A log is used to communicate ongoing activity to other collaborators. See where I am on the Roadmap. See Google Drive for pictures - [1]. See Calendar. See Logs. OSE Hangout. See Work Log for how to set up work log. See Wiki Views and Recent Changes Visual Map. Notes on Time Management. MJ Critical Path. Alec Log. Publicity Spreadsheet - [2]. Key Text. KS.

Sat Jun 2, 2016

What could this project provide that would have an impact in your life? What could this project provide that could have an impact in the world?

Thu Jun 30, 2016

OBI Kickstarter Project Stats. KS Reward Structuring

Is this important or relevant? If it is important, then are people willing to support it? If people are willing to support it, does it have grassroots viral potential? If it has viral potential, what would be sufficient to tap that potential?

First, look at the facts. $1.2M for an average American to secure a home. And, $360k is average price of a new home, riddling the average buyer with debt. Do people care about this? Maybe the fact is people don't, because they are too deep in the system. Do people really care?

If they care, then there is huge market potential to disrupt the status quo.

Maybe people do care, but the system is rigged for some level of foulness. Such as land access. But that does not appear to be the case, as many lots of building land can be bought for cheap in cities. In some sense, there will always be surplus land - as per person acreage is 5 on the planet, and 1 for arable land. Even Doomsday Scenarios of Land Required Per Person predict only half acre arable land per person - which is abundant given that first principle calculations state that only 1/400 of an acre is needed to feed a person with a carbohydrate monoydiet.

A person uses 1 acre of land to feed them, and a Vegetarian uses 1/2 - using current technology. A person requires 1/400 acre on first principles. See First Principle Land Requirements to Feed a Person.

So say there is plenty of land for everyone.

Then by incremental housing, if you could get a small, comfortable 700 sq ft house - loaded with eco-features - designed for expandability - then you would be paying 1/10th the cost of an average new home. Thus - the price of a new car - you have a home. Then instead of getting riddled with debt - you pay that which you would be paying for a mortgage - on expanding your small home. Is this out. Would proposition?

Wed Jun 29, 2016

Key Text. Biofiber Insulation. Tracking Kickstarter Progress.

Tue Jun 28, 2016

Kickstarter Project Description - [3]. Added how to select fixed aspect ratio to GIMP.

Mon Jun 27, 2016

Alec beginning to stake out keylines. KS text + rewards + Contributing. How To Embed FreeCAD Files on the Web. Updated OBI Roadmap

Sat Jun 25, 2016

Doing publicity prep based on OBI Publicity Spreadsheet. Published short version of OBI Press Release. Added suggestion form to OBI SME Advisors. 3 Levels of Hardware Open-Sourcing. [ https://docs.google.com/spreadsheets/d/1-6w4wlklxDGkgle65DAhUlZk4PhgQJhDN9L6aqmPiZQ/edit#gid=0 publicity spreadsheet]

Fri Jun 24, 2016

Doing publicity prep from OBI Publicity Spreadsheet with new OBI Publicity Strategy. Stack Exchange. Biohydraulic Fluid. Mo

Thu Jun 22, 2016

OBI Submission Process. OBI Press Kit.

Tue Jun 20, 2016

OBI Kickstarter Script to video. See OBI Kickstarter Storyboard and OBI Kickstarter Video Graphics. OPEN!. Mailing List - Mailing List Requirements. Kickstarter Rewards.

Mon Jun 20, 2016

OBI Kickstarter Script to video. See OBI Kickstarter Storyboard. Added infographic to Jean-Baptiste Log. Redirected OSE Icons to Icon Source. Kdenlive adding pan and zoom.

Sat Jun 18, 2016

Mumble - open source teleconferencing software. OBI Studio Explosion. PVC Pipe. Phil Rutter visited - heat of the hazelnut plantout.

Sat Jun 11, 2016

Next Tractor built in one day.

Fri Jun 10, 2016

Disassembling last year's prototypes for building Next Tractor. Fellows PR Manual.

Thu Jun 9, 2016

Notes on Heavyweight Product Management. Third day of decapitation.

Wed Jun 7, 2016

Designed Keyline Plowing

Tue Jun 7, 2016

Hazel decapitation. Box Hiller.

Mon Jun 6, 2016

Vivid Vision. Cement Paint. 360 Degree Backhoe. Simultaneous Parallel and Series Operation

Sat Jun 4, 2016

Pictures of Greenhouse and House taken for Kickstarter. See Aquaponics Folder in Google Drive above. 8" Cylinder. Flail Mower added to Nut Plantout Machines.

Fri Jun 3, 2016

On-Demand Pump. 3 Year Vision. The Journal of Open Engineering.

Thu Jun 2, 2016

Cat Johnson. Geoff Lawton Webinar. Open Source Chicken Incubator. Lane Widths. OBI Kickstarter Script#Storyboard. Kdenlive#Scrolling Text. Sickle Bar Mower. User Contributed Designs. Large Number of People Working In Parallel. The Dark Force of OSE.

Wed Jun 1, 2016

NextTractor.

Tue May 31, 2016

Materials Production Facility. Hetzner 2016 Log.

Monday May 30, 2016

OSE Server - securing a 64GB RAM, 1 GB, 500GB-SSD server. Large Format 3D Printer. Joint Venture Template. Adding to Compressed Air Storage - EPRI contact.

Sun May 29, 2016

1/4" Chain. Quarterly Progress Review

Sat May 28, 2016

Nut Plantout Machines - refining the one-pass planting concept, with flailing, keyline, and then planter. If available, we need a 2-tote with 500 gallons of water.

Fri May 27, 2016

Vermeer BP714. To Interlock or Not to Interlock. OSE Server. OBI Kickstarter Script.

Thu May 26, 2016

Press Release finishing, clarifyin assets about Further Information. Open Architecture Collaborative. OBI How it Works. Tractor Construction Set Gallery. Compressed Air Storage.

Tue May 24, 2016

OBI_Kickstarter_Script#v5. Dedicated Server Options. Adding NPTF coupler for a barb connection to Useful 3D Prints. OBI Press Release started and Press Release updated. Living Building Challenge. Founder.

Mon May 23, 2016

Movement Entrepreneurship Curriculum. Invited Walt Pyle to OBI SMEs. Hydrogen Calculations. Faculty House Finishing.

Sun May 22, 2016

18 HP Engine. FreeCAD Tutorial 1. Overshot Water Wheel.

Sat May 21, 2016

Biogas Calculations. Gasifier Butterfly Valve. Foundation Build Procedure.

Fri May 20, 2016

Mainstream Architecture Toolchain.

Thu May 19, 2016

Adding Bottom_Watering_Regulating_Fittings and Hose Barbs to Useful 3D Prints. Adding 3/4" U Barb to Useful 3D Prints. Lost PLA Casting. OBI Studio. TEG Modules

Wed May 18, 2016

Seed Eco-Home Features -> OBI SMEs recruiting -> OBI Publicity - Prior Contacts from all existing publicity at In the News. Kickstarter Strategy. OBI Publicity Log. Ozone vs UV.

Tue May 17, 2016

Michel Dhoore suggested InterPlanetary File System - IPFS. Blockchain Microgrids. Updating Seed Eco-Home Technology and Cost with details on technology used.

Mon May 16, 2016

OBI Kickstarter Script v3. OSE Part Library - Alec added Pivot Plate Library. Grid Defection. Added Drive Sprocket Assembly and Stock Bonding Plate to part library. Added Idler Mount Plate Library. FreeCAD Tutorial 3. Added Idler Clamp Library, Idlers Library, Idler Tensioner Plate Library.

Sat May 14, 2016

Aquaponics Log. Aquaponic Greenhouse Thermal Design. OBI Kickstarter Script#Notes on pure passion. 3D Printer Extrusion Rates. Pellet Extruder. Open Source Extruders. Open Source Medical Imaging.

Fri May 13, 2016

OBI Comparison to Industry Standards. The Politics of Tiny Houses.

Thu May 12, 2016

Legal Compliance in Construction. OBI Comparison to Industry Standards. Kit House. OBI Community Platform. Updated Seed Eco-Home Technology and Cost. OBI Kickstarter Script v2. Amazing 3D by Michel Dhoore - [4]

Wed May 11, 2016

MJ Critical Path updated with Calendar, Task List, and Discussion. Building Code Compliance. CEB Press Log. OSE Part Library - adding Power Cube Library frame - building upon Tubing Library. Universal Rotor Library, Plates, Tracks, Idlers, Drive Sprocket.

Tue May 10, 2016

Arduino Inverter. Continuing Nut Plantout Machines. OBI Kickstarter Product Narrative. Local Lumber Companies. Biofiber Insulation.

Mon May 9, 2016

OBI Kickstarter Reward Structure. Wind Turbine Industry Standards. Silicate Mineral Paint. OBI SME Advisors. 3D Printed Polycarbonate Glazing. Publicity Venues List. Superlearning. Open Source Architecture.

Sun May 8, 2016

Cameron Herold Log. College.

Sat May 7, 2016

FeF Site Plan - added topsoil cover data. Working Slide 2-3 of Nut Plantout Machines. Deka-kW VAWT Wind Turbine. Habits of Productive People. 3/4" Irrigation Pipe

Arduino Hydraulic Pump

Fri May 6, 2016

OBI Kickstarter Strategy, OBI Kickstarter Script#Review Strategy. Production Rates. Open Source Chicken.

Thu May 5, 2016

OBI Kickstarter Script. DIY Pellet Burner. PEX Pipe. 50 kW Wind Turbine.

Wed May 4, 2016

OBI Kickstarter Script. Seed Home Development - Seed Home Workshop Preparation Process. OSE Review Platform.

Tue May 4, 2016

Cameron Herold meeting on how to grow 100% every year. OBI Kickstarter Script.

Mon May 2, 2016

Nut Plantout Machines. OBI Kickstarter Script. Housing Shortage. Owner Builders. VAWT. Organizational Development Log. OBI Kickstarter Script. 3 Year Painted Picture. Open Source Bagging Machine. Small Scale Lime Production. DC Motors.

Sun May 1, 2016

Character and Personality Assessment. Jonthan's Open Health. Open Source Coffee Roaster. 3D Printing Courses.

Sat Apr 30, 2016

Biogas Digester. OBI Kickstarter Script. Cost of PV is Falling Exponentially.

Fri Apr 29, 2016

Oxyfuel Torch. Roof Steel. OBI Kickstarter Script. Elemental. Fellowships and Awards. Docubricks. Open Science Framework. Paver Sealing.

Thu Apr 28, 2016

MJ Critical Path. Open Source MRI. Lime Burning. OBI Kickstarter Script. Updated MicroHouse 4 documentation preparing for the OBI Kickstarter. US Wind Power Potential. 2kW Wind Turbine. Grid Intertie Inverter.

Wed Apr 27, 2016

OBI Kickstarter Script. Open Source Photo Sharing Site Specification. Open Source Peltier Refrigerator. Thermoelectric Generator. Energy Recovery Time.

Tue Apr 26, 2016

Embodied Energy of Stabilized CEB

Mon Apr 25, 2016

Mon Apr 25 2016 Notes. DIY Bearings from Bearing Balls. Nut Plantout Machines. OBI Kickstarter Script. Hemp. Nut Plantout Machines. First FreeCAD part library addition - Part Library - for tubing - see FreeCAD Stock Tubing.

Sun April 24, 2016

OBI Kickstarter Research Questions. Finished the bottom watering - 16 shelves from 6 PM to 9 am. Sun was beginning to fry the hazelnut plants.

Sat Apr 23, 2016

OBI. Assembly Workbench Tutorial. Window Resize Shortcut in Ubuntu.

Fri Apr 22, 2016

Assembly Workbench Tutorial. Reviewing FreeCAD Assembly 2 Workbench Tutorials. Installing QT 5.3 on Ubuntu. DXF Importer Install for FreeCAD. Teigha File Converter.

Thu Apr 21, 2016

How to Build a 100 Ton Press for $35. Peak Performance. Assembly Workbench Tutorial. Dorkmo Log pumping out the Incubator design.

Wed Apr 21, 2016

Kdenlive. Sketcher Tutorial.

Tue Apr 20, 2016

Do Not Do This. USB Microscope. Curriculum. Aquaponic Greenhouse Planting. Cursor Highlight in Ubuntu. Screencasting.

Mon Apr 19, 2016

GVCS Dashboard. Auto Bed Leveling.

Sun Apr 17, 2016

Hydrogen Generation. Priorities. How to Design a Product.

Sat Apr 16, 2016

OSE Wiki updated for documentation uploads. 3D Printed Cordless Drill.

Fri Apr 15, 2016

Continuing Greenhouse Nursery Module for install. Fasteners Workbench in FreeCAD. OBI Product Release Schedule.

Thu Apr 14, 2016

Lithium Ion Battery Recycling. Continuing Greenhouse Nursery Module. Updated OSE Chapters. Status Log. Post Scarcity Escape Velocity.

Wed Apr 13, 2016

Wed Apr 13 Notes. Continuing Greenhouse Nursery Module for automated watering - getting to the BOM today to source parts by tonight. Refiled General Liability Insurance for OSE and added it to Corporate Calendar. Open Source Hydraulic Solenoid. 3D Printed Stepper Motor. 3D Printed Solenoid Motor. How a Washer Solenoid Works. OSVehicle. Collaboration Infrastructure. Chapter Notes.

Tue Apr 12, 2016

Azolla and Duckweed Calculations. Shelf Mounting Procedure.

Mon Apr 11, 2016

Mon Apr 11, 2016 Notes. Priorities.

Sun Apr 10, 2016

Doing D3D Prototype 2 with outer enclosure - 3D Printer Design Evolution. Open Source Hub Motor. Got conceptual design and technical to 80%, no CAD yet.

Thu Apr 6, 2016

Finishing FreeCAD Sketcher Workbench Tutorial. Part Workbench Notes.

Wed Apr 5, 2016

Product Kits.

Tue Apr 5, 2016

Distributive Enterprise List. Added Success Metrics to Distributive Enterprise page. Nut Breeding - adding 3D printed water fittings and designing frame for v2 of 3D Printer Design Evolution - the version with a frame. FreeCAD Sketcher Workbench Tutorial. Resizing Windows in Ubuntu. FreeCAD Part Design Workbench Tutorial. FreeCAD Assembly 2 Workbench Tutorial. List of CAD Programs updated. FreeCAD Exploded Part Animations Workbench Tutorial. Open Source CNC Hot Wire Cutter. Open Source CNC Communities. Clinton Sam. FreeCAD for 3D Printing.

Mon Apr 4, 2016

Automatic Bed Leveling. Oraganizational Log updated for heavyweight product management and recruiting. 3D Printer Design Evolution. Updated 3D Printer Roadmap. Defining Project Checklist for key elements of project management. Lulzbot Toolchain. Volunteer Test.

Sun Apr 3, 2016

Sun Apr 3, 2016 Notes. Cold Hardy Fruit Trees. Gages.

Sat Apr 2, 2016

Finishing nut shelves in greenhouse. Matyáš Škvor meeting on Infobox Template. Ball WebGL. Updated OSE Wiki.

Fri Apr 1, 2016

Truck Bed Hoist. Open Source Drone Projects. Open Source House Projects. CNC Projects. Robotic Arm Projects.

Thu Mar 31, 2016

Pee and Poo.

Wed Mar 30, 2016

Regan Arts negotiation. Talking to Ben Kellogg about Kickstarter publicity. Making nursery shelves for 10000 nuts.

Tue Mar 29, 2016

How to Make STLs for 3D Printing - by combining existing, and generating new ones. Updated instructions for the Sketcher Script . Water Fittings STLs added to Useful 3D Print Files. Session with Wevolver to post the Tractor online.

Mon Mar 28, 2016

OBI Publicity. Greenhouse Nursery Module. Swing Blade Sawmill.

Sun Mar 27, 2016

Sun Mar 27, 2016 Notes

Sat Mar 26, 2016

Sat Mar 26, 2016 Notes. Continuing Greenhouse Nursery Module - pumping determined, general plumbing determined, going into overflow details + 3D printed parts, plus control panel. Stack Exchange Alternatives.

Fri Mar 25, 2016

Heavyweight Product Management. How Nonprogrammers Can Contribute to Open Source Projects. https://opensource.com/life/15/12/5-favorite-3d-printing-projects-2015. Browser cad - http://hackaday.com/2015/09/03/learn-3d-modeling-in-your-browser/. On Lulzbot success - tool chain - https://opensource.com/business/15/11/open-ethos-powers-lulzbots-success. Opensource.com yearbook - https://opensource.com/yearbook/2015. Filabot on appropedia. 3D printer construction set in FreeCAD under FreeCAD news. Steam engine in FreeCAD.. Work with BlocksCAD on Tractor Construction Set Library.

Thu Mar 24, 2016

OSE Wiki - adding navigation map. Moving towards a unified structure. Shelving design + auto watering controls at Greenhouse Nursery Module. Financial Goals.

Wed Mar 23, 2016

3D Printer Calculations. Designing shelves for 12,000 seedlings with bottom watering at Greenhouse Nursery Module, linked from Aquaponic Greenhouse Workshop. Updated Aquaponic Greenhouse Log. Tree Planter. Contours, Keylines, Swales, and Berms. Continuous Charcoal Maker.

Tue Mar 22, 2016

EIR - contract added for Alec. Updated Burndown Graph Protocol. Edited 3D Printer Workshop Survey from Torbjorn's initial cut.

Mon Mar 21, 2016

Sketcher Workbench. Operations Manual Template.

Sun Mar 20, 2014

OSE Wiki Information Architecture for Collaborative Ecology. OSE Priorities March 20, 2016.

Fri Mar 18, 2016

Prusa i3 Build Optimization - quality control procedures checklists are being drawn up. Combination Square. QC Checklist - 3D Printer

Thu Mar 17, 2016

D3D Product Testing - testing automatic bed leveling. Probing works. Z offset needs adjustment.

Wed Mar 16, 2016

D3D Live ISO updated, finally works. Results are excellent: system is much faster than normal because it's lean (500MB) and operates from RAM when selected for this option, about 3/4 GB needed. F12 selects boot options on Dell Precision M6500. Moving on to Automatic Bed Leveling. Updated Dogs Log.

Tue Mar 15, 2016

Open Source Nursery. Updated OSE Fellows. Replication updated to Peru. MicroHouse WebGL. Open Source Photogrammetry.

Mon Mar 14, 2016

Development Log started to document major trends in development direction.

Sat Mar 12, 2016

Jonathan Prusa i3 Build. Open Source Walk-in Cooler.

Fri Mar 11, 2016

Drones. EIR Review Process. Created D3D Product Testing to test the live linux with the software. Design Sprint March 11, 2016 Working Doc. Online CAD Part Repositories.

Wed Mar 9, 2016

OSE EIR Basic Financial Model. Continuing Nut Breeding with nursery design. Distributive Enterprise Webinar. Adding to Publicity Resources. Hours. Startup Farm Data.

Tue Mar 8, 2016

Small Apollo Program for the GVCS. Map of OSE Efforts. Mapping Open Source Hardware Collaboration Ecologies. Lean.

Mon Mar 7, 2016

Announced Collaborative Literacy Webinar. Updated OSE Africa Guidelines.

Sat Mar 5, 2016

BOM Template - added supply chain strategy. Going over Script 7 of Prusa i3 Modular Build Video. Potato data point - 3/4 lb/sf - Potatoes. Live Linux. Added Entrepreneur_in_Residence#Selection_Criteria + Distributive Enterprise Brief Template. Added OSE SME Webinar

Thu Mar 3, 2016

Local Newspapers Strategy. 3D Printer Marketing Log. Greenhouse Nursery Module. Cloud Collaborative Embeddable Linkable Word Cloud Generator. Greenhouse Nursery Module.

Wed Mar 2, 2016

List of Open Source Hardware Projects. Cultural Creation Strategy. 3D Prototyping Services. Press Release Template and 3D Printer Press Release. OSE Local Press Contacts. OSE Africa Guidelines.

Tue Mar 1, 2016

Wevolver - setting up with Rich Hulskes. OSE Wiki Structure Specification. OSE Community Platform. Hydraulics 101. Crowd Funding. Open Source EDM. How to Design a Regulated Power Supply

Mon Feb 29, 2016

3D_Printer_Build Workshops Survey + D3D Feasibility Survey. Getting detailed at Analysis of Industry Standards Protocol for Workshops and publishing for community feedback at 3D Printer Workshop Community Survey. Plant Nutrient Deficiencies. Tractor Production Industry Standards. Lists of Publicity Venues. Google Hangout updated with Hangout on Air. Collaborative Literacy Webinar. Edumarketing. Small Enterprise.

Sun Feb 28, 2016

Useful 3D Prints. Rapid Prototyping Tasks. List of Open Hardware Groups.

Sat Feb 27, 2016

D3D Business Plan. Updated Business Plan Template. Car Manufacturing Ergonomics of Production. Regarding distributive enterprise - Tiers of Enterprise. D3D Certification.

Fri Feb 26, 2016

Marketing Strategy. Background Research. Opens. Adding potential teachers to SMEs. Prusa i3 Modular Build Video. Linux Admin 101. Viral Replicability Criteria - added milestones. Egg CSA.

Thu Feb 25, 2016

Chicken Breeding Enterprise Model. Aquaponics SMEs. TRIZ. Peltier Stove.

Wed Feb 24, 2016

Talked to Judith Regan's company regarding a book. GVCS Burndown Graph. Burndown Graph Protocol. Lettuce.

Mon Feb 22, 2016

Design Sprints and Collaborative Literacy Webinar announcement posted. Hangouts On Air.

Sun Feb 21, 2016

Time to Reach $1B Revenue.

Sat Feb 20, 2016

Finishing promo video using 3D_Printer_Workshop_Script. Articulated Arm Module. 3D Metal Printer. Large Format 3D Printer. Updating Ubuntu 14.04 to 15.04. OpenDroneMap. 3D Printer Workshop Announcement Draft.

Fri Feb 19, 2016

3D_Printer_Workshop_Script final and publishing vid. Replicable Enterprise. PowToon - added Recommended Workflow for Explainer Videos. Stucco Tutorial. DIY Lulzbot Mini.

Thu Feb 18, 2016

Alec is working on the 3D Printer Open Source Supply Chain. Started D3D Distributive Enterprise. Chickens

Wed Feb 17, 2016

Collaborative Literacy#OSE Development Best Practices. Updated EIR. Ubuntu Notes. Finally the 3D_Printer_Workshop_Script after determining that build time is 3.5 hours for module build and assembly, minus material layout and calibration. Prusa i3 Modular Build Video.

Tue Feb 16, 2016

Downloads Page. Added to Economic Time Binding, EIR, and Open Source Economy pages. OSE Campus Replication. Ultra Low Cost Housing. Prusa i3 Build Optimization.

Mon Feb 15, 2016

Continuing Prusa i3 Build Optimization. ProjectLibre. D3D_Product_Strategy

Sun Feb 14, 2016

EIR Selection Assessment. Prusa i3 Build Optimization.

Sat Feb 13, 2016

Definition of Ready for Media. Prusa i3 Build Optimization. Updated Open_Source_Ecology:Copyright to 4.0 International.

Fri Feb 12, 2016

Back from nut trip at Badgersett, our second expedition there. D3D Product Strategy. 3D3 Live Linux USB. Nut_Breeding#Perennial_Polyculture_Plantout.

Mon Feb 8, 2016

D3D Risk Assessment. BOM Template protocol completed. Reworking Worskshop Organization template at d3d - [5]. Replicable CSA consistent with 20 year OSE Roadmap. Eggmobile. Bale Spreader.

Mon Feb 8, 2016

D3D Risk Assessment. BOM Template protocol completed. Reworking Worskshop Organization template at d3d - [6]. Replicable CSA consistent with 20 year OSE Roadmap. Eggmobile. Bale Spreader.

Sun Feb 7, 2016

Cool Cars.

Sat Feb 6, 2016

Difference Between Price and Cost. Subterranean Heating And Cooling System.

Fri Feb 5, 2016

Prusa i3 Build - software and firmware + Folgertech_Kit#Test_Workflow. Pronterface. Live USB Linux

Thu Feb 4, 2016

Ag planning with Alec, Andre, Jonathan - Agriculture Spreadsheet 2016. Compost Chicken System. Prusa i3 Build.

Wed Feb 3, 2016

Swing Blade Sawmill. High Temperature Pipe Joints. Infobox Template. Replicable CSA.

Tue Feb 2, 2016

FreeCAD Scripts in - adding to Sketcher Script in the Presentation on top of FreeCAD Scripts.

Mon Feb 1, 2016

Distributive Enterprise Collaboration Architecture Priorities. Basic Income. Y Combinator. Documentation Rationale. Prusa i3 Build - quality control process. Top 3D Print List. Part Library - added primitives, such as 2020 extrusion for FreeCAD. Precision. Chicken Market Research. Bread Market Research. XM Prusa i3 Procedure.

Sun Jan 31, 2016

3D Printed Drill. 3D Printed Laser Cutter. Large Format 3D Printer. Open Source Airplane.

Sat Jan 30, 2016

Prusa i3 Build.

Thu Jan 28, 2016

Marcin Critical Path 2016. FreeCAD Scripts - imports section reworked for Sketchup (DAE) to FreeCAD. Garden Tractor. FreeCAD SMEs. Work Breakdown Structure. Depth of Modularity - important concept derived from my interpretation of From Manufacturing to Design (in the OSPD seminal literature section). Rotary Hydraulic Encoders. Parallel and Series Valves. Hydraulics SMEs. 3D Printed Part Library.

Wed Jan 27, 2016

Hempcrete. Publicity Strategy. Moving from Open Source Product Development Method Roadmap to 2016 Critical Path and Enterprise Information Architecture. Zoogleal Mass. Moved Koruza CNC Torch Table Development out of CNC Torch Table Development. Santa Fe Institute keeps popping up. Updated OSPD and Concurrent Design.

Tue Jan 26, 2016

FreeCAD Crash Course. Tractor Construction Set video - in our Collaborative Literacy training videos. Open Source Product Development Method Roadmap. Mark Horner. Enterprise Development#Resources. Jonathan's Organizational_Core_Training

Mon Jan 24, 2016

Lime Cycle. Ricardo Pfeiffer is a applying to do a Master's Thesis on the CEB Press.

Sun Jan 23, 2016

Added video to Bulldozer. Hazelnut Development. Chicken Proposal. Track Idlers.

Sat Jan 22, 2016

3D Printer Log started as Jonathan joins team. Based on Roadmap#Agriculture_Equipment_Construction_Set_Roadmap, moving forward with porting all libraries to FreeCAD format. Fertilized Chicken Eggs.

Fri Jan 22, 2016

Continuing Roadmaps. Shift to rotor implements and hay implements for agriculture, along with getting a robust tractor for a market garden. Gotu Kola. Roller Mill.

Thu Jan 21, 2016

Agriculture Log. Zoogleal Mass. Cackle's Red Broiler. Updated Design Sprints.

Wed Jan 20, 2016

Tilapia#Tilapia Food. 3D Printer Distributive Enterprise Log. Guest Cabin Budget. Laser Diode. Roadmap#3D_Printer_Roadmap. Oxyhydrogen Generator Development. Dump Trailer Development. Oxy-Fuel Cutting. Torch Cutting Industry Standards. Filament Extruder Development.

Tue Jan 19, 2016

Milestones#Narrative. 2016-2017 Milestones. D3D Development. Prusa i3 Development.

Mon Jan 18, 2016

OBI Critical Path. Milestones. Global Issues - nice reading list and global geopolitics figures, such as $1.7T global military spending. OSE Partnership with OBI.

Sat Jan 16, 2016

Robust Economics. Continuing Critical Path and Milestones. 3D Printed Multiwall Greenhouse Glazing. Ceramic Printing WASP Extruder. 3D Printing Filament Extruder. Modular Housing. Plastic Pellet Prices.

Thu Jan 14, 2016

Shifting to revisit mission, vision, assumptions, model of change, critical path, OSPD platform basics, documentation basics. Potentially a paper on OSPD. Priorities, scope and sequencing. Extreme Development principles. Viral replicability criteria. Phasing. Budget. Bootstrapping approach. Resoirce allocation clarity - how much to enterprise, how much to platform, and how much to hands-on, once again with stacking of functions approach. Absolute clarity on this, with brevity, no mincing of words. Famous quotes, up to '10 billion per week habit.' A white paper that can be published. Referencing OSAT, OSPD, open Labs, etc. OSPD PH. D. student, from MIT or equivalent. Approach is to stack functions at all times around core work. This means Ph.D. would be an ancillary proposal to on-ground Enterprise development. Direct Burial Cable. OSE Roadmap. HOW TO USE THIS TEMPLATE:

Name your new product version correctly: Product designation followed by "_v" followed by the last two digits of the current year followed by .two digits indicating current month.

Name example: Steam engine_v21.05

where "21" indicates the year 2021 and "05" indicates the month of May.

1. To create your product version page, enter its name (according to the format described above) in the search bar in the top right corner and press enter or click the search icon.

2. On the results-page, click the link found within the sentence Create the page "Product Designation_vYY.MM" on this wiki!

3. Go back to this template and Press Edit.

4. Copy the contents.

5. Go back to your product version page.

6. Paste the template contents into your product version page.

Now you can start adding contents. If appropriate, headings provided in this template can be modified, deleted or replaced.

This line and those above shall be deleted after you have implemented this template for a new development page.

Overview

For other versions of this product, see the Product page: [Insert link to the product page here. This template can be used for product pages: Template:Product]

Replace this text with a brief description of the product version. Feel free to include a picture (see Wiki instructions to learn how to upload files).

Status

This project is in stage 1 of 5; Design.

1. Design

2. Planning

3. Prototype

4. Almost done

5. Full Release

Replications

No replications so far.

The following format can be used to reference a replication:

[Start date YYYY-MM-DD, Location, Product version, Link to a page showing some documentation of the replication process or results]

Documentation

Replace this text with a DevTemplate. A DevTemplate is a table linking to the necessary documentation for the product version. It can be created in two ways:

embedded as a Google sheet, see Development_Spreadsheet_Template or

insterted as a Wiki-based table, see Template:Devtemplate.

Product ecology

The product ecology shown below is from the Power Cube page and merely serves as an example. Each product has its own context in the product ecology. Delete this text and modify the internal links in the product ecology table below so that this product ecology section is appropriate for the product/version you are describing.

Product Ecology
**Power Cube**
From	Uses	Creates	Enables
Gasoline Biodiesel Steam Engine Steam Generator Gasifier Burner Pelletizer Components Frame Engine Coupler Metal Hydraulic Tank Gas Tank Hydraulic Pump Hydraulic Hoses	Biofuel Biomass Tractor QA Plate	Power Hydraulic	Tractor CEB Press Bulldozer Microtractor Car Truck Chipper Hammermill Drill Press Multimachine Welder Ironworker Sawmill Induction Furnace CNC Torch Table

Planning

No concrete plan so far (consider using Scrumy or a Critical path.)

Details

Replace this text with more detailed information about the product.

Working principle

Replace this text with a clear description of the product's working principle.

Safety considerations

Replace this text by listing safety considerations.

BOM

Replace this text with a BOM (Bill of Materials). To learn how to make a BOM, see How_to_Make_a_BOM.

CAD

Replace this text with a Part Library. Go to Part_Library_Template to see what a Part Library should look like.

Bugs

No bugs identified yet.

Communications

See the Discussion tab for general communication regarding this product version.

Meeting logs

Replace this text with internal links to OSE wiki pages for meeting logs related to this version of the product.

Active team members

See the meeting log for active team members.

External links

Insert external links here.. Communities of Practice. Note Open Source Product Development, Documentation Standards and Template:Milestones, and Template:Development should be refactored.

Wed Jan 13, 2016

Principles of Extreme Development. Chinese Greenhouses. Elements - burndown list, critical path, task allocation strategy, financial sustainability. Rodmap, priorities, distributive enterprise goals, following Principles of Extreme Development. Cannot cut corners on OSPD Process. Must reconcile with critical path, scrummy, micro task burndown. Bio Oils.2x6 Lumber.

Tue Jan 12, 2016

OBI Critical Path. OBI Infographic. OSE Wiki Managemement

Mon Jan 11, 2016

D3D Enterprise Logic Model. Rotating Lead Screw Nut.

Sun Jan 10, 2016

Yesterday worked on plumbing in Faculty House, and winterized Hablab for the coldest day of the season, 1 degree F last night. Today to finish Plumbing in Faculty House.

Fri Jan 8, 2016

Platform Design Integration. Integration. Tractor Design Workbench Specification. OSE Wiki Standards. Module Sidebar Template

Thu Jan 7, 2016

Open Building Institute Foundational Document. FeF Faculty Campus Development. FeF Infrastructure Improvement 2016. D3D Team Charter. Tractor Design Workbench Specification.

Wed Jan 6, 2016

2016 Agriculture. Open Building Institute Foundational Document.

Tue Jan 5, 2016

Moderator Requirements. Jonathan's Forums Budget. Jean-Baptiste's Icons Development Video. Forum can up-vote on the icons. Joshua's Collaborative Video Protocol. BOM review includes a crowd source of alternative parts based on an existing spreadsheet, with line reference to an item and source. This could nail sourcing. BOM is simply published and referred to on Bug Tracker and Development thread, for acceptance by Commit Manager, with commit history documented. Governance identifies who commit manager is. It's a person working on a different project with the same skill set. Forum is searchable by common topics, with headings of posts that are consistent. BOM review - instructions are 1. Assess part choice for cost, performance, availability, delivery time, and location of source - for different country locations. Set up and fork for different locations. Set up such forking space for other people - such as simply copy and paste a template. Use well annotated, well-structured template. Alec EIR Blog Post. Dev Cycle - benchmarking. Assess competitor's specifications for accuracy, speed, power, and all available parameters. Replicate or exceed these. Development Assumptions. GVCS Modules. Wikipedia Concept Validation. Encyclopedia of Mechanisms Concept Validation. Design Rationale. OBI Theory of Change. Dhanada Mishra - to produce a Chapters template for wiki. Form around the concept of Distributive Enterprise - resonates with him as in Orissa, poorest region of India. Power Electronics Construction Set. Tractor Design Workbench Specification. Module Development Narrative.

Mon Jan 4, 2016

Module Development Narrative. Started Tractor_Design_Workbench_Specification. D3D Development. Sweden Visa. CNC Inspiration. Open Building Institute Foundational Document.

Sat Jan 2, 2016

OpenJSCAD has drag and drop. Bryan Bishop discussion on open CAD. History of NURBS. Torbjorn EIR Agreement and Work Plan. Open Source Electric Car.

Fri Jan 1, 2016

Analysis of Industry Standards (for viral replicability) - build time and working BOM. D3D Development. D3D Value Proposition. OSE Model of Change. Tractor Design Workbench Specification. FreeCAD - updating that main need is documentation.

Thu Dec 31, 2015

OSPD and FreeCAD, STLs for 3DP, reverse engineering from design drawings, CAE for structures. Drag and drop parts, macros, python scripts, python 101, github 101, Tractor Workbench. 100 primktives for any heavy machine. CNC Torch for building any machine. CNC Torch/Router table. Skin at the end from large-scale 3D Printer. 3 executables per day. Script. Specification. Work Order. Review Problem. Analysis of Industry Standard Design. OSE Distillations Webcast. OSE Distillations Webcast Template. Zero waste collaboration, open source economy, mass creation of right livelihood, and Distributive Enterprise. Linux from Scratch. OSE Linux. FreeCAD developer's guide. FreeCAD toolpath module. Integrations. FreeCAD toolpath and LinuxCNC extension in FreeCAD as the industry standard for CAM. Executables: Tractor Design Workbench Specification. CAM specification. Approach: publishing for a specific audience. Work Order: FreeCAD instructionals, a few key ones, with constant talk over a display. Do the best on display, and make it comprehensive. Recruit several existing people to do this. Actionability test: is the result a build, and is the process mass-scalable with unlimited scalability? Outernet, OSE minimum FreeNux with FreeCAD and Tractor Design engine. Limit: viral participation. First 6 mos of 2016: deploy TCS, including rapid builds, then deploy Precision Machining. Theme of OBI is machine exploration, and biogas systems. Script: Tractor Design Engine - program and vision. FreeCAD SweetHome Blender OpenSCAD Natron Kdenlive. OSE Specification Score. Ecology: icon-wiki template-semantic Mediawiki extension-forum discussion-freecad embed template-spreadsheet template from wiki Template with argument being the unique Module development, so list of accepted modules must be used. Animated GIF. FreeCAD - added FreeCAD#Contributors.5 Open Source Software Business Models. OSE Bug Tracker Requirements. Difference Between a Specification and a Requirement.

Wed Dec 30, 2015

Module Development Narrative

Tue Dec 28, 2015

OSE Team Charter. Wiki Best Practices. Priorities. OSE Wiki Templates. FreeCAD Scripts. Open Source CAD Programs. Best Practices. Nexus 6 Case

Mon Dec 28, 2015

Added to List of OSE Requirements. Beginning Tractor Design Guide. Workshop Readiness Assessment.

Sun Dec 27, 2015

Added List of OSE Requirements to Requirements. To Do List - discusses distinction between informal tasks that require no background, and ones that require knowledge of OSE design principles. Study of Organizational Best Practices.

Fri Dec 25, 2015

OSE Collaborative Literacy.

Thu Dec 24, 2015

OSE Forum. Fixing a Broken PVC Pipe.

Wed Dec 23, 2015

OSE Orientation for OSE Chapters. Meeting with Andrea Log regarding OSE France. Possible Template for Documentation, Torbjorn - [7]. Appropedia template - [8].J1 Visas for OSE. Proprietary BigRep. Gigabot. 3DP Unlimited. Modular Desktop CNC

Tue Dec 22, 2015

Added to Torbjorn Log.

Sun Dec 20, 2015

Energy Use by Sector.

Sat Dec 19, 2015

Electrical BOM for Faculty House.

Fri Dec 18, 2015

D3D Requirements. Read Getting the Love You Want

Thu Dec 17, 2015

Open Source Hydronic Stove - first run. 150F achieved in 1/2 hour from 32F. No blower installed.

Wed Dec 16, 2015

3D Printer Filament. Open Source Filament Extruders.

Tue Dec 15, 2015

Recruiting Strategy. 3D Metal Printing.

Mon Dec 14, 2015

CEB Press Future Work added to CEB Press Roadmap. Large scale 3D printing - Large_Scale_Fused_Pellet_Fabrication. Installing chimney and stove. Adding notes on how we used Sweet Home for the Aquaponic Greenhouse Build - at Sweet Home 3D, and finally writing Sweet Home 3D Article. The

Sun Dec 13, 2015

HR Team. Net Pots

Sat Dec 12, 2015

Install of stove. 2 Part Floor Epoxy

Thu Dec 10, 2015

CEB Press Strategy.

Wed Dec 9, 2015

Extreme Collaboration. Shopping and starting heat exchanger build. Replication - Peru case.

Tue Dec 8, 2015

Reconciling finishing doc with finishing of hydronic stove and reconciling Heat Exchanger Development calculations. Galvanized Pipe in a Stove. Set up MicroHouse 4 Development.

Mon Dec 7, 2015

Reconciling finishing doc with finishing of hydronic stove.

Sun Dec 6, 2015

The Meme Hustler - powerful article on how language is shifting and thereby creating challenges for self-determination. Clarifying Strategy to include main platform points. Finishing Open Source Hydronic Wood Stove - hydronic control panel + integration with Faculty House. Develop Open Source Entrepreneurship Training. Karol Apro - Secrets of 5 Axis Machining

Sat Dec 5, 2015

OSE and Lifestyle Script. Finishing Open Source Hydronic Wood Stove - hydronic control panel + integration with Faculty House. 3D House Printer.

Thu Dec 3, 2015

Bulldozer - with Bulldozer Review by Mobin. Finishing Open Source Hydronic Wood Stove - hydronic control panel + integration with Faculty House.

Wed Dec 2, 2015

Aquaponic_Greenhouse_Financial_Analysis. Openmaking. On Imago Theory - Getting the Love You Want. R

Tue Dec 1, 2015

Added to News Feed - discussion with Ben Kellogg. Added to In the News.

Mon Nov 30, 2015

Finishing Open Source Hydronic Wood Stove design. Roadmap Proof of Concept Strategy. Expanded Metal Mesh

Sun Nov 29, 2015

Capacitive Height Sensor.

Sat Nov 28, 2015

Continuing Open Source Hydronic Stove with goal of finanlizing design and build procedure. Hydraulic Hose Protector. Thermowell. Minaral Wool , Rock Wool, and Fiberglass. Ceramic Fiber Insulation. Reviewed Leopold Kohr's Breakdown of Nations.

Fri Nov 27, 2015

Open Source Hydronic Stove building on Open Source Hydronics. PEX Tubing. Metamaps. Stock Photos. PhD Theses on Open Hardware.

Thu Nov 26, 2015

Faculty House Development - Finishing Doc under Conceptual Design. Settling on Technical Dev, Process Mgmt, Collaboration that includes the outside world and pulling in resources from the outside world as a key aspect of a collaboratively-literate distributive enterprise; and Enterprise layers of the Development Template. Took Master Development Steps out of Development Template. Kiersey Temperament Sorter II.

Wed Nov 25, 2015

Wiki Templates. Team Levels - metric of team maturity for prioritizing OSE efforts. CEB Press Future Work. OSE Development Process in a nutshell. What Do You Say After You Say Hello. Please Understand Me. I'm Ok You're Ok. Open Source Hydronic Wood Stove. FreeCAD Tutorials.

Tue Nov 24, 2015

OSE Advisors. OSE Design Guide and Roadmap.

Mon Nov 23, 2015

Degeneracy. Development Template - process view. OSE Microcar.

Sun Nov 22, 2015

3D Printer Companies. Space Frame Vehicles. Showerloop.

Fri + Sat Nov 20, 21, 2015

Roadmap. Cut firewood. Tim Gravlin pre-Thanksgiving visit. Open Source Product Development.

Thu Nov 19, 2015

YouTube Upload Encoding

Wed Nov 18, 2015

Roadmap.

Tue Nov 17, 2015

Roadmap continued. Documented G-Towers. Started Aquaponic Greenhouse Workshop.

Mon Nov 16, 2015

Open Technology Alliance. Swirl Filter. Tetra Pump. Greenhouse Log. Continuing on Roadmap with 3 year technical rollout up to the beginning of induction furnace and engine production. Open Source Rabbitry. Open Source Hydronic Wood Stove.

Fri Nov 13, 2015

Eighty five equals three point five billion. This is a troubling equation - representing that 85 of the world's richest people own as much wealth as the 3.5 billion of the world's poorest.

The potential of the open economic development paradigm lies in addressing this equation. The opportunity is the next trillion dollar economy, the open source economy.

What would it mean to bring about the open source economy? From the Open Source Ecology perspective, it would mean that any individual has an authentic choice to participate in one of two forms of economies. The first is the current system, based on centralization and monopoly capitalism. In this system, the general pattern involves that a certain company is pumped up by investors - sometimes based on merit for making human lives better. The [Genuine Progress Indicator https://en.wikipedia.org/wiki/Genuine_progress_indicator] - a measure that includes the distribution of wealth - implies that most companies today are not based on such merit: as GDP grows, the GPI is stagnant. The difference between these curves may be considered as concentration of power and waste.

The second is an economy based on open enterprise - open organizations, collaboration in product development - and in general, access to economic power without competitive waste.

Open Source Ecology is promoting the Distributive Enterprise concept. Distributive Enterprise revolves around the concept of time binding from general semantics - the characteristically human activity of transmitting experience from one generation to another. This ability of future generations to build upon the sum of human knowledge - facilitated by access to information - can be used to create a new economic pattern in society. This pattern - which we call economic time-binding, or Distributive Enterprise - revolves around the concept of enterprises sharing their business models, operations plans, and the myriad of other processes that combine to a successful business.

We are working on three distinct areas of open source information. First, we produce open source blueprints for industrial machines to create an open source industrial system. Second, we are open-sourcing our business models for how we produce these machines. Third, we are producing open organizational models for how successful enterprises engaging in such production can be run. We believe deeply that true sharing has to happen on the economic playing field, and that distributive enterprise is a way to a collaborative economy.

Tue Nov 10, 2015

Water Elf. Aquaponics IoT. Greenhouse Systems

Mon Nov 9, 2015

Starting Plants. Water Elf. Shopping List:

Gutters

[21] angle brackets - 70 cents - http://www.menards.com/main/p-1444421180570-c-12645.htm?tid=-7294823965202578547
[14] 4" gutter - http://www.menards.com/main/p-1444437112311-c-12506.htm?tid=5462091851190617658

Towers

[30] 4" drainage pipe, ASTM D 2729 - https://www.menards.com/main/p-1444438058058-c-8572.htm?tid=1452432022915588157
[1] heat gun - $20 - http://www.menards.com/main/p-1444445994871-c-8076.htm?tid=-7556989890198252377
[4] Mexican coke bottles
[1] box of 14 screw hooks - http://www.menards.com/main/p-1444439870518-c-9707.htm?tid=-6600405881555057269

Fish Catcher

[12] 3/4" PVC pipe, 10'
[3] 10 packs of 3/4" PVC tees - http://www.menards.com/main/p-1444449167617.htm
[4] 10 packs of 3/4" PVC elbows - http://www.menards.com/main/p-1444449171853-c-9384.htm?tid=2389758809993831773
[8] 3/4" caps - http://www.menards.com/main/p-1444449177939-c-9384.htm?tid=2389758809993831773
[1] bag of 50 - 7" cable ties - http://www.menards.com/main/p-1444444979897-c-6443.htm?tid=6523536576071132604
[2] rolls of 25' of 3' wide plastic poultry netting - http://www.menards.com/main/p-1444451731659-c-5770.htm?tid=2003492455989451555

Mushrooms

[7] 5 gallon buckets
[2] barley or wheat berries

Chickens

[3] 2x4 x 8 ft (treated cedartone - same dark lumber we used for the greenhouse walls)
[5] 2x4 x 8 ft (standard lumber)
[11] 2x4 x 7 ft (standard lumber)
[1] 1x12 x 8 ft (standard lumber)
[1] roll - 4 ft x 50 ft galvanized hex netting (chicken wire)
[1] 1 QT can - Minwax, water-based,"Early American" wood stain

Other

[2] bottles of expanding foam

Home Depot

http://www.homedepot.com/p/HDX-3-ft-x-50-ft-14-Gauge-Green-PVC-Coated-Welded-Wire-308351HD/204331901

Sat Nov 7, 2015

Master Repo - [9]
Icebreaker
Today:

Roof - folder- instructional and Greenhouse_Roof_Cheatsheet.
Ledge- finish - [3] 2x6, [7] 2x10s
Triangle sections

Finishing:

Caulk Seams
Paint Touchup
Button down existing panels
Cross pieces

Fri Nov 6, 2015

Icebreaker - what do you expect to learn?
Overview - thanks to 4 presenters + 6 more.
Outcomes - p. 39. Plus year-long experiment
General workflow.
Today:
Glazed wall w/ sliding vent - 10 - [10]

Glaze wall (no vent) - 9 - [11]

Solid wall (3) [12] - [ + chicken [13]

Install - [14]

Mon Nov 2, 2015

Menards order final addendum - Greenhouse Systems.

Sun Nov 1, 2015

Aqauponics IoT.

Sat Oct 31, 2015

Installing Ledge and Mouse-Proof Foundation Detail. Continuing IoT and Controls started at Greenhouse Systems.

Fri Oct 30, 2015

Mouse-Proof Foundation Detail. Gutters.

Thu Oct 29, 2015

Proposing the OSE Design Guide to align development talent on Roadmap. Exhaustive set of design principles on every front. The intro version and detailed version, focusing on principles rather than details. Appendix with various technicalities explained. Design is main point, where achieving design degeneracy is a critical point of success. This can be the effort that explodes our design capacity nonlinearly. This is phase 1 of massive parallel development. phase 2 is application to other areas of human endeavor outside of integrated, proven design to the R&D phase. This a necessary and nonlinear development that can scale management capacity exponentially. It is a critical ingredient towards method scalability, and can be applied immediately to opensourcing the entire set of industrial mechanical machines with minor electronics and automation.

Instructionals Team refactors SME's procedures, Ex, Oyster Mushrooms into a visual procedure. A PowToon is created. Graphics person creates an icon and an infographic the same day for that machine/concept. Natron person does compositing. Video person uploads youtube links for interactive youtube media. Publishing schedule is daily.

Mushroom Log.

Wed Oct 28, 2015

Hazelnuts stratification. Angora Rabbits. Oyster Mushrooms - refactoring Peter McCoy's instructions. PECS. Negotiating Logistics for Aquaponics Workshop.

Tue Oct 27, 2015

Need to do Shrooms, Logistics, Nuts. Working on Greenhouse Systems. Expanding Arduino IO Capacity. Internet Camera. Automatic Chicken Door.

Mon Oct 26, 2015

Aquaponic Greenhouse IPM. William Clark. Aquaponic Greenhouse Concept - pond designs - [15]. Pond Liner. Added Workshop Marketing Strategy to Roadmap, condition of success being economic relocalization. Polycarbonate weight.

Sun Oct 23, 2015

Aquaponic Greenhouse Concept - pond designs - [16]. Energy Usage of the Internet.

Fri Oct 23, 2015

Developing Greenhouse Systems. Collaborative Literacy Log. Compost Tea Brewer. Rabbits. Golden Berry. Azolla. Aquatic Worms.

Thu Oct 22, 2015

Greenhouse Systems. Dylan Charles. Polycarbonate Glue.

Wed Oct 21, 2015

PECS update. Decided to go with an Arduino and dedicated power driver chip (inverting modulator) Prototyped roof panel, works well for alignment, seals, and screen. Rubber roof seal decided for capping.

Thu Oct 15, 2015

Prototyping a roof panel according to Modular Greenhouse Test Driven Prototypes. Aquaponics workshop minimum attendance achieved 3+ weeks prior to event. Winterizing pool. 3D Printer Workshops.

Wed Oct 14, 2015

Blown Cellulose Insulation. Truck Turning Radius. Building Modular Greenhouse Test Driven Prototypes. Power Electronics Construction Set session 5.

Tue Oct 13, 2015

Very positive results at Runcie Club meeting. MO Western collaboration on a distributive enterprise incubator.

Mon Oct 12, 2015

Modular Greenhouse Test Driven Prototypes added to Modular Greenhouse Development. Development Methodology. Added beginning of Sweet Home 3D instructional. Lime Concrete is real. Updated News Feed with Independent Media.

Sat Oct 10, 2015

Weatherstrip. Greehouse Roof with Sliding Window Instructional. Added Modular Greenhouse BOM. Oyster Mushrooms. Added to Aquaponic_Greenhouse_Publicity_Log

Thu Oct 8, 2015

Greenhouse Wall With Sliding Vent Instructional. Polycarbonate. Found and added to OSE Student Organizations. Ron Arnold's Left Tracking Library. Added Scott's links to Publicity.

Wed Oct 7, 2015

Continuing PECS. Reviewing instructionals for aquaponics - [17]. Car Parts.

Tue Oct 6, 2015

Moving porch. Got workshop on Mother Earth News FB.

Mon Oct 5, 2015

Moving the porch for the aquaponics build. Publicity for aquaponics. Talked to Dan Popovici on BSF breeding and aquatic worms. Sustainable Building Programs and Open Source Housing.

Sat Oct 3, 2015

Team Expectations.

Fri Oct 2, 2015

Ramset Gun. Communication Levels added to Roadmap. Added to Organizational Log. Open Source Video Editors

Thu Oct 1, 2015

Oct 1, 2015 Schedule. Continuing on fish pond in Aquaponic_Greenhouse_Concept. Started Tilapia for specifics of Tillapia rearing. 5000 Gallon Tank. Heritage Wheat. Area Required for a Full Diet. Gutter

Wed Sep 30, 2015

Mobin Rafiq.

Tue Sep 29, 2015

Seedling Rootstocks. Keyline Plantout. Power Electronics Construction Set.

Mon Sep 28, 2015

Post Hole Digger. Modular Greenhouse Build Instructions - working on base wall module. Movement Entrepreneur links. Adde User:Leyan to Open Source Nursery. How to Make a Custom Window Screen Frame. Polycarbonate Installation.

Sun Sep 27, 2015

Posting Aquaponic_Greenhouse_Eventbrite_Announcement. Product Sales.

Sat Sep 26, 2015

Keyline Plantout. Eventbrite announcement draft - Aquapoinics. Mushrooms.

Fri Sep 25, 2015

Posting Aquaponics announcement. OSE Growth Model.Roadmapa Ned its Milestone Areas. About Open Collaboration. Miracle Orchard updated with PV 2 presentation. Oyster Mushrooms. Potato Towers. Best Winter Crops.

Thu Sep 24, 2015

Continuing Aquaponic Greenhouse. Goals: followup and announcement for aquaponic workshop, plus script. Aquaponic Greenhouse 3D CAD. Added to Extreme Manufacturing. Acre Zero Energy Home. Spirulina. Added to OSE News.

Wed Sep 23, 2015

Aquaponics Greenhouse Infographic. Black Soldier Fly. Azolla. Create an Account on the Wiki. Warre Hive.

Tue Sep 22, 2015

Modular Greenhouse Build Instructions. Greenhouse Doors. Span Calculator for roofs and floors. Tankless Water Heater. Protecting Open Innovation. Water Harvesting from the Air. Tillapia Food Pellets. Rabbits.

Mon Sep 21, 2015

Continuing Modular Greenhouse Build Instructions. Added Technology Assessment to Development Template Log. Open House. Calorie Crop Yields. Land Required to Feed One Person.

Sun Sep 20, 2015

Pecans. Disambiguated Aquaponic Greenhouse Development from Modular Greenhouse Development. V-Towers.

Fri sep 18, 2015

Black Walnut.

Thu Sep 17, 2015

Pellet Stove Development. Continuing Heat Exchanger Development. Online Calculators. Thermal Numeracy. Added to Cost of Living. Separated Continuous Charcoal Maker Development from Gasifier Development page. Found Pelletizer Log, added it to Logs. Pellet Burner Development. Water Filter. Tree Guards. Hydraulic Hose Protector.

Wed Sep 16, 2015

Marketing Strategy. Nickel Iron Battery Development. Movement Entrepreneur. Faculty House Development - plumbing and electrical. Refining Collaboration Ecology with Element 14. Capstone Project Collaboration Checklist. Well Drilling Rig Development. Piping and Plumbing Fittings.

Tue Sep 15, 2015

Building-Integrated Beehives. Faculty House Development - Faculty House Wiring. Power Electronics Construction Set. Concrete Pond. Underground Water Tank. Added to Duckweed.

Mon Sep 14, 2015

Badgersett hazelnut picking over the weekend. Open Source Nursery. Roadmap continuing with Infrastructure Building. Aquaponic Greenhouse Development.

Fri Sep 11, 2015

Tech Roadmap fork from Roadmap. Chicken Coop Development. FeF Site Plan updated for Utilities.

Thu Sep 10, 2015

140 modules at Roadmap. Entrepreneur-in-Residence Review. MH 3 Greenhouse Development. Arduino Pellet Stove. Pressure Regulator. CNC Lathe Development Spreadsheet. Supercapacitors. Tesla Torch. Stepper Motor Development. Electric Motor Development. Stepper Driver Development.

Wed Sep 9, 2015

Roadmap work on Background and Research. Verizon Wireless store in Cameron. Reg Orton Discussion. Heat Exchanger Development. Press Forge Development. Fundamentals of Design from MIT. 5 kW Handheld Laser. OSE verizon phone, Ecolo reset at Verizon. Nexus 6 from TED, new sim card. ECNMag.com is a good source for News Feed. Corrosion Scale Inhibitor for hydronics recommendation.

Tue Sep 8, 2015

Roadmap. Started Modular Greenhouse development spreadsheet. OSE Design Framework.
Get phone, set up film studio, do roadmap. Construction and agriculture tools. Video would be good as well. Integrated equipment set cost savings of 10-100 fold. Open Source Fab Lab - get the proper advisory team on this. Fund hiring via risk-share arrangement. From roadmap to HR and teams. Drobo and Raid. Media assets - need a cloud repo.
Tasks on Calendar page.
Quantify cost savings from Construction Set approach - mechanical set, canola oil with additives

Mon Sep 7, 2015

Roadmap. From listing all modules for Burndown, to Team Building and Human Resources.

Sun Sep 6, 2015

Wiki Culture. Potential Natural Vegetation. See finished pictures - Afforestt Workshop.

Fri Sep 4, 2015

Afforestt Workshop and more Roadmap. HR Exam. Sourcing Research

Thu Sep 3, 2015