CEB Press/Manufacturing Instructions

Warning: The documentation for the CEB Press is undergoing a thorough overhaul. CAD models and written directions are presently obsolete. For more information, see Talk:CEB_Press#Documentation_overhaul_in_progress. When the models, specifications and text on this article have been thoroughly reviewed, updated when necessary, and confirmed as whole and accurate, this warning may be removed. The CEB CAD model visible above is known, for instance, to outdated with incorrect dimensions on some parts; it will likely be updated only after every component part is thoroughly reviewed and made current.

This page is the starting point for making a CEB Press:

• The Fabrication section details the process of making the parts from raw materials
• The Assembly section identifies the process of putting the parts together to form the machine
• The Programming section deals with automating the process by using a microcontroller called an Arduino to control the hydraulic system
• The Testing section describes processes to perform to test the functionality of a CEB Press

Fabrication

Simple plates

Good to start with, all you need to do is punch/drill holes.

1. Brick Holder Plate
2. Controller Mount-Needs model. 10/4
3. Dirt-Keeper Plate
4. Valve Mount- Needs model. 10/9

Structural Supports

1. Arms - primary-The models are correct except that the left arm also needs the slot for the roller guides.-Bri
2. Arms - secondary
3. Feet
4. Grate mounts-
5. Hopper supports-needs accurate diagram
6. Leg Holders-needs model 10/9

Soil Loading System

1. Hopper sheet metal-
2. Hopper mounting plate-
3. Soil grate- needs model. 10/7
4. Soil Shaker motor unit-
5. Soil Shaker-This build is good, however we're adding in a guard for the hammer soon.

Machine Core

1. Frame with main cylinder-Page is finally done! the model can be completed now. 10/18
   • Main Cylinder Preparation- Needs model 10/18
   • Main Frame Preparation-Needs models 10/18
2. Roller guides
3. Soil loading drawer-I updated the rail placement. Now we need a model and diagrams for the "normal" CEB. Also, could somebody go back and change all of the a.) b.) c) ... things into numbers? -Brianna 10/7

Hydraulics

1. Hoses - Secondary cylinder hose unit-

OPTION:

Manual

• Hydraulic control valve-I will update with my manual version w/pictures and schematic. -Bunny 11/5

Automatic

• Controller Box-The information here needs to be updated with correct circuitry, diagrams and pictures. Dorkmo has a board design that removes the breakout board putting the Detroit and breakout all in one. Will see if he can update with that info. -Bunny 11/5
• Solenoid valve-This wiring needs to be verified. -Bunny 11/5
• Solenoid Driver -Code needs to be verified. -Bunny 11/5
• Sensor Unit

Assembly

Final Assembly and Job Site Setup

Programming

An Arduino is the microprocessor that controls the CEB Press's actions. It must be programmed with the CEB Press's unique program for making bricks.

Source code can be found at github: https://github.com/OSE/ceb-controller

Old code:

• CEB Control Source Code v1.01 Annotated
• CEB Control Source Code v1.01
• CEB Control Source Code v1.0

• Control Code Site

See Also

Brianna Log

The Global Village Construction Set
Habitat	CEB Press	Cement Mixer	Sawmill	Bulldozer	Backhoe
Agriculture	Tractor	Seeder	Hay Rake	Well-Drilling Rig
	Microtractor	Soil Pulverizer	Spader	Hay Cutter	Trencher
	Bakery Oven	Dairy Milker	Microcombine	Baler
Industry	Multimachine	Ironworker	Laser Cutter	Welder	Plasma Cutter
	CNC Torch Table	Metal Roller	Rod and Wire Mill	Press Forge	Universal Rotor
	3D Printer	3D Scanner	CNC Circuit Mill	Industrial Robot	Chipper Hammermill
	Drill Press	Induction Furnace
Energy	Power Cube	Gasifier Burner	Solar Concentrator	Electric Motor Generator	Hydraulic Motor
	Steam Engine	Heat Exchanger	Wind Turbine	Pelletizer	Universal Power Supply
	Nickel-Iron Battery
Materials	Aluminum Extractor	Bioplastic Extruder
Transportation	Car	Truck
Key	Design	Planning	Prototype	Almost done	Full Release