CNC Torch Table
| CNC Torch Table | ||
|---|---|---|
| Home | Research & Development | Bill of Materials | Manufacturing Instructions | User's Manual | User Reviews | 
| |
| CNC Torch Table | ||
|---|---|---|
| Home | Research & Development | Bill of Materials | Manufacturing Instructions | User's Manual | User Reviews |
| |
Overview
The CNC Torch Table is a table capable of cutting designs out of metal with a 2-axis torch controlled by computer.
Detailed Description
Wanted: lengthy paragraph detailing CNC Torch Table major functions
Solution Statement
The CNC Torch Table provides a quicker solution for cutting sheet metal, especially into intricate patterns that are difficult to cut by hand.
Product Ecology
The CNC Torch Table is important to the [GVCS]. Parts of the LifeTrac (arm mounting plates) require a level of precision that is difficult to replicate by hand. CNC ensures precisely measured torches.
General Fabrication
See Product Ecologies for more information.
Components
Wanted: Brief description of each of the major parts of the CNC Torch Table
Specifications
| Spec | Value |
|---|---|
| Spec | Value |
OSE Project Status/Schedule
For Prototype II, we might want this:
- First step: perfection of mechanical design for replicability to 1/32" over 4x8' area
- Need open source controller, end stops, and z height automation/detection.
- We could use existing structure, with modifications. Right now we use gear rack. We can simplify the carriage structure.
- If we want to go all out - we could use full gas flow control - but that is probably beyond the scope of the present program - as it would require expensive parts until we can manufacture them ourselves.
- Open source stepper motors would be a good addition - if we could find somebody to design/fab them - that would be great.
- Computer vision for fully automated cutting would be the last step.
- Next steps: stiffening frame design to accommodate router heads
Wanted: Versioning, milestones met, future goals
