The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Universal Track Unit
 Short description | Specifications |
---|
Product Ecology |
To be built with the D3D CNC Torch Table |
---|
License |
OSHWA and OSI compliant. CC-BY-SA-4.0 International, GPLv3, DIN SPEC 3105. |
---|
Motor |
Can use a small hydraulic motor with 3-4 geardown. |
---|
Track Tensioners |
2 Identical track tensioners tensions motor and track independently |
---|
Key Specification |
Scalable to multiple motors, different geardown ratios, and capable of being stacked in dually configuration. Maximum design drive is 13,000 lb potential drawbar pull per track unit. |
---|
Key Specification |
Drive system applicable to traction machines with each track unit ranging from 1400 lb at 4 mph and 10 gpm (20 hp) at 3x geardown, to 1400 lb and 8 mph at 20 gpm (40 hp) and single motor, to 2800 lb at 4 mph and 20 gpm with dual drive motor (40 hp), to 5600 lb power operation with dual motors at 40 gpm at 4 mph (80 hp) and 6x geardown. |
---|
Construction |
CNC cut steel, stock steel, and off-the-shelf bearings + motors. 300-600 lb each Universal Track Unit. |
---|
Productivity |
Practical range from 10-80 hp per drive unit using the same parts, for applications from small walk-behind tractors to small bulldozers. |
---|
Cost |
$300 for Slow Solar version - $600 for standard power |
---|
Completion Status |
---|
Describe whether built, prototyped, etc. Link to relevant Genealogy and Status of Completion. | Do you want more of this? Get Involved | v · d · e |
|
Development
Enterprise
Links