Welder/Research Development: Difference between revisions
< Welder
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
==Research== | ==Research== | ||
*Current of a MIG welder is determined by the feed wire diameter. See typical currents - [https://www.millerwelds.com/resources/article-library/miggmaw-101-setting-the-correct-parameters] | *Current of a MIG welder is determined by the feed wire diameter. See typical currents - [https://www.millerwelds.com/resources/article-library/miggmaw-101-setting-the-correct-parameters] | ||
*Typical voltage 15-24 v | |||
==Industry Standards== | ==Industry Standards== | ||
Revision as of 23:11, 11 June 2017
| Welder | ||
|---|---|---|
| Home | Research & Development | Bill of Materials | Manufacturing Instructions | User's Manual | User Reviews | 
| |
Overview
Research pertaining to the Welder.
Research
- Current of a MIG welder is determined by the feed wire diameter. See typical currents - [1]
- Typical voltage 15-24 v
Industry Standards
Team
- Discussion with Michael Kadie
See Also
