Power Cube/Manufacturing Instructions: Difference between revisions
Jump to navigation
Jump to search
Tom Griffing (talk | contribs) |
Tom Griffing (talk | contribs) |
||
| Line 48: | Line 48: | ||
# [[PowerCube_Keyswtich and Choke Brackets|Keyswtich and Choke Brackets]] | # [[PowerCube_Keyswtich and Choke Brackets|Keyswtich and Choke Brackets]] | ||
# [[PowerCube_Solenoid Mounting Bolts|Solenoid Mounting Bolts]] | # [[PowerCube_Solenoid Mounting Bolts|Solenoid Mounting Bolts]] | ||
# [[PowerCube_ThrottleSwitchMounts|Throttle and Starter switch mounts]] | |||
# [[PowerCube_Quick Attach Plates|Quick Attach Plates]] | # [[PowerCube_Quick Attach Plates|Quick Attach Plates]] | ||
# [[PowerCube_Finish and Painting|Finish and Painting]] | # [[PowerCube_Finish and Painting|Finish and Painting]] | ||
Revision as of 15:28, 24 December 2011
| Power Cube | ||
|---|---|---|
| Home | Research & Development | Bill of Materials | Manufacturing Instructions | User's Manual | User Reviews | 
| |
| |||||||||||
Overview
Intro to Power Cube Construction Script
Preparation
Subassembly Fabrication
The purpose of this section is to cut the raw steel into required lengths and shapes as required for final assembly. These step includes drilling and cutting steel up to 3/8” in thickness.
- Engine & Hydraulic Pump mounts
- Quick attach mounts
- Fuel tank
- Oil Cooler Mount
- Key Switches and Choke
- Electrical cables
- Battery Mount
- Mufflers
- Hydraulic reservoir
Assembly
Power Cube assembly requires all the parts listed in the Bill Of Materials to be available and prepared as detailed in the “Fabrication” section (above). Assembly requires a welder (electric or torch) capable of welding metal 3/8” thick.
A Power Cube Jig can be very useful during the welding stage:
- Frame
- Gas tank
- Hydraulic tank
- Engine and Hydraulic Motor Mount
- Battery mount
- Oil cooler and fan mounts
- Keyswtich and Choke Brackets
- Solenoid Mounting Bolts
- Throttle and Starter switch mounts
- Quick Attach Plates
- Finish and Painting
- Install Hydraulic Components
- Install Solenoid
- Install Mufflers
- Wiring
- Keyswitch and Choke Installation
- Choke installation
- Throttle
Final touches
- Install engine and secure with bolts, nuts and washers
- Connect wiring to key switch and solenoid
- Connect fuel line
- Connect coupling to engine shaft
- Install hydraulic pump on coupling and secure with nuts & washers
- Install fan and hydraulic oil cooler
See Also
See also Power_Cube_Fabrication_Procedure for older model.
Work in progress by Tom Griffing - File:Powercube.odt
Previous Versions
Power Cube Fabrication June 2011
