jpg Bld (4).jpg Bld (5).jpg Bld (1).jpg

Will be good to build in freecad and print so walls have some thickness to provide relief for wire 'bumps' and access. Dimensions can shrink and pi could flip so fan at back. Four holes on back of screen appear to be same dimension as mounting holes on Rpi though different sizes??? Current concept build has plenty of room for adding parts

Thurs Jan 30, 2020

Download software for Raspberrypi and SD memory card formatter

[[44]]

As a beginner I'll use NOOBS (new out of box software) also because I like the name ;)

Nozzle size change video of Marcin tutorial

[[45]]


firmware checks . . .

Wens Jan 29, 2020

Review Pulse Width Modulation (PWM) tutorial and recording of Tom's presentation

[[46]]

Board etching: Prep plate by using fine steel wool or gentle abrasive like comet to remove all oil etc. DO NOT TOUCH SURFACE, can leave fingerprints on etch. Transfer the PWM Modular Control for light dimmer (welder in development) sketch Tom developed to plate. Traced sketch and punctured with ball point to use as template for permanent black marker. Made dots through template then connected them. (Note multiple passes and streaky marks does not work)

TomSk.jpg (Note this sketch has the AC DC transfer bridge on the wrong side + needs updates)

First solution way too strong and permanent marker too dry: 2 parts Hydrocloric acid HCl31% (purchased as muriatic acid): 1 part Hydrogen Peroxide H2O23%

T1.jpg

Tifail.jpg

Tifail2.jpg

Second round new black permanent marker, correct solution 1 HCl : 2 H2O2 (note solid black will act as heat sink for IGBT)

T2.jpg

T22.jpg

T23.jpg

remove marker with gentle abrasive

Tsuccess.jpg


Tues Jan 28, 2020

From starting documentation, review ATMEGA328 to Arduino uno (led to pin 13)

Comparison.jpeg

Add switch

Be sure Rx to Tx, receive to transmit. This is not yet wired properly RX to TX and missing BREAK AT BACK OF CHIP!!!

1rxtx.jpg 2missing.jpg


This board blinks and shows the reset hack but may or may not be essential

4resethack.jpg

3needjumps.jpg


Mon Jan 27, 2020

todays excercises 1 File:Plotterpen.fcstd

Print plotter pen and clamp from existing .stl, download and open in cura [[47]]

[[48]]

[[49]]

In CURA review basic and advanced settings see... Check advanced settings for 1.2 nozzle, update profile if necessary

Steps per mm at 100

Layer check/ missing/ change thickness to 1.0 top, check'expert config' settings no check on spiral contour bottom and top if already set to 1 in Basic and missing

Filament size using 2.85

Check machine settings bed size (does not update with profile update)

save /export Gcode to SD card

note: .stl is the geometry of object, the Gcode depends on the above settings for the printer to read and print

2 Using Inkscape to Generate Gcode

from Image Started with .png, save as .svg, at top bar path/ trace bitmap under multiple scans: creates a group, select colors, smooth, and stack scans was set to 8, could likely reduce to 2, select ok then move one off.

Pathtrace.jpg

There will be multiple additional copies to delete

Vectordel.jpeg


export gcode

Sticker gcode.png

this is the link to check the Gcode before plotting as above

[[50]]


And here are the files including the un-plotted Gcode file for the OSE sticker (no added lines to 90 for alignment)

File:OESd4dStickpath4.zip


January 26

Wires connected recorded movie... need easy edit app. Free Cad draw tweezers and print Adjust alignment on extruder and to Z axis

From /OSE Microfactory download D3D Universal 8.ini Update profile for CURA for: nozzle size 1.2 retraction

[[51]]

Great prints: add links

refine free cad skills!!

January 25

Build the Printer!

Time Log request: [[52]]


January 24

ISO image download USB set uo for Microsoft Surface Book 2 running windows 10 Pro there is no access to legacy boot; uses UEFI

[[ https://askubuntu.com/questions/802768/installed-ubuntu-on-surface-book-no-inputs]]

Once ubuntu is loaded need to copy the text into file on SD card so can be copy and pasted with no use of keyboard Ubuntu 16.04 keyboard driver Microsoft surface 2 run in terminal

sudo apt-get update sudo apt-get upgrade echo "deb http://ppa.launchpad.net/tigerite/kernel/ubuntu trusty main" | sudo tee /etc/apt/sources.list.d/tigerite-kernel-trusty.list sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 984AE706D31B333A && sudo apt-get update sudo apt-get install linux-surface


error connecting to server :( so close