CEB Press/Bill of Materials

---

Official CEB Press Bill of Materials

This is the first official release of a complete Bill of Materials for the OSE CEB Press - The Liberator. Last updated July 20, 2011.

Warning: The documentation for the CEB Press is undergoing a thorough overhaul. CAD models and written directions are presently obsolete. For more information, see Talk:CEB_Press#Documentation_overhaul_in_progress. When the models, specifications and text on this article have been thoroughly reviewed, updated when necessary, and confirmed as whole and accurate, this warning may be removed. The Bill of Materials will likely only be accurate when all parts manufacturing instructions are verified as correct (specs for materials have changed).

Frame Metal

To be sourced from any metal shop.

(You can save a copy of this Bill of Materials from the original Google spreadsheet or Open Document Format)

Note: the Open Document Format document contains several sheets. The sheets contain formulas. The Cleaned Breakdown List is a part-by-part breakdown of the machine by assembly. The Order Sheet is what you fax to your metal shop to make the metal order. Any component changed on the Breakdown List will automatically be tallied on the Order Sheet.

Steel Order Sheet - 'Super' CEB Press - Makes Larger Bricks

Note: eliminate 1/4"x2"x3" angle and replace with 1/4"x2"x2" - [2] 20-3/4" and [2] 5-1/2" for a total of 52-1/2"

Electronics

Electronic Components necessary to complete Arduino Breakout board:

Quantity	Part Number	Description	Unit Price	Distributor
8	277-1251-ND	CONN TERM BLOCK 6POS 5.08MM PCB	2.12	digikey.com
1	ED7150-ND	SIP SOCKET 50 POS STRAIGHT PCB	7.62	digikey.com
1	ED7264-ND	SIP HEADER 64 POS STRAIGHT PCB	8.85	digikey.com
1	P100BACT-ND	RES 100 OHM CARBON FILM 1/4W 5%	0.09	digikey.com
1	160-1702-ND	LED 5MM GREEN TRANSPARENT	0.38	digikey.com
1	7914G-000EDKR-ND*	SWITCH TACT 4MM SQ SMD GULL WING	1.54	digikey.com

* This is a SMD switch, should order a "through hole" switch instead - I didn't see the part on the DigiKey website, though. - Tom

Previous Work

• CEB Bill of Materials (June 2011)
• CEB Modeling (July 2008)
• CEB Press 2 (April 2009)
• Bill of materials for The Liberator II (Nov 2009). This appears to be the 'manual version'
• Calculated Bill of Materials for The Liberator Beta v1.0 (Nov 2009)
• CEB Fabrication (Feb 2010)
• The Liberator Packing List (June 2010)
• FeF Liberator Fabrication
• Full Produce Release - Parts Costs - (June 2010)
• Full Product Release - The Liberator, Manual Version (June 2010)
• The Liberator BOM (June 2010)
• The Liberator Master Bill of Materials (Aug 2010)
• CEB Prototype 1 Fab (Nov 2010)

The Global Village Construction Set
Habitat	CEB Press	Cement Mixer	Sawmill	Bulldozer	Backhoe
Agriculture	Tractor	Seeder	Hay Rake	Well-Drilling Rig
	Microtractor	Soil Pulverizer	Spader	Hay Cutter	Trencher
	Bakery Oven	Dairy Milker	Microcombine	Baler
Industry	Multimachine	Ironworker	Laser Cutter	Welder	Plasma Cutter
	CNC Torch Table	Metal Roller	Rod and Wire Mill	Press Forge	Universal Rotor
	3D Printer	3D Scanner	CNC Circuit Mill	Industrial Robot	Chipper Hammermill
	Drill Press	Induction Furnace
Energy	Power Cube	Gasifier Burner	Solar Concentrator	Electric Motor Generator	Hydraulic Motor
	Steam Engine	Heat Exchanger	Wind Turbine	Pelletizer	Universal Power Supply
	Nickel-Iron Battery
Materials	Aluminum Extractor	Bioplastic Extruder
Transportation	Car	Truck
Key	Design	Planning	Prototype	Almost done	Full Release