Commitments for June 29, 2013

Discussed in part the work flow for future Design Sprints. Scott Eisele and Jonathan Miller interested in DPV

Leo Log - working on Hydrafabber Sketchup mount of spindle including real drawing of spindle components
Jonathan Miller - Jonathan Log - concept of LifeTrac.
Albin Log - wheel unit integration - next step is full DXFs for hub, building on Justin Log and Chris Log for hubs and wheels.
Scott Log - work with Jonathan on articulated LifeTrac based on LifeTrac_Development_Brief

Commitments for June 22, 2013

Caleb Bennett - punch element continued, stiff version - Caleb Log
John Stager - CNC Mill Spindle - John Log
Nate Wettstein - Download FreeCAD and TAZ tool mount - to integrate CNC Circuit Mill Spindle - Nate Log -
Leo Riveron - Continuing on CNC Circuit Mill Mount on Hydrafabber. Leo Log.
Tibor Sovis - Tibor Log
Justin Downs - GEDA - 3" hub - Justin Log
Salvatore - Public Domain Stepperlolu - Salvatore Log
Gene Griffith - Hydraulic Motors - Gene Log
Yann - major progress - Yann Log
Jean-Baptiste Vervaeck - Jean-Baptiste Log
Leandra - Leandra Log
Cory - Cory Log
Chris - Chris Log
Jordan - Jordan Log
Lucas - Lucas Log
James- James Log
Gary - Gary Log
Tim Boyd - Found diodes - 10W in 100 microns - Tim Log
Stefano - Stefano Log - Gary took over on truck suspension.

Tim Boyd - friend designed power supplies for Synrad CO2. 2W Laser Diodes. - Put work up at Tim Log
Albin Zuech - keyway info - Albin Log
Colm Herbert - microtrac tracks with Cory - Colm Log
James Wise - feedback on the Bulldozer geardown - James Log
Lucas - Microtrac hydraulics - Lucas Log
Jordan - Pivot hydraulics - Jordan Log
Cory - Hydraulics, wheel. - Cory Log
Leandra - blade hydraulics - Leandra Log
Chris - hydraulics diagram - foot pedal - Chris Log
John Stager - pass on the car wheel drive info - see MIT Car and work with Yann Log
Andrew Must - advanced program manager - microtrac coordination with Cory - Andrew Log
Sam - Backhoe reduction to 6' plus cylinder fit - Samthetechie Log
Caleb Bennett - with Marcin on Holepunch element - starting Caleb Log
Leo - Chicago - hydraulic controls for cab - hand levers with Chris - Leo Log
Stefano - Milan, Italy - feet of backhoe - building upon Cory Log to create Stefano Log
Brian Peters - backhoe bucket - Brian Log
Salvatore - started Salvatore Log for the building upon Powerlolu
Rob - Popcorning the Hydraulics 101 video - See Rob Log
Yann Lischetti - http://velocar.fr/ - Yann Log
Gene Griffith - gear hydraulic motor - conceptual design by next week - Gene Log

Brian Peters - backhoe bucket + stick and boom finishing
Jonathan Miller - Wikispeed car body conversion to Sketchup - Wikispeed Sketchup
Joe Justice - discussion on OSE-Wikispeed 660
Rob Kirk - Car negotiations with Wikispeed
Chris DeAngelis - Microtrac tracks - finishing MicroTrac design
Justin Burnett - quick attach wheel - design validation, ready for Bulldozer Geardown and 3" quick attach wheel module.
Marcin - Bulldozer Geardown concept work
James Wise - Bulldozer Geardown
Sam Carlisle - cylinder fitting on backhoe.
Husam - second printer up and running for microtrac tracks printing.

Husam - printing DfF of tractor frame
Sam Carlisle - Backhoe Pivot Joint - mounting between Boom of Backhoe and tractor rear
Audrey Rampone - Community Management
Luke Shields - wireframe for Concept Design Page
Brian Peters - doing Backhoe Stick and Boom and range of motion calculations
Justin Downs - completed the Quick Attach Plate
Marcin Jakubowski - CNC Torch Table controller
Rob Kirk - negotiating the Wikispeed Collaboration
Justin Burnett - Quick Attach Wheel Module - in progress
Joe Justice - negotiations on Wikispeed Buildout at Factor e Farm

Leo - 2 hours on design of precision quick connect tool mount, see Leo Log
Mike Jordan - Sketchup of Microtrac tracks for STL and 3D print. See Mike Jordan Log
Husam - Pivot module for backhoe and articulated tractors.
Rob - scripts
Marcin - Bulldozer geardown module; backhoe module finishing.