3D Printer Genealogy

Versions of 3D Printers built by OSE:

• D3D Universal v20.07. 3D printed base to streamline design and locate mounting points. One-piece Universal Axis components.
• D3D Pro v20.07 - next generation, using 1-piece universal axis pieces - D3D Universal v20.07. Higher modularity, easier frame mounting, part count reduced from 46 to 26 for each Universal Axis.
• D3D Universal Hamburg - D3D_Universal_With_Dual_Z_Axis_Version_0_2_0
• D3D Universal Hamburg - D3D_Universal_With_Dual_Z_Axis_Version_0_1_0
• D3D v20.04.27. 18" bed, 1800W heater. AKA D3D Pro 3.
• D3D v20.04 - 12" bed, 1200W heater. AKA D3D Pro 2.
• D3D Mega v19.12 - 2'x2' print bed for printing chairs, rubber tracks for tractors, foundation forms, and more. In progress.
• D3D Universal - Milestone of an industrial-grade 1.75 mm OSE extruder design has been reached.
• D3D v19.11 - Current production model using corners that fit 1/8"x1.5" angle metal.
• D3D v19.06 Mega - concept only
• D3D v19.06 - iteration prior to angle frame
• D3D Simple - a 3 axis version with moving bed.
• D3D v19.04 - Eco edition. Upgraded to 24V control system, silent stepper drivers, 500W heatbed for 1 minute bed heatup time, and insulated heatbed for 30%-60% lower energy consumption while printing. Added built-in GFCI electrical safety breaker as a standard feature. Uses the Titan Aero extruder.
• D3D v19.02 - Similar to D3D v18.10 but using 12" frame, 8" print bed, and Titan Aero with Volcano nozzle. New end stops (hung on rods) optimized for space, and Y parallel optimized for automatic parallel of axes. In order to achieve larger print area with smaller frame, we introduced the overslung extruder design. Thus, the 2 main improvements are overslung extruder and auto-parallel on the y axis.Future work: rubber-optimized extruder at low cost using D3D Mill for aluminum milling. See Y Axis Auto-parallel.
• D3D_Mini_PVC - 2019 February current work on a smaller, low-cost version. Optimization goal for fast, high quality printing via frame stabilization.
• D3D v18.12 - new omnidirectional fan shroud from Lulzbot Mini 2. OSE build in January, and replicated Feb 2019 at Highland Community College.
• D3D v18.11 - 12" bed version.
• D3D v18.10 - (renamed from D3D v18.09.2 for simplicity). Uses Titan Aero. Full Product Release as in our official current D3D Manaul v18.10 - the 3D Printer Manual
• D3D v18.09.1 - back to Titan Aero
• D3D v18.09 - Remove Magnets, Use JB Weld + Plastic Bearings
• D3D v18.08 - Main Trunk Continued
• D3D v18.07 - Main trunk. 8" bed.
• D3D v18.06.21 - Oregon Build. Main trunk, 8" bed.
• D3D v18.06.12 - Ruslan in Hamburg - fork with aluminum frame.
• D3D v18.06 - Lawrence Build. Main trunk, 8" version.
• D3D v18.04 - PVC pipe, 8" bed
• D3D_Ohio_v18.02 - PVC pipe 12" bed
• D3D v18.01 - 12" bed, steel frame
• D3D Saudi Arabia
• D3D Australia - German
• D3D Hamburg - Babasile Daniel
• D3D Germany - Oliver
• D3D - builds started in 2017 - using the Universal Axis system. Open Source Ecology headquarters.
• Folgertech Prusa i3 - 2016; deprecated, entry level model for quick learning; not high on OSE Spec of modularity + scalability.
• Kittaz - 2014

Change Log

• As of 12/3/18 v18.10 - known bugs are: positive bump endstop holder does not fit around motor just by 1 mm, whereas magnets worked before as they had play. Print Cooling Fan: needs nozzle optimization. X axis mounting: needs procedure optimization for axis tightness. Print area: using 2016 extruder holder eats up bed space; need to optimize bed space. Print volume: optimize extruder mounting to access 3" of additional vertical space with horizontal X axis mounting. Needs: 3D Printer Workbench Specification. End cable chain: needs bigger hole. Fan mount: thinner + 100% print

Production Engineering Improvements

• Idler detail - nut catcher cleaning + half circle cleaning
• Carriage - half circle cleaning
• Motor - hole cleaning, nut catcher cleaning
• Endstops - get rid of them via trinamic or modify bump version
• Spool holder - hole fit
• Sensor holder - sensor fit

Links

Hint: Note that to design new versions of the 3D printer, you want to use small, simple files. We have ones ~20k for each axis.

• Note that D3D_Part_Library#Assembly_Index contains the simplified assemblies. These are to be used any time that a new version of the 3D printer is to be designed from scratch.
• Simplified axis files - X, Y, Z - the smallest ones today are also used on the D3D CNC Circuit Mill
• D3D Integration has files that are on the order of 5MB and 1MB for each axis. Still too large for prototyping.
• D3D