CNC Torch Table

Main > Digital Fabrication > RepLab Tools > Torch Table

---

Torch Table Prototype II Design.

General Fabrication Product Ecology

The CNC Torch Table is a computer controlled machine capable of cutting two-dimensional shapes out of large steel plates. It is a valuable tool for replication because of this capability. Many parts that make up the 50 GVCS Tools can be cut on the CNC Torch Table.

The CNC Torch Table provides a quicker solution for cutting sheet metal, especially into intricate patterns that are difficult to cut by hand.

Status

CNC Torch Table II
Design is finished and prototyping is underway.
Zipped SolidWorks File Sketchup File

CNC Torch Table I
Prototyped and Tested in experimental production runs. Identified software toolchain as a performance bottleneck.

Design Rational

The following points have been considered throughout Torch Table development.

• Rigid design to maximize precision
• Perfect mechanical design for replicability to 1/32" over 5.5' x 11.5' area
• Ability to cut 20 feet long 4" square tube.
• Ability to cut 10 feet long 6" square tube. (without removal of vertical slats)
• Ability to cut 10 feet long 10" square tube. (with removal of vertical slats)

Product Ecology

General Fabrication Product Ecology

Made with

• Induction Furnace - Steel
• Multimachine - Precision Guides, bearings

Creates

• Tractor - Plates, holes
• CEB Press - Holes
• QA Plates

See Product Ecologies for more information.

Photos of other Torch Tables

See Also

• Torch Table Build Prototype 1 Completion
• Plasma_Cutter_Design
• Torch Table Specifications
• Open_Source_Torch_Table_Prototype_II
• Blog Post
• Wikipedia: CNC
• Torch

CNC Torch Table Control

• CNC Torch Table Control Overview

The Global Village Construction Set
Habitat	CEB Press	Cement Mixer	Sawmill	Bulldozer	Backhoe
Agriculture	Tractor	Seeder	Hay Rake	Well-Drilling Rig
	Microtractor	Soil Pulverizer	Spader	Hay Cutter	Trencher
	Bakery Oven	Dairy Milker	Microcombine	Baler
Industry	Multimachine	Ironworker	Laser Cutter	Welder	Plasma Cutter
	CNC Torch Table	Metal Roller	Rod and Wire Mill	Press Forge	Universal Rotor
	3D Printer	3D Scanner	CNC Circuit Mill	Industrial Robot	Chipper Hammermill
	Drill Press	Induction Furnace
Energy	Power Cube	Gasifier Burner	Solar Concentrator	Electric Motor Generator	Hydraulic Motor
	Steam Engine	Heat Exchanger	Wind Turbine	Pelletizer	Universal Power Supply
	Nickel-Iron Battery
Materials	Aluminum Extractor	Bioplastic Extruder
Transportation	Car	Truck
Key	Design	Planning	Prototype	Almost done	Full Release