D3D Universal

CAD

3D Printer

• 

  Mount of Z motor to base plate. File:D3DS motor bracket x axis.fcstd. STL - File:D3DS motor bracket x axis.stl

CAD - 3D Printer Extruder

Hint: Note the small extruder gear shown is MK8- we are using an MK7. Note: Supervolacon nozzle has heat transfer issues, so we are using a 3 mm E3D v6 heat break with success (6mm threads on both sides - note that E3D v6 has 6 mm on the nozzle side, 7 mm on the cold side. Can also test Titan Aero v6 1.75 mm - which appears to have 6 mm thread on both sides. 3mm titan aero is definitely 6 mm thread on each side: see E3D_Titan_Aero_Extruder#CAD

Hint: Stable version uses MK7 drive gear (1.75 mm version) and Volcono nozzle (0.6mm tested) and 3 mm heat break and a half nut (6 mm) under the heat sink but above the thin break section. Filament is not constrained for 4 mm prior to heat break, but works great with PLA. Doesn't work with TPU.

.

• 

  Simple Extruder WIP. Github - [1]. Gitlab - [https://gitlab.com/marcin_ose/d3d-universal.

• 

  Extruder Spring for Simple Extruder. Buy + spec - [2]. FreeCAD file - File:Extruderspring.fcstd

• 

  Extruder assembly - https://gitlab.com/marcin_ose/d3d-universal/blob/master/SimpleExtruder.FCStd

• 

  Extruder motor bracket - https://gitlab.com/marcin_ose/d3d-universal/blob/master/ExtruderMotorBracket.FCStd

• 

  Extruder Active Cooling and Sensor Mount File:ExtruderActiveCoolingAndSensor.FCStd

• 

  Spring tensioner -File:SpringTensioner.FCStd

• 

  Jig to cut the heat sink -File:HeaterSinkJig.FCStd

• 

  heat sink -File:HeatSink.FCStd

• 

  Spiral linear bearing - parametric, but parameters set up for D3D -File:SpiralLinearBearing.zip

• 

  Volcano heater block. File:Volcanoheaterblock.fcstd.

• 

  File:5015blower.fcstd 5015 Blower - positionally correct for D3D Universal.

• 

  8 mm sensor. Download - File:8mmsensor.fcstd

• 

  608 skateboard 8x22x7 mm Bearing. Download - File:608Bearing.FCStd

• 

  40x10mm fan File:40x10fan.fcstd

• 

  Stepper MotorFile:Steppermotor.fcstd

• 

  Stepper Motor from FaceplateFile:Nema17face.fcstd

• 

  Super Volcano NozzleFile:SuperVolcanoNozzle.fcstd

• 

  Drive GearFile:Drivegear.fcstd

• 

  3 mm heat break.File:3heatbreak.fcstd. Re-Source - [3]

3-in-1 Machine

• 

  D3D Universal with 3D printer motor functioning as a CNC mill. - FreeCAD -[4] or Michel's repo.

• 

  D3D Simple Working Copy by Marcin - FreeCAD -File:D3Dsimple.fcstd

• 

  D3D Universal with plotter attachment. - See D3D Universal Plotter by Ferdi Meier. Gitlab - [5]

• 

  Plotter Pen Attachment. - File:Plotterpen.fcstd. From Ferdi Log.

• 

  Simple extruder for 1.75 mm filament. - By London International Academy team. From Simple Extruder.

• 

  Electric Motor. Michel Repo - [6]. Assembly in FreeCAD, Marcin's Repo - [7]

• 

  Simple spindle - By John Stager team. See Simple Spindle.

• 

  See Universal_CNC_Axis#Universal_Axis_-_Working_Document. FreeCAD file - File:D3D Universal Carriage v1910.fcstd

• 

  Arduino Uno for motor power supply. See Emmanuel Log.

• 

  D3DS motor piece with bracket for x and z-axis
  FreeCAD file -File:D3DS motor bracket.fcstd
  STL file -File:D3DS motor bracket.stl

• 

  D3DS elevated idler side piece for Y-axis
  FreeCAD file -File:D3DS idler high screwdown.fcstd
  STL file -File:D3DS idler high screwdown.stl

• 

  D3DS elevated motor side piece for Y-axis
  FreeCAD file -File:D3DS motor side high screwdown.fcstd
  STL file -File:D3DS motor side high screwdown.stl

BOM

• Spring - [8]

Working Doc

Includes Review and Data Collection

edit

Development Template

	Description	Link to Work Product	%
	DESIGN
1	Requirements + Value Proposition	[[{{{0}}} Requirements + Value Proposition]]	{{{1}}}
2	Industry_Standards	[[{{{0}}} Industry Standards]]	50
3	Conceptual Design	[[{{{0}}} Conceptual Design]]	{{{3}}}
4	Module Breakdown	[[{{{0}}} Module Breakdown]]	{{{4}}}
5	3D CAD	[[{{{0}}} 3D CAD]]	{{{5}}}
6	Calculations	[[{{{0}}} Calculations]]	{{{6}}}
7	Electronics Design	[[{{{0}}} Electronics Design]]	{{{7}}}
8	Wiring and Plumbing	[[{{{0}}} Wiring and Plumbing]]	{{{8}}}
9	Software	[[{{{0}}} Software]]	{{{9}}}
	BILL OF MATERIALS
10	BOM	[[{{{0}}} BOM]]	50
11	vBOM	[[{{{0}}} vBOM]]	{{{11}}}
12	CAM Files	[[{{{0}}} CAM Files]]	{{{12}}}
13	Cut List	[[{{{0}}} Cut List]]	{{{13}}}
	BUILD
14	Build Instructions	[[{{{0}}} Build Instructions]]	20
15	Fabrication Drawings	[[{{{0}}} Fabrication Drawings]]	{{{15}}}
16	Exploded Part Diagram	[[{{{0}}} Exploded Part Diagram]]	{{{16}}}
17	Production Engineering	[[{{{0}}} Production Engineering]]	{{{17}}}
	DATA COLLECTION
18	Build Pictures and Video	[[{{{0}}} Build Pictures and Video]]	{{{18}}}
19	Data Collection	[[{{{0}}} Data Collection]]	{{{19}}}
20	Future Work	[[{{{0}}} Future Work]]	{{{20}}}

Build

D3D Universal Axis

Platform on stilts so extruder reaches bed:

Nozzle does not reach bed:

Design Concepts

Plotter

embedded my website on wiki https://feadi.github.io/OSE/.

Played with gtlf-viewer

Code

• Marling - File:Marlin Universal.zip

Links

• D3D Simple - build from 2019