|
|
| (112 intermediate revisions by one other user not shown) |
| Line 1: |
Line 1: |
| {{ToolTemplate|ToolName=Industrial Robot}} | | {{GVCS Header}} |
|
| |
|
| ---- | | ---- |
|
| |
| =Partial Prototyping Bill of Materials=
| |
|
| |
| ==Frame==
| |
|
| |
| Base Angle (8"A x 8"B x 27" Length x 0.5" Thickness, A36 steel angle, x1)
| |
|
| |
| ==Gearbox==
| |
|
| |
| Gearbox 1,2 Input Plate (13" x 7.5" x 0.25", A36 steel plate, x1)
| |
|
| |
| Gearbox 1,2 Side Plate (7.5" x 5" x 1", A36 steel plate, x2)
| |
|
| |
| Gearbox 1,2 Cover Plate (13" x 5" x 0.125", A36 steel plate, x2)
| |
|
| |
| Gearbox 1,2 Outer Race Plate (6" x 6" x 1", A36 steel plate, x4)
| |
|
| |
| Gearbox 1,2 Spacing Plate (6" x 6" x 2", A36 steel plate, x2)
| |
|
| |
| Gearbox 1,2 Output Shaft (1.25" diameter, keyed shaft
| |
|
| |
| Gearbox 1,2 Inner Race
| |
|
| |
| Gearbox 1,2 Output Hub (6" diameter x 3" length, A36 round bar)
| |
|
| |
| Gearbox 1,2 Support Hub (5" diameter
| |
|
| |
| Bolts (1/2 – 13,
| |
|
| |
| Nuts (1/2 – 13, x
| |
|
| |
| ==Hydraulics==
| |
|
| |
| Hydraulic motor 1,2 [https://www.surpluscenter.com/item.asp?item=9-7469&catname= 500]
| |
|
| |
| Hydraulic motor 1,2 mounting bolts
| |
|
| |
| Needle valve 1,2
| |
|
| |
| Solenoid valve 1,2
| |
|
| |
| Solenoid valve subplate 1,2
| |
|
| |
| Solenoid valve subplate 1,2 mounting bolts
| |
|
| |
| ==Electronics==
| |
|
| |
| Microcontroller
| |
|
| |
| Stepper motor driver
| |
|
| |
| Solenoid driver
| |
|
| |
| Encoder
| |
|
| |
| ==Stepper mount==
| |
|
| |
| Stepper motor
| |
|
| |
| Stepper motor mounting screws
| |
|
| |
| Stepper mount angle
| |
|
| |
| Stepper mount plate
| |
|
| |
| Shaft coupling bar
| |
|
| |
|
| =Bill of Materials= | | =Bill of Materials= |
|
| |
|
| ==Hydraulics==
| | <html> |
| | | <iframe width='1000' height='600' frameborder='0' src='https://docs.google.com/spreadsheet/ccc?key=0Atf8i1Ts8JqbdGlrSW5oTlpKRGNmUkwwQndrelFQU1E&hl=en_US&key=0ApN4BXK1pgnKdGppQ012eWdVQzFaRVpGYjNJb09iZUE&output=html&widget=true'></iframe> |
| *Powercube (1500psi, 18GPM)
| | </html> |
| | |
| *Hydraulic Motor 1 [http://www.surpluscenter.com/item.asp?item=9-9338&catname=hydraulic 300]
| |
| *Hydraulic Motor 2 [http://www.surpluscenter.com/item.asp?item=9-9338&catname=hydraulic 300]
| |
| *Hydraulic Motor 3 [http://www.surpluscenter.com/item.asp?item=9-7076-400&catname=hydraulic 160]
| |
| *Hydraulic Motor 4 [http://www.surpluscenter.com/item.asp?item=9-7076-400&catname=hydraulic 160]
| |
| *Hydraulic Motor 5 [http://www.surpluscenter.com/item.asp?item=9-7076-400&catname=hydraulic 160]
| |
| *Hydraulic Motor 6 [http://www.surpluscenter.com/item.asp?item=9-7076-400&catname=hydraulic 160]
| |
| | |
| *Solenoid Valve (1-6, x6) [http://www.surpluscenter.com/item.asp?item=9-7748&catname=hydraulic 300]
| |
| *Solenoid Valve Subplate (1-6, SAE6, x6) [http://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-4070-1 288]
| |
| | |
| *Needle Valve (1-6, 1/2NPTF, x6) [http://www.surpluscenter.com/item.asp?item=9-7961-8&catname=hydraulic 180]
| |
| | |
| *Pressure Relief Valve [https://www.surpluscenter.com/item.asp?item=9-4127&catname=hydraulic 42]
| |
| | |
| *Hose (1NPTM, 3', x3) [http://www.surpluscenter.com/item.asp?item=919-2236&catname=hydraulic 87]
| |
| | |
| *Hose (1NPTM, 6', x1) [http://www.surpluscenter.com/item.asp?item=919-2272&catname=hydraulic 47]
| |
| | |
| *Hose (1/2NPTM, 3', x18) [http://www.surpluscenter.com/item.asp?item=905-1236&catname=hydraulic 180]
| |
| | |
| *Hose (1/2NPTM, 8', x6) [http://www.surpluscenter.com/item.asp?item=905-1296&catname=hydraulic 128]
| |
| | |
| *Hose (1/2NPTM, 6', x6) [http://www.surpluscenter.com/item.asp?item=905-1272&catname=hydraulic 84]
| |
| | |
| *Hose (1/2NPTM, 4', x4) [http://www.surpluscenter.com/item.asp?item=905-1248&catname=hydraulic 44]
| |
| | |
| *Adaptor (1NPTM to 1/2NPTF, x6) [
| |
| | |
| *Adaptor (1/2NPTM to 1/2NPTM, x6) [http://www.surpluscenter.com/item.asp?item=9-5404-8-8&catname=hydraulic 12]
| |
| | |
| *Adaptor (1/2NPTF to SAE6M, x28) [http://www.surpluscenter.com/item.asp?item=9-6405-6-8&catname=hydraulic 84]
| |
| | |
| *Adaptor (1/2NPTF to SAE10M, x4) [http://www.surpluscenter.com/item.asp?item=9-6405-10-8&catname=hydraulic 12]
| |
| | |
| *Adaptor (SAE4M to SAE6F, x4) [http://www.surpluscenter.com/item.asp?item=9-6410-4-6&catname=hydraulic 14
| |
| | |
| ==Electronics==
| |
| | |
| *Microcontroller [http://www.sparkfun.com/products/9949 65]
| |
| | |
| *Solenoid Driver (x2) [http://store.makerbot.com/electronics/electronics-kits/pwm-driver-v1-1-kit.html 26]
| |
| | |
| *Stepper Motor Driver (x6) [http://www.sparkfun.com/products/10267 90]
| |
| | |
| *Power Supply (as necessary to connect to 6 step motor drivers, 2 solenoid drivers, and 6 encoders)
| |
| | |
| *Wire
| |
| | |
| ==Frame==
| |
| | |
| *Foundation Underplate (24" by 24" by 0.5" A36 steel plate [http://www.discountsteel.com/items/A36_Hot_Rolled_Steel_Plate.cfm?item_id=189&size_no=6 90]
| |
| | |
| *Foundation Pillar (2” by 2” by 12”, A36 steel square bar, x4) [http://www.discountsteel.com/items/A36_Hot_Rolled_Steel_Square_Bar.cfm?item_id=180&size_no=11 62]
| |
| | |
| *Foundation Overplate (16” by 16” by 0.5” A36 steel plate) [http://www.discountsteel.com/items/A36_Hot_Rolled_Steel_Plate.cfm?item_id=189&size_no=6 51]
| |
| | |
| *Base Angle (8”A/8”B by 20”L by 1”T A36 steel angle) [http://www.discountsteel.com/items/A36_Hot_Rolled_Steel_Equal_Leg_Angle.cfm?item_id=183&size_no=50 154]
| |
| | |
| *Main Arm (1” by 4” by 15” A36 steel bar) [http://www.discountsteel.com/items/A36_Hot_Rolled_Steel_Flat_Bar.cfm?item_id=184&size_no=194 23]
| |
| | |
| *Forearm Angle (8”A/8”B by 20”L by 0.5”T A36 steel angle) [http://www.discountsteel.com/items/A36_Hot_Rolled_Steel_Equal_Leg_Angle.cfm?item_id=183&size_no=48&pieceLength=cut&len_ft=2&len_in=0&len_fraction=0&pieceCutType=26|1&itemComments=&qty=1 83]
| |
| | |
| *Forearm Plate A (8” by 8” by 0.25T A36 steel plate, x1) [http://www.discountsteel.com/items/A36_Hot_Rolled_Steel_Plate.cfm?item_id=189&size_no=2 50]
| |
| | |
| *Forearm Plate B (8” by 4” by 0.5” A36 steel plate, x1) [http://www.discountsteel.com/items/A36_Hot_Rolled_Steel_Plate.cfm?item_id=189&size_no=6&pieceLength=cut&wid_ft=0&wid_in=8&wid_fraction=0&len_ft=0&len_in=4&len_fraction=0&pieceCutType=30|1&itemComments=&qty=1 24]
| |
| | |
| *Forearm (2” by 2” by 12” by 0.25T carbon steel square tube) [http://www.discountsteel.com/items/Structural_Mechanical_Steel_Square_Tube.cfm?item_id=206&size_no=46 11]
| |
| | |
| *Wrist Angle (8”A/8”B by 20”L by 0.5”T A36 steel angle) [http://www.discountsteel.com/items/A36_Hot_Rolled_Steel_Equal_Leg_Angle.cfm?item_id=183&size_no=48&pieceLength=cut&len_ft=2&len_in=0&len_fraction=0&pieceCutType=26|1&itemComments=&qty=1 83]
| |
| | |
| ==Gear Reducer 1,2==
| |
| | |
| *Gearbox 1,2 Input Plate (13" x 7", 0.5" A36 steel plate, x2)
| |
| *Gearbox 1,2 Side Plate (7" x 5" x 1" A36 steel plate, x4)
| |
| *Gearbox 1,2 Cover Plate (13" x 5" x 0.125" A36 steel plate, x2)
| |
| *Gearbox 1,2 Output Shaft (1.25"dia x 4" A36 steel round bar, x2)
| |
| *Gearbox 1,2 Input Spur Gear (3" pitch dia, 20deg pressure angle, 18dia pitch)
| |
| *Gearbox 1,2 Output Spur Gear (6" pitch dia, 20deg pressure angle, 18 dia pitch)
| |
| *Gearbox 1,2 Output Hub (
| |
| *Gearbox 1,2 Output Key (
| |
| *Gearbox 1,2 Outer Race Plate (
| |
| *Gearbox 1,2 Inner Race (
| |
| *Gearbox 1,2 O-ring Seal
| |
| | |
| ==Gear Reducer 3,4,5,6==
| |
| | |
| *Gearbox 3,4,5,6 Input Plate (12" x 7.5" x 0.25" A36 steel plate, x4)
| |
| *Gearbox 3,4,5,6 Side Plate (7.5" x 5" x 1" A36 steel plate, x8)
| |
| *Gearbox 3,4,5,6 Cover Plate (12" x 5" x 0.125" A36 steel plate, x4)
| |
| *Gearbox 3,4,5,6 Output Shaft (1"dia x 4" A36 steel round bar, x4)
| |
| *Gearbox 3,4,5,6 Input Spur Gear (3" pitch dia, 20deg pressure angle, 18 diametral pitch)
| |
| *Gearbox 3,4,5,6 Output Spur Gear (6"pitch dia, 20deg pressure angle, 18 diametral pitch)
| |
| *Gearbox 3,4,5,6 Output Hub (
| |
| *Gearbox 3,4,5,6 Output Key (
| |
| *Gearbox 3,4,5,6 Outer Race Plate (
| |
| *Gearbox 3,4,5,6 Inner Race (
| |
| *Gearbox 3,4,5,6 O-ring Seal
| |
| | |
| ==Stepper Motor Mounts==
| |
| | |
| *Stepper Motor (x6) [http://www.adafruit.com/products/324 84]
| |
| | |
| *Stepper Angle (4”A/4”B, 4”L, 0.25”T, A36 steel angle, x6) [http://www.discountsteel.com/items/A36_Hot_Rolled_Steel_Equal_Leg_Angle.cfm?item_id=183&size_no=33 24]
| |
| | |
| *Holding Plate (3” by 3” by 0.25” A36 steel plate, x12) [http://www.discountsteel.com/items/A36_Hot_Rolled_Steel_Plate.cfm?item_id=189&size_no=2 29]
| |
| | |
| *Shaft Bar (0.5” by 0.5” by 1” A36 steel bar, x6) [http://www.discountsteel.com/items/A36_Hot_Rolled_Steel_Square_Bar.cfm?item_id=180&size_no=4 36]
| |
| | |
| *Setscrews ( )
| |
| *Bolts ( )
| |
| *Washers ( )
| |
| *Nuts ( )
| |
| | |
| ==Shaft Encoders==
| |
| | |
| ==Welding==
| |
| | |
| *Welding Consumables
| |
| | |
|
| |
|
| | [https://docs.google.com/spreadsheet/ccc?key=0Atf8i1Ts8JqbdGlrSW5oTlpKRGNmUkwwQndrelFQU1E&hl=en_US Edit Spreadsheet] |
|
| |
|
| [[Category: Industrial Robot]]
| | {{GVCS Footer}} |
